Best Ram Water Cooling Block

High performance waterblock with RGB lighting, for DDR memory sticks. This product requires XSPC Universal Side Plate Set to support DDR3, VLP DDR3 and DDR4. (VLP DDR4 not supported). Features High performance copper base 127x40x3mm, Acrylic layer with chromed metal frame, Low flow restriction, G1/4? threads, and supports 2-4 sticks of DDR (XSPC replacement side plates required). Supplied with thermal pads, RGB controller and two RGB LEDs.

Model: 5060175589200

The EK-FC Radeon VII water block with nickel plated cooling plate and acetal top directly cools the GPU, memory and VRM as liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance.

The EK Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speeds and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios.

The base of the block is made of nickel-plated electrolytic copper while the top is made of high-quality acrylic. Sealing is ensured by high-quality EPDM O-Rings. The front corner piece is lit up with LED strip.

This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

G1/4″ threaded fittings can be used on both sides of the FC terminal.

Enclosed:
– EK-FC Radeon VII series water block
– Mounting mechanism with screw-in brass standoffs
– Necessary mounting screws, nuts, and washers
– 2x EK plug G1/4”
– 6mm Allen key
– Thermal pads
– Thermal grease EK-TIM Ectotherm (1g)

PLEASE NOTE:

Fittings are just for show and are not included!
This product should NOT be installed with any aluminum Fluid Gaming parts!
Radeon VII stock backplates are compatible with EK-Vector Radeon VII water blocks only if installed with the stock backplate screws.

Model: 3831109816165

The EK-Vector FTW3 RTX 2080 Ti RGB high-performance water block is specially designed for EVGA FTW version of NVIDIA® GeForce® RTX 2080 Ti graphics cards. The water block features a unique aesthetic cover over the block Terminal which is designed to showcase the graphics card model via LEDs, visible from the side.

The water block directly cools the GPU, VRAM and the VRM, and uses an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with pumps running at slower speeds. The jet plate and fin structure has been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed flow.

The base of the block is CNC machined out of nickel-plated copper while the top is CNC machined out of acrylic. Sealing is ensured by EPDM O-rings.

It features four integrated LED sources, two located in the terminal cover and one LED strip on each end of the water block which is compatible with the motherboard 4-pin 12V RGB LED header. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

G1/4″” threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to our offer of Scalar GPU Terminals.

Both the NVIDIA® and EVGA NVLink™ are compatible with this water block.

Enclosed:

– EK-Vector FTW3 series high-performance water block
– Necessary mounting hardware
– 2x Nickel plated brass plug G1/4”
– 6mm Allen key
– Thermal pads
– Thermal grease

PLEASE NOTE:
EVGA FTW3® RTX 2080Ti factory backplate is not compatible with this water block. This product should NOT be installed with any aluminum Fluid Gaming parts!

Model: 3831109816783

The EK-Annihilator Pro Narrow ILM is a dedicated server grade water block with 1U chassis compatibility which was specifically developed for LGA 3647 (Socket P) Intel® processors. The new server/workstation-grade CPU block is 1U chassis type compatible for use with server racks. This enterprise cooling solution is built for performance, reliability, serviceability and no compromises in mind.

The EK-Annihilator PRO Narrow water block features a total of 9 ports, which allow for versatile connectivity options. Three ports located on the top are standard G1/4″ threaded and are intended for workstations and taller server racks, while the 6 side ports, for low profile usage, are G1/8″ threaded.

EK-Annihilator PRO Narrow water block features a precisely machined copper base (‘cold plate’) which is made from purest copper available on the market and is treated with nickel electroplating. The top is made from CNC machined from thick and sturdy black POM Acetal and the CPU Square ILM and Narrow ILM hold-down brackets are made of laser cut stainless steel.

Intel® CPU socket compatibility:

• LGA 3647 (Socket P) Square ILM

Enclosed:

• EK-Annihilator Pro Narrow ILM CPU Water Block
• Necessary mounting screws, nuts, and washers
• 3x EK plug G1/4”
• 6x EK plug G1/8”
• 2x HFB Barb Fitting 6mm
• 2x HFB Barb Fitting 10mm
• 2x Barb clamp 6mm
• 2x Barb clamp 10mm
• 6mm Allen key
• 5mm Allen key
• 4mm Allen key
• 3/16mm Allen key
• Thermal grease (1g)

PLEASE NOTE:

1U chassis compatibility is guaranteed only with side G1/8″ ports being used.
The CPU block is equipped only with Narrow ILM mounting hold down.
This product should not be installed with any aluminum Fluid Gaming parts.

Model: 3831109813911

Pacific A1 DDR4 RAM water block is a Ram water block that comes with four sets of RAM heat sinks to provide two-way heat dissipations for RAM. The copper-based water block allows liquid cooling and the aluminum heat sinks provides heat sinks convection for the Ram. The water block is built with 12 high lumens addressable LEDs of 16.8M colors that can be controlled by TT RGB Plus ecosystem and sync with motherboards from Asus, Gigabyte, MSI and as rock that have a 5V addressable RGB header. Pacific A1 DDR4 RAM water block light up and cool down your memory modules easily!

p/N: cl-w239-ca00sw-a
dimension: 53.8 x 37 x 133.8 mm
1 x memory water block
4 x memory heat sink modules
1 x controller
Compatibility: DDR3, DDR4 (CPU socket)

With the new D-RAM coolers all desired memory chips can be cooled. This cooling block is screwed onto the optional cooling modules or existing heatspreader with a hole spacing of 110mm (like the Corsair Dominator). Due to its black nickel ground and black or transparent cover with lighting capabilities is the RAM cooler adaptable for each individual system . It is (availaible in/distinguished by) three different sizes: 2, 4 or 6 RAM modules which can be cooled parallel. Due to its special technology, the RAM cooler can be used in both, high-flow systems as well as in lower flow systems, at the optimal level. Technical Details: Material: Copper (black nickel) Colour: plexi (transparent) Connection thread: 2x 1/4″ Dimensions (LxWxH): 128 x 45,2 x 11,1mm RAM modules: 1 – 4 Scope of delivery: 1x D-RAM cooler X4 Universal Download 3D-file (.stp)

The EK-Vector Strix RTX 2080 Ti RGB water block is specially designed for the ROG Strix version of NVIDIA® GeForce® RTX 2080 Ti graphics cards.

The water block covers the entire PCB length, and directly cools the GPU, VRAM and the VRM. The redesigned cooling engine has a larger footprint compared to the previous generation for better cooling performance

The EK® Vector Series water blocks use an Open Split-Flow cooling engine design. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used with reversed flow. 

The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. Sealing is ensured by high-quality EPDM O-rings.

The block is equipped with 4 12V RGB LED strips which are compatible with the motherboard 4-pin 12V RGB LED header. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

Both the NVIDIA® and ROG NVLink™ are compatible with this water block. 

ENCLOSED:

• EK-Vector Strix series high-performance water block
• Mounting mechanism with screw-in brass standoffs
• Necessary mounting screws, nuts, and washers
• 2x Nickel plated brass plug G1/4”
• 6mm Allen key
• Thermal pads
• Thermal grease EK-TIM Ectotherm (1g)

PLEASE NOTE:

ROG Strix RTX 2080Ti factory backplate is not compatible with this water block
Fittings are just for showcase and are not included
Should not be installed with any aluminum EKWB Fluid Gaming parts

Model: 3831109814123

EK-FC1080 GTX Ti FTW3 RGB is a high-performance full-cover water block for EVGA GeForce GTX 1080 Ti FTW3 based graphics cards, based on NVIDIA Pascal architecture (GP102). The water block comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti FTW3 RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EKWB recommends the purchase of aesthetic retention backplate which improves the looks of your graphics cards and also provides some passive cooling to the circuit board VRM section. The EK-FC1080 GTX Ti FTW3 RGB water block is compatible with EK-FC1080 GTX Ti FTW3 Backplates and the factory EVGA backplate as well.

Model: 3830046996466

EK-RAM Monarch Module is a heatsink adapter which allows virtually any (DDR-)SDRAM memory module (of any generation) to be liquid cooled in conjunction with EK-RAM Monarch series water blocks.

Each heatsink consists of two separate plates while the DIMM memory module is sandwitched in between. Heat transfer between the memory module and aluminium heatsink adapter is ensured by the use of enclosed thermal pad. Between the EK-RAM Monarch Module Adapter and EK-RAM Monarch series water block we recommend the use of electrically non-conductive thermal grease, i.e. EK-TIM Ectotherm.

This product is ready to be used only with double-sided (single or dual ranked as per JEDEC) DIMM memory modules. In case single-sided DIMM module is used one needs to use 1.5mm thick thermal pad where no memory chips are used (not enclosed). Factory installed heatsink must be removed from each memory module prior to installation (if present).

This set contains two (2) EK-RAM Monarch Module Adapter heatsinks. Each of these items are made of CNC machined high quality aluminium and feature nickel finish.

Enclosed:
– EK-RAM Monarch Module Adapter (2 pcs)
– thermal pads
– mounting screws
– allen key 2mm

Made in Slovenia – EU!

Model: 3831109857472

Conclusion

By our suggestions above, we hope that you can found ram water cooling block for you.Please don’t forget to share your experience by comment in this post. Thank you!