Which Is The Best Pc Cooling Biocide

As with all of PrimoChill’s high performance cooling system fluids and additives, Liquid Utopia is safe, non toxic, and biodegradable. Liquid Utopia is the only single use additive available in today’s market that provides a broad spectrum of coverage and has the ability to be dyed to your color choice by adding a PrimoChill Intensifier(sold separately). No matter which of the twelve colors you choose, PrimoChill’s Liquid Utopia makes life easy for you, and short for Algae and Corrosion.

********DO NOT MIX WITH THE PRE MIXED PC ICE OR PC PURE********
Warnings/Cautions: * Liquid Utopia is made with earth friendly ingredients and carries a broad spectrum of anti-microbial agents. If you notice white sediment in your loop, it is most likely Liquid Utopia has been hard at work! White sediment may be present for some time, depending on the amount of existing contaminants. Do not mix with any pre-mixed coolants as it will over saturate the inhibitors, this includes Silver Coils as they act as a antimicrobial component.
Tyler Direct is not responsible for any hardware damage. Use at your own risk.

EC6 Protect – Biocide is a highly effective slow release, long life biocide. Simply add to de-ionised water, purified water, or coolant for years of protection against bacterial growth and algae. EC6 Protect can be used in new system to protect against biological growth, or added to an existing system to neutralise bacteria an algae.

• Highly Effective Biocide
• Slow Release and Long Life
• Non-corrosive
• Low Odour
• Non-Foaming
• Low viscosity

Mix with water at a ratio of 6ml per litre. One bottle will treat 5 litres of water.

Do not mix in a higher than recommended ratio. EC6 Coolants already contain EC6 Protect Biocide.

Model: 5060175589613

Primochill Sys Prep was created to address the immense customer requests for a clean and well maintained cooling system. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep.
Specifications

Compatibility: Sysprep is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe!
Instructions
1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of SysPrep into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
3.Add mix to cooling loop.
4.Fill loop with treated water and be sure to remove as many air bubbles as possible.
5.Start loop pump and begin circulating the treated water.
6.Run treated water for at least 12 to 24 hours to ensure loop is properly flushed and treated.  While using for longer periods of time doesn’t have negative effects, Sysprep is not an effective final coolant and should be replaced with coolant before any extended use of computer.
7.Drain System. Inspect drained water for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
8.Fill loop with your choice of coolant and begin water-cooling.**

** Residual treated water left in your loop is not harmful. If you prefer to remove it, do a simple rinse of the loop with fresh DI or Distilled Water. This rinse will not affect the results of the Sys Prep just performed.

Warnings:Do not mix with any pre-mixed coolants as it will over saturate the inhibitors.
PrimoChill is not responsible for any hardware damage. Use at your own risk.

Once placed in the water the silver will require 7-10 days to become effective.

The CORSAIR Hydro Series H100i PRO is an all in one RGB liquid CPU cooler with a 240mm radiator built for low noise cooling performance and bold styling with an RGB LED pump head. Two included 120mm ML Series magnetic levitation PWM fans provide great airflow and static pressure, with a wide PWM speed control range between 400 RPM and 2, 400 RPM. Take control with CORSAIR iCue software and customize lighting, monitor temperatures and precisely adjust fan speeds, or stop cooling fans entirely with the H100i’s Zero RPM fan mode. Easy to install and compatible with most major CPU sockets, the H100i makes it easy to cool your system in silence and style.

Conclusion

By our suggestions above, we hope that you can found pc cooling biocide for you.Please don’t forget to share your experience by comment in this post. Thank you!