Best Tankless Propane Hot Water Heaters

V53DeP is the perfect combination of high efficiency, comfort and value in a propane gas tankless water heater from Rinnai. Ideal for small to medium homes or remodels, compact, easy-to-install, reliable and perfect for outdoor locations; Rinnai products provide peace of mind with warranties that surpass the competition.

Please Note:

1、When install the water heater please do not over tighten the connectors and pipes to prevent it from bursting and leaking.

2、The exhaust and top will get hot, please check around area for flammables, especially gasoline or other vapors which may ignite. Please make sure there are no foreign objects around the portable tankless water heater or have fallen into the top.

3、A gas leak detection is needed before use and please do not use flame for leak detection. Soapy solution, gas detectors, etc. are recommended to detect leaks.

4、Please use only liquid propane as fuel and use it in a well-ventilated place.

5、Please make sure there is enough water pressure. If the water pressure is below 2.5 PSI, the water heater cannot be ignited.

6、If the outside temperature is around or below freezing(0℃/32℉), please ensure to drain out the water after each use to avoid internal damage to the heat exchanger.

7、This water heater is not suitable for high altitude areas over 3300 feet and strong wind conditions.

MAREY GA10LP Indoor Propane Gas Tankless Water Heater can provide up to 2. 7 Gal. per minute for a perfect shower at 115°F output water temperature. It is also called water heater on demand, because it heats water only when needed, saving energy. It is designed in the USA and it’s perfect to supply endless hot water for up to 2 or 3 points of use simultaneously (for a variety of residential hot-water applications). Its compact design saves space and is easy to install: you will only need 2-D cell battery for the ignition and a venting (not included in the box). MAREY has been on the water heating business since 1955, bringing tradition and innovation together.

120V – requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2″ of foam insulation. Glass lined tank for longer life. 6 year warranty on heater and 1 year warranty on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90.1. See Info Page for technical and installation specifications.

Features:

Automatic ignition system
Flame failure protection device
Water & gas combination unit
Fitted with over heating and pressure safeguard
Suitable for both summer and winter
20 min off self-timer
Mains power not required
Electrical requirement: DC3V, Automatic electric ignition powered by two (2) size ‘D’ batteries (batteries not included); No electrical hook up; No standing pilot;
Net weight: 7.2KG

Vent Type:4.3″ Flue Duct
Warranty: 3 years for parts
Certification: ISO 9001:2000

Description:

1. High efficient energy saving : the heater exchanger and main burner adopt mostly advanced energy-saving and combustion technology to decrease gas consumption and burning noise.
2. Low water-pressured startup : the water control linkage valve makes the heater start up under low water pressure and shortage areas and those living in high stairs.　
3. Manifold auto protection : for the sake of your safety　
4. Ion flame inspection : to automatically shut down gas power under unexpected flameout.　
5. Over water pressure protection function : to automatically decrease pressure under excessive high water pressure.
6. Controller design : both cold water and warm water can be properly controlled
7. Magnificent thin-shaped appearance : it is designed by modern fashionable line shape.

Attention:
NPT 1/2″ female to G 1/2″ male(G 1/2″ to NPT 1/2″ Adapter NOT INCLUDE, If you need please contact us.Thank you.)

EASY TO USE
⊙ Attach the 3/4″ GHT garden hose adapter to the fitting marked “water input” and the shower head to the “Water Outlet”
⊙ Install gas supply line and regulator to the portable tankless water heater and attach gas regulator with hose to the LP cylinder
⊙ Install two “D” cell batteries with correct direction and turn on water supply
⊙ Turn your water output device to its “off” position while the gas valve on the cylinder all the way open
⊙ Set the water knob(blue one) to its highest setting(left position) and the gas knob(red one) to its minimum setting(left position)
⊙ Turn on your water output device to the “on” position and adjust to the desired water flow
⊙ Open the drain valve to ensure draining of water upon completion of use or storage and turn off your gas supply
PRECAUTIONS
⊙ When install the water heater please do not over tighten the connectors and pipes to prevent it from bursting and leaking
⊙ The exhaust and top will get hot, please check around area for flammables, especially gasoline or other vapors which may ignite. Please make sure there are no foreign objects around the portable tankless water heater or have fallen into the top
⊙ Please use only liquid propane as fuel and use it in a well-ventilated place.If you want to install indoors, use a pipe to cover the vent hole to ensure that the gas can be led to the outside
⊙ Please make sure there is enough water pressure. If the water pressure is below 2.5 PSI, the water heater cannot be ignited
⊙ If the outside temperature is around or below freezing(0℃/32℉), please ensure to drain out the water after each use to avoid internal damage to the heat exchanger
⊙ Water heater is not suitable for high altitude areas over 3300 feet and strong wind conditions
LIST
1 x 1.58GPM portable gas hot water system
1 x instruction manual
1 x 5 feet CSA regulator
1 x gas inlet connector
1 x shower head set

The Eccotemp i12 Liquid Propane 3 GPM Tankless Water Heater has a new revolutionary design, making it unlike any other tankless water heater on the market today. The Eccotemp i12-LP is perfect for vacation cabins, cottages, and smaller homes. This model features sleek black tempered glass paneling, fully automatic temperature controls for precision, and a touch screen with an LED temperature display that shows output temperature and GPM flow. The i12-LP is also equipped with child locking technology. The Eccotemp i12-LP is a liquid propane powered, indoor model designed for small to medium hot water production where you need more than one hot water application at the same time. This model also offers a 35-40 degree Fahrenheit temperature rise when operating at a flow rate of 4 GPM and a 77-degree Fahrenheit temperature rise at 1.5 GPM. This bundle comes with a horizontal stainless steel vent kit, ready to install and with its 110-volt UL listed power cord powering the internal exhaust fan and digital display. The i12 only pulls about 2 watts while idle and 1.07 Amps during operation, making it an ideal energy efficient appliance.

Product Features

• Sleek, modern design with black tempered glass front panel
• Equipped with child locking technology
• Pulls about 2 watts idle and 1.07 Amps during operation
• Fully automatic temperature controls
• Horizontal Stainless Steel vent kit included
• Perfect for vacation cabins, cottages, and smaller homes
• Hot water capacity range: 0.6 – 4.8 GPM; Maximum / Minimum gas rate: 25,000 – 80,000 BTUs

What’s in the box?

• 1 x 2 1/2″ 90 degree Elbow with Backflow Preventer
• 1 x Wall Thimble
• 1 x 2 1/2″ x 20″ Termination Pipe
• 1 x Instruction Manual
• 1 x 110 volt UL listed power cord

Conclusion

By our suggestions above, we hope that you can found tankless propane hot water heaters for you.Please don’t forget to share your experience by comment in this post. Thank you!