gadfurniture 
Nowadays, there are so many products of pacific m360 plus liquid cooling kit in the market and you are wondering to choose a best one. You have searched for pacific m360 plus liquid cooling kit in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pacific m360 plus liquid cooling kit which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Thermaltake Pacific C360 Ddc Res/Pump 5V Motherboard Sync Copper Radiator PETG Hard Tube Water Cooling Kit CL-W243-CU12SW-A
- Analog/digital lighting Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync
- All included the C360 hard tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop
- Slim copper radiator the C360 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis
- C pro fittings build like a Pro with a new take on compression fittings. Engineered with four Built in O rings to provide maximum leak prevention and a secured compression seal
- Exclusive components W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15 ddc pump/reservoir combo
- 2 years
Thermaltake Pacific C360 DDC hard tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six C-Pro G14 PETG 16mm OD compressions, eight v-Tobler PETG tubes, an a RGB LED controller, and other accessories. p/N: cl-w243-cu12sw-adimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific C-Pro G14 PETG 16mm OD compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1tube- V-Tobler PETG tube 16mm OD 500mm x 8accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1- silicone insert x1. Do not let the pump run dry, when there is no liquid entering the pump turn off your power immediately
Similar items with 4 stars and above
Cooler Master MasterLiquid LC240E RGB Close-Loop AIO CPU Liquid Cooler, 240mm Radiator, Dual Chamber RGB Pump, Dual MF120R RGB Fans w/ RGB Lighting Sync for AMD Ryzen/Intel 1151/2066
- Liquid Cooling System:The Cooler Master LC240E delivers efficient cooing with our dual pump 120 millimeter fans
- It keeps your system running effectively, even in the high load times
- Air flow: 66.7 CFM
- Noise level:31.5 decibels
- Dual Chamber: Our low profile dual chamber pump delivers sizable performance leaps over last gen technology
- 120 millimeter fans: Silent cooling at an efficient rate
- Sleeved tubing reinforced FEP tubbing TO keeps the tube kink free and the liquid flowing to your CPU
- Rgb Controller: allows you customize colors and light effects
- CPU Socket Support: Intel: LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD: AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1
The LC240E RGB incorporates Cooler Master’s Dual Chamber Pump, 120mm Fan, and RGB Controller to control the lighting effects. With its matt black styling, braided cabling and RGB lighting effects, the LC240E RGB is a Cooler Master original design and enables a colorful and great performing entry into liquid cooling. Reliability, performance and quiet operation are ensured by its unique Dual Chamber Pump and twin 120mm fan design. Whether you’re building new or just upgrading, it’s easy to install on the latest Intel or AMD systems and 240mm radiator fits many performance PC chassis.
Similar items with 4 stars and above
DEEPCOOL CAPTAIN 240EX RGB WHITE, AIO Liquid CPU Cooler, Sync RGB Waterblock and Strip with Cable Controller or Motherboard with 12V RGB 4-pin Header, 2×120mm PWM Fans, AM4 Compatible, 3-year Warranty
- RGB variable lighting system includes waterblock and one LED Strip that can be controlled by cable controller or motherboard with 12V 4-pin RGB header
- White version, 240mm radiator, two TF120 PWM fans, RGB waterblock, one strip
- Support AMD AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1 and Intel LGA20XX/LGA1366/LGA115X
- Upgraded anti-explosion rubber tube, anti-corrosion, crush resistance & thermostable material
- Updated tooling free installation solution, solid 100% metal material clip
Similar items with 4 stars and above
Cooler Master MasterLiquid ML240R Addressable RGB Close-Loop AIO CPU Liquid Cooler, 240 Radiator, Dual Chamber Pump, Dual MF120R Fans, Independently-Controlled ARGB LEDs for AMD Ryzen/Intel 1151
- 240 millimeter Radiator low: profile dual chamber addressable RGB pump with dual addressable RGB fans for push and pull air flow
- Air flow: 66.7 CFM
- Noise level:30.0 decibels
- Addressable RGB fans and pump: Color option can be controlled through Cooler Master software centimeter Plus
- Removable pump cap: never worry about installing the pump upside down
- Pop out the cap and place it
- Done
- Includes: Wired addressable RGB Controller for non RGB motherboards for customize colors
- Sleeved FEP Tubing’s: sleek black outer sleeves with FEP Tubing’s inside for durable lasting and flexibility
- Includes 1 to 3 addressable RGB Splitter cable for multiple ARGB fans
- Refer to the PDF attached below in technical Specification for user Manual
- Cpu socket support: Intel: LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD: AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1
The Master liquid all in one liquid CPU cooler is custom, inside and out. Our low profile dual chamber pump outperforms its single chamber predecessors in heat transfer. The Master Fan air Balance fans work with our characteristically sturdy build quality to keep this thing as quiet as a library. Addressable RGB LEDs are installed on both the pump and fans for full color customization that can be controlled through the provided controller or our exclusive cm Plus software. Kink free, factory sealed FEP tubing now comes sleeved for a premium look. Screw it in and experience the quiet muscle of liquid cooling without ever worrying about refills or maintenance. Enjoy the work of decades of thermal innovation.
Similar items with 4 stars and above
Thermaltake Pacific Riptide 360 Pro D5 Res/Pump PETG Hard Tube Water Cooling Starter Kit CL-W121-CA12RE-A
- Not ready for the deep end just yet? Wade in the shore lines with the Reef 240, which gives you all the basic necessities to get your feet wet and your CPU cool.
- RADIATOR: High-density fin design (FPI: 14), the 240mm radiator is optimized to accommodate high airflow and high air pressure with increased capacity.
- W2 CPU WATER BLOCK: The LED CPU water block is constructed with a copper base and LED Backlighting to provide exceptional heat transfer and cooling performance. Fits all modern CPU sockets.
- PR22-D5 w/ SILENT KIT RESERVOIR PUMP COMBO: The 300ml reservoir and D5 pump to provide the perfect combination for proper water cooling circulation and capacity.
- A COMPLETE KIT: Including (6) PETG Compression, (2) 90° Adapters and (1) Dual Compression 90° fittings, 2 Packs of 4 x 500mm PETG Hard Tubes
The Riptide 360 Pro takes you for a ride into common waters with a 360mm (3x120mm) radiator to offer users proper CPU cooling performance with limited cooling expansion. Ideal for dedicated CPU cooling performance, take on today’s CPU cooling demands and dive deeper into your gaming with unrivaled custom loop presentation.
Similar items with 4 stars and above
Koolance EX2-1055 Computer Liquid Cooling System, Rev1.3
- EX2-1055 is an ambient liquid cooling system designed with features for computer cooling.
- This model contains a triple x 120mm fan aluminum radiator, providing roughly 900W of cooling with a 25°
- C ambient delta.
- Just add tubing, fittings, coolant, and connect to your cold plate(s).
- Cooling capacity: 900W (3071BTU/hr) with 25°
- C liquid-ambient delta @ 4.5LPM.
- Radiator fan speed: automatic based on temperature, or 10 manual levels.
EX2-1055 is an ambient liquid cooling system designed with features for computer cooling. This model contains a triple x 120mm fan aluminum radiator, providing roughly 900W of cooling with a 25°C ambient delta. Just add tubing, fittings, coolant, and connect to your cold plate(s).
• Cooling capacity: 900W (3071BTU/hr) with 25°C liquid-ambient delta @ 4.5LPM
• Radiator fan speed: automatic based on temperature, or 10 manual levels
• Pump: 10 manual levels, up to 4.5LPM (1.2GPM)
• Adjust audio alarm based on 3 included temperature sensors
• Relay trigger can be configured as NO or NC and adjusted based on temperature
• Power input: 12VDC (via computer Molex plug), or 110/220VAC with separate adapter
• Reservoir capacity: 142mL (4.8 fl oz)
• G 1/4 BSPP threads on back for fittings
Additional Specifications
• Flow Rate: 4.5LPM (1.2GPM)
• Radiator: Aluminum, 3 x 120mm fans
• Display Type: LED
• Temperature Sensors: 10K Thermistors
• Power Source: 12 VDC (110/220 VAC with Separate Adapter)
• Noise (dBA): 34-46
• Max Temperature: 60°C (140°F)
• Max Pressure @ 25°C: 1.5kgf/cm2 (21.3psi)
• Cooling Capacity: 900W (3071BTU/hr) @ 25°C liquid-ambient (25°C dT)
• Max Power Consumption: 30W
• Fitting Thread: G 1/4 BSPP
EKWB EK-KIT Performance Series PC Watercooling Kit P360
- Universal CPU water block: EK-Supremacy EVO (incl. LED diode, mounting- & thermal material)
- Water pump-reservoir combo: EK-XRES 140 Revo D5 PWM (incl. pump)
- Radiator: EK-CoolStream PE 360 (Triple)
- Compression fittings: EK-ACF Fitting 10/13mm (3/8” – 1/2”) – G1/4 Nickel (6 pcs)
- Radiator fan: EK-Vardar F3-120 (1850rpm) (3pcs)
The EK-KIT P360 is the ultimate liquid cooling kit dedicated to all users who seek the easiest way to start with their first custom loop at the best price-performance ratio on the market! Everything you need to assemble your first custom loop with carefully chosen components that will last you a long time!This water cooling kit is compatible with the following CPU sockets: Intel LGA-1150/1151/1155/1156, Intel LGA-2011(-3), Intel LGA-2066, AMD Socket AM4.
Model: 3831109863473
BXQINLENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 255 ml CO2 Cooler
LENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 255 ml CO2 Cooler
Features :
Power consumption:19W
Rated voltage: DC 12V
Rated current: ——–
Max flow rate: 600L/H (158.5GPH)
Max static head: 5m (16.4FT)
Diameter of inlet: G 1/4″
Diameter of outlet: G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:——–
The Water Tank Size:length 210 MM, diameter 50MM.
NOTE:
1. Working at rated voltage (DC12V).
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden
Package:
1 X Water pump
1 X Water Tank
2 X G 1/4″ TO 5/16″
1 X Water Block
1 X G 1/4″ TO G 1/4″
2 X Stents
6 X Screws
Conclusion
By our suggestions above, we hope that you can found pacific m360 plus liquid cooling kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
