The 10 Best Ram Liquid Cooling Block

Pacific A1 DDR4 RAM water block is a Ram water block that comes with four sets of RAM heat sinks to provide two-way heat dissipations for RAM. The copper-based water block allows liquid cooling and the aluminum heat sinks provides heat sinks convection for the Ram. The water block is built with 12 high lumens addressable LEDs of 16.8M colors that can be controlled by TT RGB Plus ecosystem and sync with motherboards from Asus, Gigabyte, MSI and as rock that have a 5V addressable RGB header. Pacific A1 DDR4 RAM water block light up and cool down your memory modules easily!

p/N: cl-w239-ca00sw-a
dimension: 53.8 x 37 x 133.8 mm
1 x memory water block
4 x memory heat sink modules
1 x controller
Compatibility: DDR3, DDR4 (CPU socket)

Bitspower Universal RAM Module Liquid Cooling Block – 4-DIMMs is a RAM water block designed as a universal RAM Block. Standard G1/4 threaded fitting ports are available to match any system design. Includes integrated RGB lighting.

Model: BP-RAMS44-RGB

High performance waterblock with RGB lighting, for DDR memory sticks. This product requires XSPC Universal Side Plate Set to support DDR3, VLP DDR3 and DDR4. (VLP DDR4 not supported). Features High performance copper base 127x40x3mm, Acrylic layer with chromed metal frame, Low flow restriction, G1/4? threads, and supports 2-4 sticks of DDR (XSPC replacement side plates required). Supplied with thermal pads, RGB controller and two RGB LEDs.

Model: 5060175589200

The EK-FC Radeon VII water block with nickel plated cooling plate and acetal top directly cools the GPU, memory and VRM as liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance.

The EK Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speeds and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios.

The base of the block is made of nickel-plated electrolytic copper while the top is made of high-quality acrylic. Sealing is ensured by high-quality EPDM O-Rings. The front corner piece is lit up with LED strip.

This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

G1/4″ threaded fittings can be used on both sides of the FC terminal.

Enclosed:
– EK-FC Radeon VII series water block
– Mounting mechanism with screw-in brass standoffs
– Necessary mounting screws, nuts, and washers
– 2x EK plug G1/4”
– 6mm Allen key
– Thermal pads
– Thermal grease EK-TIM Ectotherm (1g)

PLEASE NOTE:

Fittings are just for show and are not included!
This product should NOT be installed with any aluminum Fluid Gaming parts!
Radeon VII stock backplates are compatible with EK-Vector Radeon VII water blocks only if installed with the stock backplate screws.

Model: 3831109816165

Thermaltake Pacific DIY LCS Intel/AMD W4 RGB CPU Water Block AM4 Ready CL-W139-CU00SW-A

The all-new Pacific W4 RGB CPU Water Block features a RGB LED, 0.15mm internal fin construction, a copper base with anti-corrosive nickel plating and high-quality PMMA cover, and a universal mounting mechanism that offers error-free as well as no-tools installation. Fits with most G1/4 fittings, the Pacific W4 RGB provides the ultimate in cooling performance, and delivers extreme compatibility for custom PC builders.

Key Features:

• Gorgeous RGB LED with Lighting Controller
• Anti-Corrosion Design with Mirror-Finish CU Base
• Optimized 0.15mm Micro-Channel Fin Internal Structure
• 4-Pin Molex
• G 1/4” Thread Ports

Specification:

• Compatibility CPU Socket:

                 *Intel LGA: 2066/2011-3/2011/1151/1150/1155/1156/1366/775

                 *AMD: AM4/FM2/FM1/AM3+/AM3/AM2+/AM2

• 93.4mm (L) x 93.4mm (W) x 22mm (H)
• Copper + PMMA
• G ¼”
• 670 g

 Package Content:

• Pacific W4 CPU Waterblock
• Universal Mounting Brackets & Hardware (Intel/AMD)
• (1) Thermal Paste
• User Guide

 Support 
Please visit our website or search “Thermaltake Support” for any assistance.

EK-RAM Monarch X4 is unique, extremely high flow water block designed to efficiently cool the Corsair® Dominator® and Corsair® Dominator® GT memory modules by replacing factory heat sink fins.

This item can also cool any type & brand of computer DDR(-SDRAM) memory (of any generation) when combined with EK-RAM Monarch Module – Black (2pcs).

This water block is able to simultaneously cool up to four DIMM modules at once. It is recommended for use on AMD AM2/3(+) & Intel LGA-115x/2011 motherboards.

Top is made of quality Acrylic while the base is made of nickel plated electrolytic copper.

Enclosed:
– EK-RAM Monarch X4 series waterblock
– Installation Manual
– Allen key 2.35mm

Disclaimer: Corsair® and Dominator® are trademarks of Corsair Memory, Inc., which is not affiliated with, endorsing, connected to or a sponsor of this website or any of our affiliate sites.

Model: 3830046992345

The EK-Vector FTW3 RTX 2080 Ti RGB high-performance water block is specially designed for EVGA FTW version of NVIDIA® GeForce® RTX 2080 Ti graphics cards. The water block features a unique aesthetic cover over the block Terminal which is designed to showcase the graphics card model via LEDs, visible from the side.

The water block directly cools the GPU, VRAM and the VRM, and uses an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with pumps running at slower speeds. The jet plate and fin structure has been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed flow.

The base of the block is CNC machined out of nickel-plated copper while the top is CNC machined out of acrylic. Sealing is ensured by EPDM O-rings.

It features four integrated LED sources, two located in the terminal cover and one LED strip on each end of the water block which is compatible with the motherboard 4-pin 12V RGB LED header. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

G1/4″” threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to our offer of Scalar GPU Terminals.

Both the NVIDIA® and EVGA NVLink™ are compatible with this water block.

Enclosed:

– EK-Vector FTW3 series high-performance water block
– Necessary mounting hardware
– 2x Nickel plated brass plug G1/4”
– 6mm Allen key
– Thermal pads
– Thermal grease

PLEASE NOTE:
EVGA FTW3® RTX 2080Ti factory backplate is not compatible with this water block. This product should NOT be installed with any aluminum Fluid Gaming parts!

Model: 3831109816783

The EK-Vector RTX RE RGB – Nickel + Plexi water block is specially designed for multiple reference NVIDIA GeForce RTX Turing based graphics cards. It also offers extended compatibility fitting more reference design based cards.

It directly cools the GPU, VRAM and the VRM, and features a redesigned cooling engine with a larger footprint compared to the previous generation.

The EK-Vector RTX RE Series use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker or slower speed pumps. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed flow.

The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of acrylic material. Sealing is ensured by EPDM O-Rings. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers

G1/4″ threaded fittings can be used on both sides of the terminal. For multiple GPU connectivity, please refer to our offer of EK-Scalar GPU Terminals. 

The NVIDIA NVLink is compatible with this water block.

Enclosed:

– EK-Vector RTX RE series high-performance water block
– Mounting mechanism with screw-in brass standoffs
– Necessary mounting hardware
– 2x Nickel plated brass plugs
– Thermal pads / grease EK-TIM Ectotherm (1g)

PLEASE NOTE:

• NVIDIA RTX 2080 Founders edition factory backplate is not compatible with this block
• The EK-Vector GPU water block terminal cover is not compatible with FC Terminal X and FC Terminal (Legacy) multi GPU connectivity bridges
• This product should NOT be installed with any aluminum Fluid Gaming parts

Model: 3831109815885

Conclusion

By our suggestions above, we hope that you can found ram liquid cooling block for you.Please don’t forget to share your experience by comment in this post. Thank you!