The 10 Best Pc Cooling Fluid Clear

As with all of PrimoChill’s high performance cooling system fluids and additives, Liquid Utopia is safe, non toxic, and biodegradable. Liquid Utopia is the only single use additive available in today’s market that provides a broad spectrum of coverage and has the ability to be dyed to your color choice by adding a PrimoChill Intensifier(sold separately). No matter which of the twelve colors you choose, PrimoChill’s Liquid Utopia makes life easy for you, and short for Algae and Corrosion.

********DO NOT MIX WITH THE PRE MIXED PC ICE OR PC PURE********
Warnings/Cautions: * Liquid Utopia is made with earth friendly ingredients and carries a broad spectrum of anti-microbial agents. If you notice white sediment in your loop, it is most likely Liquid Utopia has been hard at work! White sediment may be present for some time, depending on the amount of existing contaminants. Do not mix with any pre-mixed coolants as it will over saturate the inhibitors, this includes Silver Coils as they act as a antimicrobial component.
Tyler Direct is not responsible for any hardware damage. Use at your own risk.

Opaque True is a breakthrough in showcase coolant. The solid color will set the edge on your next build and provide stunning pictures of beauty to be appreciated by all. Opaque is classified as a showcase style coolant but performance is comparable to any of its transparent counterparts.

True Opaque may lose its original color when added to your loop within the first 24-48 hours. This is a common, well known occurrence. If this happens, immediately drain and flush with DI or Distilled water. Once the system has been drained and cleaned, refill your system with True Opaque fluid once again. True Opaque will over time help neutralize your cooling loop, which will then stabilize the color.

As with all Opaque fluids, buildup of particles in the micro channels of water blocks will occur over time. This buildup can cause the fluid in your system to flow slower and possibly stop flow all together. System pressure also plays a role in how well True Opaque performs. The combination of high pressure loops and microchannel water blocks will accelerate the breakdown of True Opaque coolant. If you notice ANY collection or separation of True Opaque, drain and rinse your system IMMEDIATELY. Running Opaque coolant after it has separated can cause unknown issues and may require the user to open, and clean each individual component in the system.
WARNING: Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.

Opaque True? Instructions (Full instructions included with product)
1. Finish Opaque Sys Prep Instructions. (Requires 48 Hour minimum flush time for new builds and existing system refills).
2. Mix 8oz Opaque True w/ 1 gallon distilled water.
3. Shake casually to incorporate the pre-mix w/ the water.
4. Fill your system w/ fluid using your preferred priming method.

Koolance 702 series coolant is used by many industries requiring a high performance, low-toxicity, reliable coolant with corrosion and biological inhibitors. A high quality coolant is extremely important for addressing dissimilar metals and biologic growth (bacterial and algae) long-term. Koolance liquids will not clog components and can typically be used for 2-3 years before replacement is recommended. (Coolant shelf life is 3 years.)

This container includes 700ml (24 fl oz) of prediluted coolant and can function as a squirt bottle for convenient reservoir filling. It’s recommended to replace the coolant at least every 2-3 years, or immediately if there is any change in color or clarity.

The freezing point is -15°C (5°F). This coolant has been tested with the following materials:

• Metals: copper, brass, aluminum, stainless steel, nickel, steel, gold, lead
• Plastics: ABS, PA66, PBT, PE, PEI, PES, PETG, PMMA, POM, PP, PPE, PPO, PPS, PTFE, PU, PVC
• Rubber: EPDM

NOTE: Not recommended for polycarbonate plastics or other PC-based plastics.

Additional Specifications

• Color: Yellow
• Volume: 700mL (23.67 fl oz)
• Freezing Point: -15°C (5ºF)
• Electrical Conductivity (µS/cm): 2500
• UV Reactive: Yellow
• Specific Gravity @20°C: 1.03
• Viscosity @20°C (cP): 2.3

PrimoChill Intensifier coolant dyes have been carefully reformulated into smaller batches to ensure the highest quality and consistency from batch to batch. Each batch is “Intensely” inspected and tested for consistent color, signs of contamination that may have occurred during the manufacturing process, effects of temperature extremes, and any sign of degradation. This vigorous testing is performed in a real world environment with the latest water cooling hardware. Over the last decade, PrimoChill has strived to provide the water-cooing community quality products that inspire our customers. Intensifier Coolant Dyes are the next generation of cool. Get Creative!

PrimoChill Intensifier coolant dyes have been carefully reformulated into smaller batches to ensure the highest quality and consistency from batch to batch. Each batch is “Intensely” inspected and tested for consistent color, signs of contamination that may have occurred during the manufacturing process, effects of temperature extremes, and any sign of degradation. This vigorous testing is performed in a real world environment with the latest water cooling hardware. Over the last decade, PrimoChill has strived to provide the water-cooing community quality products that inspire our customers. Intensifier Coolant Dyes are the next generation of cool. Get Creative!

Thermaltake Pacific C360 DDC soft tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six Pacific 1/2” Id x 3/4” Od compressions, two meters of V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) OD transparent tube, an a RGB LED controller, and other accessories. dimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: pump & reservoir: 86. 54 (L) x 62 (W) x 140. 1 (H) mm copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific 1/2” Id x 3/4” Od compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1 tube- V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) transparent tube x2 meters accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1

PrimoChill takes pride in providing solutions, and PC Ice is the solution to your water cooling fluid dilemma. This revolutionary cooling formulation takes a giant step in the world of water cooling-leaving the competition in a puddle of their own sweat. PC Ice is intended for the casual user looking to get into water cooling without worrying about their system springing a detrimental leak*. Its clean, low viscosity and low chemical makeup creates an excellent coolant for your PC. If you are looking for an affordable and efficient solution as well as a peace of mind, the ONLY solution is PC Ice. The name hasn’t changed, the performance is still top notch, the cost is still outstanding, leaving PC Ice ounce for ounce STILL your best choice.
WARNING: Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.

USAGE NOTES: *Low-Conductivity: As with all Non-Conductive fluids, PC ICE can become conductive if it comes in contact with excessive dust or other fluids that may be conductive. The Non-Conductive aspect of PC Ice is used as a safety measure only. It is always a good idea to keep your system clean and free of dust, especially in a water cooled system. PrimoChill is not responsible for any hardware damage. Use at your own risk.

**DO NOT MIX: PC Ice includes an Anti-Microbial agent, we do not recommend mixing any other anti-algae or anti-microbial agents with the PC Ice fluid, this includes Liquid Utopia. Adding additional agents will cause a chemical reaction with the agent currently in the fluid. It is not dangerous, it will just cause the fluid not to operate at maximum levels and may cause unwanted build up. Packaging Notes: Amazon requires that all bottles have taped lids for shipping.

PrimoChill takes pride in providing solutions, and PC Ice is the solution to your water cooling fluid dilemma. This revolutionary cooling formulation takes a giant step in the world of water cooling-leaving the competition in a puddle of their own sweat. PC Ice is intended for the casual user looking to get into water cooling without worrying about their system springing a detrimental leak*. Its clean, low viscosity and low chemical makeup creates an excellent coolant for your PC. If you are looking for an affordable and efficient solution as well as a peace of mind, the ONLY solution is PC Ice. The name hasn’t changed, the performance is still top notch, the cost is still outstanding, leaving PC Ice ounce for ounce STILL your best choice.
WARNING: Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.

USAGE NOTES: *Low-Conductivity: As with all Non-Conductive fluids, PC ICE can become conductive if it comes in contact with excessive dust or other fluids that may be conductive. The Non-Conductive aspect of PC Ice is used as a safety measure only. It is always a good idea to keep your system clean and free of dust, especially in a water cooled system. PrimoChill is not responsible for any hardware damage. Use at your own risk.

**DO NOT MIX: PC Ice includes an Anti-Microbial agent, we do not recommend mixing any other anti-algae or anti-microbial agents with the PC Ice fluid, this includes Liquid Utopia. Adding additional agents will cause a chemical reaction with the agent currently in the fluid. It is not dangerous, it will just cause the fluid not to operate at maximum levels and may cause unwanted build up. Packaging Notes: Amazon requires that all bottles have taped lids for shipping.

The X1 is based on a proprietary blend of refined vegetable extracts that are fully biodegradable and have a very low order of oral toxicity. Mayhems X1 is recommended for use in systems where an ‘environmentally friendly’ product is preferred. It also contains non-toxic (GRAS) multi metal inhibitors formulated to protect water cooling equipment and associated systems against corrosion, scale and biological fouling, thus prolonging equipment life and thermal efficiency.

• Can be used with all of Mayhems Dyes to make your own colours
• Blended with non-toxic corrosion & scale inhibitors for protection of Copper, Brass, Steel, Nickel and Aluminium. Proven to ASTM D3306 and BS6580 standards
• Very low oral toxicity, less than propylene glycol
• Contains all the biocides you will need
• -15c freezing point (dependant on mix ratio)
• Generally Recognised as Safe (GRAS) by the US Food & Drug Administration as a food additive
• Mobilizes to prevent scale or sludge filming
• Boiling Point: up to 100 C (pressure dependent)
• 85% Bio-degradable within 30 Days
• Bitter taste additives to prevent consumption
• Can be stored for up to 3 years (in a cool dry environment)

The system must be clean and have no chemicals of any kind left in the loop. There must be an absence of bleach, biocide and anti-corrosive inhibitors. We recommend you flush your system with Mayhems Blitz kit before use. Mayhems X1 has biocides and inhibitors included within the mixture.

Due to X1 being a reformulated Vegetable extract the colour of the coolant can vary from Clear to Straw Yellow in colour. When diluted this is not noticeable and has no effect on the performance of the coolant.

Does not contain ethylene glycol.

Model: MX1C1LTR

With Alphacool Eiswasser, water cooling pioneer Alphacool is checking off every modder and enthusiast’s wish list: brilliant colours, cool effects in plexi coolers, tubing and reservoirs, as well as a long lifespan and material compatibility. The Alphacool Eiswasser Crystal Series has been tested in every possible application both in Alphacool’s lab and by external testers and modders, and was proven to be high-quality and long-lasting. If you’re looking to add some illumination to your PC, the Alphacool Eiswasser Crystal UV is for you. It has excellent UV-reactivity with UV-LEDs or cathodes. Alphacool Eiswasser gives your water cooling system an extra visual highlight with great cooling performance and a long lifespan. Due to the intensity of the colours, clothing and other materials that come into contact with the colour may be stained. Please take care not to spill during use.

Model: 18548

Conclusion

By our suggestions above, we hope that you can found pc cooling fluid clear for you.Please don’t forget to share your experience by comment in this post. Thank you!