gadfurniture 
Nowadays, there are so many products of plastic hot water tank in the market and you are wondering to choose a best one. You have searched for plastic hot water tank in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings plastic hot water tank which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
InSinkErator Invite H-HOT100 Push Button Instant Hot Water Dispenser System with Stainless Steel Tank, Chrome
- For Rough usage valve. Delivers 60 cups of near boiling water per hour
- Geneva lever handle matching handle cap to replace the standard white cap
- Manufactured in United States of America
- Required Hole Diameter-1-1/4 inch to 1-1/2 inch (standard). Thermostat-Snap-action, adjustable from 160˚F to 210˚F (factory pre-set at 200˚F)
- Unit not for commercial and industrial use
The InSinkErator HOT100 Instant Hot Water Dispenser System is the newest and most affordable addition to the Invite series. So simple and useful, once you use it, you will love it instantly.
With near-boiling water at your fingertips, you can enjoy the convenience of instantly preparing gourmet coffee and hot tea, steaming vegetables in a flash, warming baby bottles in seconds, removing candle wax from candle holders with ease, cleaning without the use of harsh chemicals, removing stubborn lids and labels, and so much more.
The HOT100 instant hot water dispenser features a modern Chrome finish hot water faucet with easy push-button and 750-watt, 2/3-gallon stainless steel tank that delivers near-boiling water. An easy-adjustable thermostat allows you to control the temperature from 160 degrees F to 210 degrees F.
The HOT100 system is designed for do-it-yourself installation, with no special plumbing required. Convenient tool-free tank connections and dry-start protection provide easy set-up and peace of mind. The system requires an unswitched AC power outlet, dedicated control valve with compression fitting, and T-fitting. The faucet requires a standard 1-1/4-inch to 1-1/2-inch diameter hole for installation with a maximum counter thickness of 2 inches.
InSinkErator covers the HOT100 instant hot water dispensers with an exclusive 1-Year We Come to You In-Home Full Service Limited Warranty. This warranty includes free house calls (including parts and labor) for the entire warranty period.
Flextrol FTT5 Thermal Expansion Tanks-for Hot Water Heaters, Carbon Shell, Stainless Steel 3/4 Inch MIP Connection, Butyl Diaphragm, 150 PSI, 210 Degrees Fahrenheit, Almond Color, 2.1 Gallons
- Thermal Expansion Tanks Are Used to Prevent Plumbing System And/or Water Heater Damage and Unnecessary Relief Valve Discharge Caused by Excessive Pressure from Thermal Expansion
- Prevent Dangerous Pressure Build Up & Protect Household Appliances and Fixtures
- External Baked Epoxy-Polyester Coating Provides a Durable Appliance Finish
- Exclusive Polypropylene Liner Eliminates Internal Corrosion
- Protect Safety Valves from Failing
- Save Energy and Water
- MIG Welding Eliminates Interior Rough Spots and Sharp Edges
- High Grade Steel Construction
- Made in Italy
- All Tanks Are NSF61 Certified
What is Thermal Expansion?
When heated, water expands. Under normal circumstances, a 40 Gallons hot water heater creates roughly an additional half gallon of water when heated (with no demand). In the past this expanded water would flow back into the public water supply. However, in many countries, where applicable by code, a backflow preventer is required, creating a closed system and a new problem as this extra half gallon of water is not compressible. When an expansion tank is installed the excess water enters the pre-pressurized tank. As the temperature and pressure reaches its maximum, the diaphragm flexes against an air cushion (air is compressible) to allow for increased water expansion. When the system is opened again or the water cools, the water leaves the tank and returns to the system.
Potential Problems Without an Expansion Tank
- Premature failure of the water heater may void the warranty of the water heater
- Dangerous high pressure
- leaky fittings and valves
- collapsed center flues
- flames out of combustion chamber
- Unnecessary Relief Valve Discharge
Installation Options for Thermal Expansion Tanks
- Install on the cold water side after the pressure reducing valve and between the backflow preventer and the water heater
- Do not install in an area where leakage could cause property damage
- The tank can be installed either vertically or horizontally. However, if the tank is to be installed horizontally, then it must be fully supported independent from the piping. Failure to do so will void the warranty.
Technical Features
- All tanks are NSF61 Certified
- MIG welding eliminates interior rough spots and sharp edges
- Each tank is factory leak tested
- 150 PSI Max pressure rating
- External baked epoxy-polyester coating provides a durable appliance finish
- Exclusive polypropylene liner eliminates internal corrosion
- Protected precharge valve eliminates potential leak path
Material Description
- Shell: Carbon Steel
- Connection: Stainless steel
- Diaphragm: Butyl
- Color: Almond
Operating Conditions
- Max. Operating Pressure: 150 PSI
- Operating Temperature: 210 Degrees Fahrenheit
- Factory Precharge: 40 PSI
- Warranty: 1 Year
Specifications
- Model Number: FTT5
- Tank Size: 2.1 Gallons
- Tank Weight: 6 Pounds
- Connection Size (National Pipe Thread): 3/4" Male Iron Pipe (MIP)
- Dimensions (LxWxH): 13" x 9" x 9"
- Acceptance Volume: 1.4 Gallons
- UPC Code: 80459513077
Similar items with 4 stars and above
InSinkErator H-CONTOUR-SS Invite Contour Instant Hot Water Dispenser System with Stainless Steel Tank, Chrome
- Hot water dispenser provides 60 cups / hour of near boiling water
- Includes 2/3-gallon stainless steel tank .The thermostat for safety reasons has been factory pre-set at 200 degree fahrenheit
- Features easy to adjust temperature control
- Tool-free tank connections and dry start protection to ease installation
- Includes 3-year We Come to You In-Home Service Warranty
H-CONTOUR-SS Features: -Includes chrome finish instant hot water dispenser and 2/3 gallon stainless steel hot water tank. -Delivers 60 cups per hour of water at 200° F. -Tool-free tank connections and dry-start protection to ease installation. Product Type: -Instant hot water dispensers. Country of Manufacture: -United States. Dimensions: Overall Faucet Height: -5.8″. Overall Product Weight: -7.4 lbs. Installation Hole Diameter: -1.25″. Overall Faucet Depth: -6″. Overall Faucet Width: -1.5″.
Waste King AH-1300-C Quick and Hot Instant Hot Water Tank
Product description
AH-780-UL Features: -Water dispenser.-Hot water dispenser for instant coffee, soup, oatmeal, hot chocolate and tea.-Instantly delivers up to 60 cups per hour of steaming hot water.-5/8 gallon stainless steel tank with removable drain plug built to last.-Patented displacement system increases service life by helping to prevent mineral buildup.-Fingertip adjustable thermostat – 140° to 190°.-Heater protection control with patented self-resetting thermal fuse to prevent dry start.-Tank is not under pressure; self-contained expansion chamber prevents dripping and leaks.-Uses less electricity than a 40-watt light bulb, costing less than $2.00 per month to operate.-Compatible with Cool Water and Clear Water both sold separately.-Use with "Open Vent" faucets available in single (hot only) or dual (hot & cold) (sold separately). Specifications: -780 watt heating element allows for faster recovery time. Dimensions: -Overall Dimensions: 11.20" H x 8.10"W x 6.80" D. Warranty: -Package Contents: hot water dispenser, tank mounting bracket, quick-connect fitting, power cord, manual, warranty.
From the Manufacturer
Waste King’s Quick and Hot kitchen Hot Water Tank provide you with 190-degree hot water at your fingertips – anytime! The Quick and Hot is compact, energy efficient, safe, easy to install and has a 60 cup per hour capacity. Faucet is not included. A great addition to any kitchen!
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 7-Gallon (ES8)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
- CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
- INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
- RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
- IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
120V – requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2″ of foam insulation. Glass lined tank for longer life. 6 year warranty on heater and 1 year warranty on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90.1. See Info Page for technical and installation specifications.
Frost King SP57/11C All All Season Water Heater Insulation Blanket, 3” Thick x 48” x 75”, R10
Product Description
Thermwell SP57/11C Water Heater Blanket. Fits up to 60-gallon water heater. 3-Inch tall by 48-inch wide by 75-inch tall
From the Manufacturer
The Frost King SP57/11C Water heater Insultion Blanket is fibergalss and foil on both sides for supreme insulation and fits most gas, oil or electric water heaters. Includes foiltape for easy installation. The reflective value is rated at 10.
Thermoflow UT10 2.6-Gallons Electric Mini-Tank Water Heater, 1.5kW at 120 Volts
- ➤ 2.6 GALLON CAPACITY – 2.6 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it.Stainless steel tank and heating element designed for efficiency, durability and easy replacement.
- ➤ THERMOSTOP FUNCTION – Low stand-by loss power consumption. The Thermoflow UT10 with Advanced Thermostop Technology of Germany, when the water heater reaches a high or low set temperature,it’ll stop heating or reheating automatically.
- ➤ EPS FOAMING TECHNOLOGY – Heating water quickly,fast recovery rate eliminates long waits for hot water at your sink.
- ➤ SAFETY – Active protection circuit for safe installation. If the water heater does not come out with hot water when it’s already connect to the electric supply, then the water heater will cut off the electric supply automatically to prevent the water heater from overheat.
- ➤ NOTES – Please verify that this model is the right size for your hot water needs and electrical requirements before purchase &
- installation. Dimensions: 18H x 12.2W x 11D inches
- Weight: 14 lbs
- Water connections :1/2 inch NPT, Electrical requirements: 1.5 kW, 120 volts. Operating pressure : 150PSI.Nominal current: 13A .
Corro-Protec CP-R Water Heater Powered Titanium Anode Rod (40-80 Gallon Tank) – Eliminate Odor (Sulfur/rotten egg smell), Corrosion and Reduce Limescale
- Say Goodbye to Odors – Eliminate your water heat odor problem by removing the rotten egg smell caused by hydrogen sulfide with our advanced powered anode rod.
- Permanent Corrosion Protection – Designed to replace your 40-80-gallon water heater’s hex head anode rod, it can help defend against any level of water hardness.
- Energy Efficient Design – By reducing mineral accumulation on the tank it can help improve the water quality while reducing stress on the tank to reduce energy costs.
- Quick and Easy Installation – We’ve included an easy-to-follow paper and step-by-step online PDF instructions to make installing your anode rod much easier.
- North American Quality – Manufactured right here in North America, our hot water heater anode rod not only extends the life of your tank but is backed by a 20-year warranty.
RV Water Heater Anode Rod – Magnesium Anode Rod Suburban Water Heaters Suburban & Morflo – 9.25”Long & 3/4” Thread – Long Lasting Tank Corrosion Protection – 1pc
- ✓ LONG LASTING QUALITY: Made using high-quality magnesium that is specifically designed to provide long-lasting use and collect contaminants from water hearts, this suburban heater anode rod lasts longer and provides better performance when compared to aluminum heater anode rods ensuring your water heater doesn’t break down anytime soon.
- ✓ PROLONG WATER HEATER LIFE: The anode rod is a crucial part of every water heating system that helps prolong the lifespan of the Water Heater and enhances performance to provide reliable long-lasting use. Our suburban water heaters magnesium anode rod attracts all the contaminants in the water towards itself using electrolysis ensuring your RV water heater provides lasting use.
- ✓ PROTECT HEATERS AGAINST CORROSION: This RV and outdoor water heater anode rod acts as a powerful filter for water being stored in the heater. To protect the metal casing of the water heaters from being worn down by corrosion, our water filter rods enhance the longevity of your water heater. You should gradually check the anode rod to see whether it needs to be replaced.
- ✓ FOR SUBURBAN WATER HEATERS: This water heater tank corrosion prevention rod is 9.25’’ Long and 3/4’’ NPT Thread making it compatible with most RV Suburban and Mor-Flo 6 Gallon Water Heaters. It’s easy to install and replace and provides reliable use. We’ve included a replacement anode rod as well to make it easier for you to switch it when the time comes.
- ✓ 100% CUSTOMER SATISFACTION: To us, customer satisfaction always has and always will be our top priority. Each of our RV Anode Rods are made with our customers in mind which is why we go the extra mile to acquire the finest materials on the market. We’re so confident that you’ll love our Magnesium Anode Rods that we offer a 100% Customer Satisfaction Warranty so that you know you’re making a Risk Free Investment.
House Mods HMP010 Brass 3/4" MIP Water Heater Replacement Drain valve(Full Port, Ball Valve, 2 inch Shank)
- Lead Free Compliant Brass Body, 304 Stainless Steel Ball Valve, 2 inch shank, Fits Water Heater Drain Port up to 1-1/2″ Deep
- FULL PORT BALL VALVE: 19 mm Flow Opening, Fast Drain, Clean out larger debris and easy to unclog
- ENLARGED OCTAGON NUT: Easy to install with a pipe wrench, do not over-tighten.
- HEAVY AND HEAVY DUTY: Net Wight: 0.95 lb.
- BIG HANDLE: Make sure you have enough room to install. NOT for use under freezing temperature.
Contain less than 0.25% lead. Lead Free Compliant. California prop 65 warning: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Conclusion
By our suggestions above, we hope that you can found plastic hot water tank for you.Please don’t forget to share your experience by comment in this post. Thank you!
