Best Msi Geforce Gtx 1080 Ti Cooling Block

The EK-Vector Strix RTX 2080 Ti RGB water block is specially designed for the ROG Strix version of NVIDIA® GeForce® RTX 2080 Ti graphics cards.

The water block covers the entire PCB length, and directly cools the GPU, VRAM and the VRM. The redesigned cooling engine has a larger footprint compared to the previous generation for better cooling performance

The EK® Vector Series water blocks use an Open Split-Flow cooling engine design. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used with reversed flow. 

The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. Sealing is ensured by high-quality EPDM O-rings.

The block is equipped with 4 12V RGB LED strips which are compatible with the motherboard 4-pin 12V RGB LED header. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

Both the NVIDIA® and ROG NVLink™ are compatible with this water block. 

ENCLOSED:

• EK-Vector Strix series high-performance water block
• Mounting mechanism with screw-in brass standoffs
• Necessary mounting screws, nuts, and washers
• 2x Nickel plated brass plug G1/4”
• 6mm Allen key
• Thermal pads
• Thermal grease EK-TIM Ectotherm (1g)

PLEASE NOTE:

ROG Strix RTX 2080Ti factory backplate is not compatible with this water block
Fittings are just for showcase and are not included
Should not be installed with any aluminum EKWB Fluid Gaming parts

Model: 3831109814123

Backplate is just for showcase and it is not included! This product should NOT be installed with any aluminum Fluid Gaming parts EK-FC1080 GTX Ti TF6 is a high-performance full-cover water block for MSI GEFORCE GTX 1080 Ti based graphics cards, based on NVIDIA Pascal architecture (GP102). Please check our Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti TF6 water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The top also features two pre-drilled slots for 3mm diodes. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. The factory backplate of the MSI GeForce GTX 1080 Ti Gaming 11G and MSI GeForce GTX 1080 Ti Gaming X 11G graphics cards is compatible with this water block. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC1080 GTX Ti TF6 water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that the old EK-FC Bridge & Link system is not compatible with this water block.

MSI GTX 1080 GAMING 8G twin Frozr VI thermal design raises the bar of graphics card Air cooling. Torx fan 2.0 is the enhanced version of the patented torx fan technology which generates 22% more Air pressure for better cooling performance while further reducing noise levels. The new fans are equipped with double ball bearings to ensure lasting smooth and silent operation. Connected to the huge heat sink are 8mm copper heat pipes with a squared shape at the bottom for optimal heat transfer from the solid nickel-plated copper baseplate combined with premium thermal compound x to keep the Pascal powerhouse cool.

NVIDIA’s flagship GeForce GTX 1080 Founders Edition is the most advanced gaming GPU ever created, powered by the new NVIDIA Pascal architecture. The GeForce GTX 1080 Founders Edition comes with ultra-fast FinFET and high-bandwidth GDDR5X technologies, plus support for DirectX 12 features to deliver the fastest, smoothest, most power-efficient gaming experiences.

Get the power to drive VR, ultra-high-resolution, and multiple monitors. Plus, bring more realism to every game with NVIDIA GameWorks technologies that deliver a true cinematic experience, smoother gameplay, and amazing new image-capture to share your game. All with the lowest latency and plug-and-play compatibility with leading VR headsets.

Lilink– 3 Sizes Aluminum Water Cooling Block Liquid Water Cooler Heat Sink System for CPU Graphics Radiator Heatsink

Specification:
Condition: 100% Brand New
Item Type: Water Cooling Block
Material: Pure Aluminum
Processing: Vacuum Aluminum Brazing
Interface outer diameter: Approx. 9.5mm / 3.7in
Interface inner diameter: Approx. 6mm / 2.4in
Application: Suitable for computer CPU water, industrial inverter drive, laser head cooling, industrial control cabinet cooling
Optional Size:
#1: Approx. 80 * 80 * 15mm / 3.1 * 3.1 * 0.6in
#2: Approx. 80 * 160 * 15mm / 3.1 * 6.3 * 0.6in
#3: Approx. 80 * 250 * 15mm / 3.1 * 9.8 * 0.6in

Package List:
1 * Water Cooling Block

Note:
1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Aluminum Water Cooling Block:

Specifications:
– Product Size: 40 x 40 x 12mm
– Processing: Vacuum Aluminum Brazing
– Polishing working surface and better heat absorption

Features:
❃ The internal flow channel is extruded into an M-shaped flow channel to maximize the hot and cold exchange area.
❃ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
❃ Applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.

Package Content:
2 X CPU Water Cooling Block

Conclusion

By our suggestions above, we hope that you can found msi geforce gtx 1080 ti cooling block for you.Please don’t forget to share your experience by comment in this post. Thank you!