gadfurniture 
Nowadays, there are so many products of receiver or amplifier cooling fans in the market and you are wondering to choose a best one. You have searched for receiver or amplifier cooling fans in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings receiver or amplifier cooling fans which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Receiver or Amplifier Megabase 12 Volt Trigger-Controlled Cooling Fans (12v), with multispeed Control, for Home Theater
- This super low-noise dual-120mm fan unit is designed to sit on your receiver’s top air vents. It has a special raised air-chamber base, which covers 145 square inches, and air is drawn out over the entire area of this raised base.
- The system includes a 12 volt trigger control module, which turns the fan on and off, under the control of your component’s 12v trigger socket. The 12v module controls the power from the cooling system’s multi-speed transformer, directing it to the fans when it detects a 12v signal. In addition, you control the speed of the fans, with the multi-speed power controller.
- IMPORTANT: Some receivers have a non-standard setup, where the receiver doesn’t directly control the trigger (for example, the trigger might be under the control of Zones 2 or 3, etc.). Please consult your receiver’s manual for details about how its 12v trigger operates, or contact me if you have questions.
- Recommended fan speeds for this system: The fans (running together) are rated at 13db while moving 50 cubic feet of air per minute at 1/3 speed, or 16db & 72CFM at 1/2 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 2/3 speed = 19db/98CFM, 3/4 speed = 22db/110CFM, full speed = 25db/148CFM.
- The Megabase cooling unit measures 14.5″ wide, and 10″ deep. It is 1-1/2″ tall, and only requires about 1/4 inch of additional space above for airflow.
OVERVIEW: This cooling system has two high-quality, low-noise 120mm fans, with long-lasting and quiet fluid dynamic bearings.
It includes a 12 volt trigger control module, which turns the fan on and off, under the control of your receiver’s 12v trigger socket. The module detects the 12v signal, then sends the power from the cooling sysem’s transformer to the fans.
The fan unit has a specially-constructed raised air-chamber base that enlarges the area of airflow, while also sealing air and preventing vibrations. This base covers over 145 square inches. Please make sure that the top of your component has a flat area on top that is at least 14.5″ x 10″. Don’t worry if your air vents are smaller (or larger) than the air-chamber base — it will work with any size vents.
THE COOLING SYSTEM INCLUDES: 1 x dual-120mm (2 fans) Megabase fan unit, 1 x 12v trigger control module, 1 x 5 speed power transformer, and printed installation instructions. All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
SETUP: The system comes completely assembled, with all components installed, wired and ready to go! Just plug the power transformer into an AC outlet, and drop the fan unit on top of your receiver’s top air vents.
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid return shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.
AC Infinity AIRCOM S7, Quiet Cooling Fan System 12" Top-Exhaust for Receivers, Amps, DVR, AV Cabinet Components
- A quiet fan system designed for cooling routers, modems, game consoles, and other AV components.
- Protects components from overheating, performance issues, and shortened lifespans.
- Programming features two thermal trigger modes and four speed control options.
- Contains two dual-ball bearing fans with PWM-controlled motors to minimize noise.
- Dimensions: 11.6 x 6.3 x 1.5 in. | Exhaust: Top | Airflow: 140 CFM | Noise: 19 dBA
AC Infinity AIRCOM S9, Quiet Cooling Fan System 17" Top-Exhaust for Receivers, Amps, DVR, AV Cabinet Components
- A quiet fan system designed for cooling receivers, game consoles, and other AV components.
- Protects components from overheating, performance issues, and shortened lifespans.
- Programming features two thermal trigger modes and four speed control options.
- Contains three dual-ball bearing fans with PWM-controlled motors to minimize noise.
- Dimensions: 17 x 13.5 x 1.5 in. | Exhaust: Top | Airflow: 210 CFM | Noise: 21 dBA
Overview
A quiet cooling fan system designed to be placed on top of AV components such as receivers, amplifiers, and DVRs. Maintaining an optimal temperature for components prevents overheating, ensures constant performance, and extends their lifespan. The controller on the front of the cooling system features a smart thermostat trigger and fan speed control. The steel enclosure houses three dual-ball bearing fans that pulls heat out of the component and exhausts upwards. Its low-profile design enables the unit to fit in tight spaces. Includes corded power adapter to plug the fan system through an outlet.
Intelligent Programming
There are three programming settings available which includes two temperature trigger modes. The fans can also be set to run continuously or be turned off. Four fan speeds are available for each active mode and will determine the speed at which the fans run when they are triggered. This ensures optimal airflow and noise levels for your application.
Design and Construction
Each system features dual-ball bearing fans rated at 67,000 hours and are certified by CE and RoHS. Fans contain a PWM-controlled motor used to minimize noise during speed variations and are suspended in mid-air with silicone mounts to absorb vibrations. A low-profile design allows the unit to fit in applications with a limited height clearance. Aluminum and steel construction enables additional components up to 30 pounds to be stacked on top.
AC Infinity AIRCOM S6, Quiet Cooling Blower Fan System 12" Rear-Exhaust for Receivers, Amps, DVR, AV Cabinet Components
- A quiet fan system designed for cooling routers, modems, game consoles, and other AV components.
- Protects components from overheating, performance issues, and shortened lifespans.
- Programming features two thermal trigger modes and four speed control options.
- Contains two dual-ball bearing blowers with PWM-controlled motors to minimize noise.
- Dimensions: 11.6 x 6.3 x 1.5 in. | Exhaust: Rear | Airflow: 100 CFM | Noise: 20 dBA
AC Infinity AIRCOM T9, Quiet Cooling Fan System 17" Top-Exhaust for Receivers, Amps, DVR, AV Cabinet Components
- A quiet fan system designed for cooling receivers, amplifiers, DVRs, and other AV components.
- Protects components from overheating, performance issues, and shortened lifespans.
- LCD thermostat programming with six speed controls, alarm alerts, failure triggers, and memory.
- Contains three dual-ball bearing fans with PWM-controlled motors to minimize noise.
- Dimensions: 17 x 13.5 x 1.5 in. | Exhaust: Top | Airflow: 210 CFM | Noise: 21 dBA
Overview
A quiet cooling fan system designed to be placed on top of AV components such as receivers, amplifiers, and DVRs. Maintaining an optimal temperature for components prevents overheating, ensures constant performance, and extends their lifespan. The LCD digital controller on the front of the system features a smart thermostat with speed control and status alerts. The steel enclosure houses three dual-ball bearing fans that pulls heat out of the component and exhausts upwards. Its slim low-profile design enables the unit to fit in tight spaces. On the backside are ports to connect and control additional fans. Includes corded power adapter to plug the fan system through an outlet.
Intelligent Programming
Programming includes an easy-to-use thermostat and a SMART mode that automatically adjusts the fan’s speed to react to varying temperatures. Additional features include alarm alerts, fan failure triggers, power savings setting, display lock, and backup memory. Six fan speeds are available with three screen brightness settings. Behind the unit are ports that can control up to six individual AC Infinity AIRPLATE Cabinet fans and MULTIFAN Component fans.
Design and Construction
Each system features dual-ball bearing fans rated at 67,000 hours and are certified by CE and RoHS. Fans contain a PWM-controlled motor used to minimize noise during speed variations and are suspended in mid-air with silicone mounts to absorb vibrations. A low-profile design allows the unit to fit in applications with a limited height clearance. Aluminum and steel construction enables additional components up to 30 pounds to be stacked on top.
AC Infinity AIRCOM S10, Quiet Cooling Blower Fan System 17" Front-Exhaust for Receivers, Amps, DVR, AV Cabinet Components
- A quiet fan system designed for cooling receivers, amplifiers, DVRs, and other AV components.
- Protects components from overheating, performance issues, and shortened lifespans.
- Programming features two thermal trigger modes and four speed control options.
- Contains three dual-ball bearing blowers with PWM-controlled motors to minimize noise.
- Dimensions: 17 x 13.5 x 1.5 in. | Exhaust: Front | Airflow: 160 CFM | Noise: 24 dBA
Overview
A quiet cooling fan system designed to be placed on top of AV components such as receivers, amplifiers, and DVRs. Maintaining an optimal temperature for components prevents overheating, ensures constant performance, and extends their lifespan. The controller on the front of the cooling system features a smart thermostat trigger and fan speed control. The steel enclosure houses three dual-ball bearing blowers that pulls heat out of the component and exhausts out the front. Its low-profile design enables the unit to fit in tight spaces. Includes corded power adapter to plug the fan system through an outlet.
Intelligent Programming
There are three programming settings available which includes two temperature trigger modes. The fans can also be set to run continuously or be turned off. Four fan speeds are available for each active mode and will determine the speed at which the fans run when they are triggered. This ensures optimal airflow and noise levels for your application.
Design and Construction
Each system features dual-ball bearing blowers rated at 67,000 hours and are certified by CE and RoHS. Blowers contain a PWM-controlled motor used to minimize noise during speed variations and are suspended in mid-air with silicone mounts to absorb vibrations. A low-profile design allows the unit to fit in applications with a limited height clearance. Aluminum and steel construction enables additional components up to 30 pounds to be stacked on top.
AC Infinity AIRPLATE S2, Quiet Cooling Blower Fan System 6" with Speed Control, for Home Theater AV Cabinets
- An ultra-quiet blower system designed for cooling cabinets that requires minimal noise.
- Low-profile aluminium frame is ideal where mounting space is limited or a smaller footprint is desired.
- Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.
- Powered by wall outlet or USB port, included Turbo Adapter increases performance by 25%.
- Dimensions: 5.8 x 2.0 x 4.7 in | Airflow: 35 CFM | Noise: 17 dBA | Bearings: Dual Ball
AC Infinity AIRCOM S8, Quiet Cooling Blower Fan System 17" Rear-Exhaust for Receivers, Amps, DVR, AV Cabinet Components
- A quiet fan system designed for cooling receivers, amplifiers, DVRs, and other AV components.
- Protects components from overheating, performance issues, and shortened lifespans.
- Programming features two thermal trigger modes and four speed control options.
- Contains three dual-ball bearing blowers with PWM-controlled motors to minimize noise.
- Dimensions: 17 x 13.5 x 1.5 in. | Exhaust: Rear | Airflow: 160 CFM | Noise: 24 dBA
Overview
A quiet cooling fan system designed to be placed on top of AV components such as receivers, amplifiers, and DVRs. Maintaining an optimal temperature for components prevents overheating, ensures constant performance, and extends their lifespan. The controller on the front of the cooling system features a smart thermostat trigger and fan speed control. The steel enclosure houses three dual-ball bearing blowers that pulls heat out of the component and exhausts out the rear. Its low-profile design enables the unit to fit in tight spaces. Includes corded power adapter to plug the fan system through an outlet.
Intelligent Programming
There are three programming settings available which includes two temperature trigger modes. The fans can also be set to run continuously or be turned off. Four fan speeds are available for each active mode and will determine the speed at which the fans run when they are triggered. This ensures optimal airflow and noise levels for your application.
Design and Construction
Each system features dual-ball bearing blowers rated at 67,000 hours and are certified by CE and RoHS. Blowers contain a PWM-controlled motor used to minimize noise during speed variations and are suspended in mid-air with silicone mounts to absorb vibrations. A low-profile design allows the unit to fit in applications with a limited height clearance. Aluminum and steel construction enables additional components up to 30 pounds to be stacked on top.
Receiver or Amplifier 12 Volt Trigger-Controlled Cooling Fans (12v) with Enlarged Airchamber Bases & multispeed
- These two high-quality, super low noise 80mm fan units are designed sit on your component’s top air vents. Each fan has a special raised air-chamber base, which covers nearly twice the area of a standard fan. A vortex of air is pulled out of the top of your component over the full area of these raised bases.
- In addition, you control the speed of the fans, with the multi-speed power controller.
- The system includes a 12 volt trigger control module, which turns the fan on and off, under the control of your component’s 12v trigger socket. The 12v module controls the power from the cooling system’s multi-speed transformer, directing it to the fans when it detects a 12v signal.
- IMPORTANT: Some receivers have a non-standard setup, where the receiver doesn’t directly control the trigger (for example, the trigger might be under the control of Zones 2 or 3, etc.). Please consult your receiver’s manual for details about how its 12v trigger operates, or contact me if you have questions.
- Recommended fan speeds for this system: The two fans (running together) are rated at 13db while moving 31 cubic feet of air per minute at 1/2 speed, or 16db & 41CFM at 2/3 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 1/4 speed = 10db/16CFM, 3/4 speed = 19db/46CFM, full speed = 22db/62CFM.
OVERVIEW:
This cooling system has two high-quality, low-noise 80mm fans, with long-lasting and quiet Fluid Dynamic bearings.
Also includes a 12 volt trigger control module, which turns the fan on and off, under the control of your receiver’s 12v trigger socket. The module detects the 12v signal, then sends the power from the cooling sysem’s transformer to the fans.
The fans have a specially-constructed 4-3/4″ square raised air-chamber base that covers twice the area of a standard fan, while also sealing air and preventing vibrations. Each fan is 1-1/2″ tall and only requires 3/8″ of space above for air flow.
The system has a power transformer, which plugs into an AC outlet. You can set this power unit to any one of 5 different speeds.
THE COOLING SYSTEM INCLUDES: 1 x dual-80mm (two fans) component fan unit, 1 x 12 volt trigger module, 1 x multi-speed power transformer, and printed installation instructions. All cooling system parts connect with special heavy-duty Molex plugs, which allows the parts to be separated for easy wire-routing.
SETUP: The system comes completely assembled, with all components installed and ready to go! Just plug the power transformer into an AC outlet, insert the 12 volt trigger plug into your receiver’s 12v socket, and drop the fans on top of your receiver’s top air vents.
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — contact me (through Amazon) and I will send you a prepaid shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.
AC Infinity AIRPLATE T7, Quiet Cooling Fan System with Thermostat Control, for Home Theater AV Cabinets
- An ultra quiet fan system designed for cooling cabinets that requires minimal noise.
- Features an onboard processor that provides a digital readout of the cabinets temperatures.
- Programming includes thermostat control, fan speed control, and SMART energy saving mode.
- Fan and controller contain CNC machined aluminum frames with a modern brushed black finish.
- Dimensions: 11.7 x 6.1 x 1.3 in. | Airflow: 104 CFM | Noise: 19 dBA | Bearings: Dual Ball
Conclusion
By our suggestions above, we hope that you can found receiver or amplifier cooling fans for you.Please don’t forget to share your experience by comment in this post. Thank you!
