Best Reptile 2 Plug Heating Thermostat

Deal Score0
Deal Score0
  • Best Reptile 2 Plug Heating Thermostat
  • Best Reptile 2 Plug Heating Thermostat
  • Best Reptile 2 Plug Heating Thermostat
  • Best Reptile 2 Plug Heating Thermostat
  • Best Reptile 2 Plug Heating Thermostat
  • Best Reptile 2 Plug Heating Thermostat
  • Best Reptile 2 Plug Heating Thermostat
  • Best Reptile 2 Plug Heating Thermostat

Nowadays, there are so many products of reptile 2 plug heating thermostat in the market and you are wondering to choose a best one. You have searched for reptile 2 plug heating thermostat in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings reptile 2 plug heating thermostat which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

Best results for reptile 2 plug heating thermostat

iPower 2-Pack 40-108 Degrees Fahrenheit Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing, Black

$24.5$35$48.65
Last update was on: Saturday, December 28, 2019

The iPower heat mat thermostat provides constant customized temp seed germination, reptiles and brewing. It is ideal for maintain rooting temperature in a tray and dome. Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures. This heat mat controller is compatible with all heat mats, but is optimized for iPower seedling heat mats. Features: 1. Controls temperature in colder or warmer environments2. Digital temperature controller for heat mat3. Provides constant optimum temperature for specific crops4. Digital thermostat provides temperature control between 40°F-108°F (5-42°C), temperature display range: 32 -140°F5. Celsius or Fahrenheit read-out6. Specs: 120 Volts / 8 Max Amps / 60 HZ / 1000 Watts7. Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug8. CETL certification is proof that a product complies with widely-accepted safety standards9. 1 Year Manufacturer Seeding Heat Mat Setup Instructions:Place sensor into the rooting area about 1″- 1-1/2″Position thermostat up and away from seedling trays and stray water. Do not submergePlug heat mat into thermostatPlug in thermostat power cord and set maximum desired temperatureHeat mat thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature. NOTE: Please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment. Abnormal Warning:If thermostat shows “E1”, it means that the actual temperature is lower than 0 degree Celsius or 32. 0 degrees FahrenheitIf thermostat shows “E2”, it means that the actual temperature is higher than 60. 0 degrees Celsius or 108. 0 degrees FahrenheitIf thermostat shows “E3”, it means that the temperature sensor is not working properly. Please re-install the sensor

Inkbird ITC-306T Pre-Wired Electronic Heating Thermostat Temperature Controller and Digital Timer Controller for Aquarium, Seed Germination, Reptiles, Hatching ect, Without Cooling Controlling

$20.99$29.99$43.19
Last update was on: Saturday, December 28, 2019

Inkbird day and night temperature controller is a pre-wired heating output temperature controller (No Cooling Control) with time function specifically for breeding and planting.
It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants.
It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
With large power output 1,200W, it’s suitable for most applications. And the temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.

Specification:
Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 °C / 0.1°F
Temperature Accuracy:±1°C (-50~70°C) / ±1°F (-58~160°F)
Input Power : 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Ambient Temperature: -30~ 75 °C / -22~ 167 °F
Storage Temperature: -20~ 60 °C / -4~ 140 °F
Humidity: 20~85% (No Condensate)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Relay Contact Capacity: Heating (10A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3 inch.)
Socket Dimension: 85x42x24mm (3.3×1.7×1 inch.)
Warranty: 1 Year

Package Included:
1 x Temperature and Time Controller
1 x Manual

HEATIT ET-21 Freeze Thermostatically Controlled Outlet On at 38F /Off at 50F

$8.39$11.99$17.39
Last update was on: Saturday, December 28, 2019

iPower 40-108 Degrees Fahrenheit Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing, Black

$12.59$17.99$20.15
Last update was on: Saturday, December 28, 2019

Size:Heat Mat Thermostat Controller

“The iPower heat mat thermostat provides constant customized temp seed germination, reptiles and brewing. It is ideal for maintain rooting temperature in a tray and dome. Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures. This heat mat controller is compatible with all heat mats, but is optimized for iPower seedling heat mats. Features: 1.Controls temperature in colder or warmer environments 2.Digital temperature controller for heat mat 3.Provides constant optimum temperature for specific crops 4.Digital thermostat provides temperature control between 40°F-108°F (5-42°C), temperature display range: 32 -140°F 5.Celsius or Fahrenheit read-out 6.Specs: 120 Volts / 8 Max Amps / 60 HZ / 1000 Watts 7.Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug 8.CETL certification is proof that a product complies with widely-accepted safety standards 9.1 Year Manufacturer Warranty Seeding Heat Mat Setup Instructions: Place sensor into the rooting area about 1″”- 1-1/2″” Position thermostat up and away from seedling trays and stray water. Do not submerge Plug heat mat into thermostat Plug in thermostat power cord and set maximum desired temperature Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature. NOTE: Please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment. Abnormal Warning: If thermostat shows “”E1″”, it means that the actual temperature is lower than 0 degree Celsius or 32.0 degrees Fahrenheit If thermostat shows “”E2″”, it means that the actual temperature is higher than 60.0 degrees Celsius or 108.0 degrees Fahrenheit If thermostat shows “”E3″”, it means that the temperature sensor is not working properly. Please re-install the sensor”

Similar items with 4 stars and above

Heating Thermostat Aquarium Probe Sensor Inkbird ITC-306T Heater Temperature Controller Pre-Wired Dual Stage Timer Time Switch ONLY HEAT Outlet AC 100~240V 1200W NO Cooling

$20.99$29.99$43.19
Last update was on: Saturday, December 28, 2019

Features:

Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 ° C / 0.1° F
Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-58 ~ 160° F)
Temperature Control Mode: On/Off Control, Heating, No cooling control
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Relay Contact Capacity: Heating (10A, 100-240VAC)
Sensor Type: aquarium sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature:-20~ 60 ° C / -4~ 140 ° F
Humidity:20~85% (No Condensate)
Dimension:
Body:140x68x33mm (5.5×2.7×1.3 inch.)
Socket:85x42x24mm (3.3×1.7×1 inch.)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
NET Weight: About 0.35kg (0.77lb)
Temperature calibration
Over-temperature and sensor fault alarm
Warranty: 1 Year

Package Content:
1x Temperature controller ITC-306T with Aquarium Probe
1x Manual

Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1100W With 6.65ft DC Cord NTC Stainless Probe Sensor for Aquarium, Incubator ect

$25.2$36$41.4
Last update was on: Saturday, December 28, 2019

Size:ITC-308S+SHORT probe

Features:
Plug and play design, easy to use;
Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load: 1100W(110V);
Dual display window, be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Over-temperature and sensor fault alarm
Temperature calibration;
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.

Specification
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year

Package Content:
1x ITC 308S Temperature Controller;
1x 6.65ft DC Cord NTC Sensor
1x Manual

Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control

$19.6$28$37.52
Last update was on: Saturday, December 28, 2019

Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year

Package Included:
1x ITC-308 Temperature Controller
1x Manual

KETOTEK KT4000 Digital Temperature Controller Outlet Thermostat, 2 Stage Heating and Cooling Mode US Plug 1100W with Sensor for Homebrew, Aquarium, Incubator, Pet Breeding, Reptiles

$24.42$34.88$51.62
Last update was on: Saturday, December 28, 2019

Inkbird Temperature Controller ITC-308 Thermostat 110V, 1100W Pre-Wired Dual Stage Digital Outlet Heating & Cooling for Homebrewing Refrigerator etc.

$25.19$35.99$51.11
Last update was on: Saturday, December 28, 2019

Size:ITC-308 Heating & Cooling Thermostat

Features:

Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year

It has certificate of EMC, LVD, RoHS, FCC compliance.

Package Content:
1x Temperature controller ITC308
1x Manual

Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding

$24.5$35$48.65
Last update was on: Saturday, December 28, 2019

Conclusion

By our suggestions above, we hope that you can found reptile 2 plug heating thermostat for you.Please don’t forget to share your experience by comment in this post. Thank you!

10 Total Score
Excellent

Best reptile 2 plug heating thermostat: Top-Rated Brands & What to Buy

User Rating: 4.49 (664 votes)