The 9 Best Water Cooling Loop Cleaner

Primochill Sys Prep was created to address the immense customer requests for a clean and well maintained cooling system. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep.
Specifications

Compatibility: Sysprep is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe!
Instructions
1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of SysPrep into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
3.Add mix to cooling loop.
4.Fill loop with treated water and be sure to remove as many air bubbles as possible.
5.Start loop pump and begin circulating the treated water.
6.Run treated water for at least 12 to 24 hours to ensure loop is properly flushed and treated.  While using for longer periods of time doesn’t have negative effects, Sysprep is not an effective final coolant and should be replaced with coolant before any extended use of computer.
7.Drain System. Inspect drained water for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
8.Fill loop with your choice of coolant and begin water-cooling.**

** Residual treated water left in your loop is not harmful. If you prefer to remove it, do a simple rinse of the loop with fresh DI or Distilled Water. This rinse will not affect the results of the Sys Prep just performed.

Warnings:Do not mix with any pre-mixed coolants as it will over saturate the inhibitors.
PrimoChill is not responsible for any hardware damage. Use at your own risk.

The PrimoChill Rad Clean – Radiator Cleaning Treatment is a solution for cleaning radiators outside of a loop. By using this cleaner you can “”scrub”” the inside of your rad without fear of damaging other components, seals or acrylic! This solution is easy to mix, easy to use, and gets you ready to go!
Specifications

Compatibility
Rad Clean is compatible with the internal metals found in radiators only! Using Rad Clean on nickel items is NOT compatible!
Instructions
For this pre-treatment to work correctly follow the instructions below. 
Step 1: Dilute one half bottle of RadClean into 32oz of distilled/Ro/Di water.
Step 2: Fill radiator up with Radclean mixture
Step 3:Close both ports with plastic fillports. Ensure they’re plastic. Shake radiator.
Step 4:Let your radiator sit for one hour.
Step 5:Drain radiator and flush radiator extensively with distilled/ro/di water
Step 6:Drain radiator and let dry completely.
Warnings
Important to use plastic fittings when cleaning radiators while using Rad Clean! PrimoChill is not responsible for any hardware damage. Use at your own risk.

As with all of PrimoChill’s high performance cooling system fluids and additives, Liquid Utopia is safe, non toxic, and biodegradable. Liquid Utopia is the only single use additive available in today’s market that provides a broad spectrum of coverage and has the ability to be dyed to your color choice by adding a PrimoChill Intensifier(sold separately). No matter which of the twelve colors you choose, PrimoChill’s Liquid Utopia makes life easy for you, and short for Algae and Corrosion.

********DO NOT MIX WITH THE PRE MIXED PC ICE OR PC PURE********
Warnings/Cautions: * Liquid Utopia is made with earth friendly ingredients and carries a broad spectrum of anti-microbial agents. If you notice white sediment in your loop, it is most likely Liquid Utopia has been hard at work! White sediment may be present for some time, depending on the amount of existing contaminants. Do not mix with any pre-mixed coolants as it will over saturate the inhibitors, this includes Silver Coils as they act as a antimicrobial component.
Tyler Direct is not responsible for any hardware damage. Use at your own risk.

Now making custom bends with rigid tubing could not be easier. With the PrimoChill Rigid Tubing 45/90/180 Degree Bending Kit – 1/2 in. OD you can make consistent bends every time!  Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size.  These tool has mount holes that allow you to mount to a hard surface for a more permanent work station.
Features

Specifications
Compatibility

Parts Included

Warnings
Practice using the bending tool on some scrap rigid until you get the hang of how best to use it!
PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

True is an environmentally friendly fill and forget coolant solution that alleviates stress and concern over possible leaks in your next computer watercooling system. It provides significant benefits of increased performance and aesthetics without the headaches. True delivers continuous protection against algae and corrosion and is safe for your PC components. Whether you’re new to watercooling, or a seasoned pro, True is the coolant for you .

Bottle Size: 8 fluid ounces
Shelf Life: 2 years (unopened)
Mix Ratio: Add to 1 gallon Distilled Water
Included:1x Sys Prep 15ml / 1x True 8oz

Note:Primary pictures shows fluid mixed and in a reservoir (not included) to illustrate the final color.

WARNING: Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.

This wash bottle is used to wash labware and to store washing solutions, such as acetone or deionized water. The LDPE (low-density polyethylene) body is lightweight, flexible, and elastic, has an opaque hue, and resists impact, stress cracks, and moisture absorption. Its Boston round shape is used for applications that require a rounded body, short neck, and narrow mouth to store liquid samples, solvents, and chemicals, and dry materials. The screw closure has its stem and draw tube molded in one piece for leak-proof applications, and its angled dispensing nozzle directs the stream of liquid. The spout can be cut back to increase the flow of washing solution. This bottle is suitable for storing and transporting labware washing solutions. Lab bottles are used to store, hold, and mix liquids, powders, and other substances in a wide variety of scientific industries. Lab bottles have a more pronounced neck and shoulder than jars. Lab bottles are manufactured with a combination of characteristics in order to meet the demands of particular applications, such as for solution dispensing, mixing, and weighing, and use in centrifuge operations. They come in many shapes for specific applications, with a variety of mouth or nozzle shapes and sizes for specific use. Lab bottles are made from materials, such as glass (borosilicate or soda-lime) and an array of plastics, which are selected for chemical and thermal expansion resistance, transparency, and their adaptability in a variety of applications. Lab bottle interiors, caps, and lids are often lined with a protective material. Caps and lids help seal bottles to prevent solutions from spilling. The capacity refers to the fluid amount held by a lab bottle, and is commonly measured in milliliters (mL) and liters (l), and sometimes in ounces (oz). Lab bottles are suitable for use in chemistry and biology applications, as well as in pharmaceutical and scientific testing.

Conclusion

By our suggestions above, we hope that you can found water cooling loop cleaner for you.Please don’t forget to share your experience by comment in this post. Thank you!