Which Is The Best Liquid Cooling Memory Block

Pacific A1 DDR4 RAM water block is a Ram water block that comes with four sets of RAM heat sinks to provide two-way heat dissipations for RAM. The copper-based water block allows liquid cooling and the aluminum heat sinks provides heat sinks convection for the Ram. The water block is built with 12 high lumens addressable LEDs of 16.8M colors that can be controlled by TT RGB Plus ecosystem and sync with motherboards from Asus, Gigabyte, MSI and as rock that have a 5V addressable RGB header. Pacific A1 DDR4 RAM water block light up and cool down your memory modules easily!

p/N: cl-w239-ca00sw-a
dimension: 53.8 x 37 x 133.8 mm
1 x memory water block
4 x memory heat sink modules
1 x controller
Compatibility: DDR3, DDR4 (CPU socket)

The EK-FC Radeon VII water block with nickel plated cooling plate and acetal top directly cools the GPU, memory and VRM as liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance.

The EK Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speeds and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios.

The base of the block is made of nickel-plated electrolytic copper while the top is made of high-quality acrylic. Sealing is ensured by high-quality EPDM O-Rings. The front corner piece is lit up with LED strip.

This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

G1/4″ threaded fittings can be used on both sides of the FC terminal.

Enclosed:
– EK-FC Radeon VII series water block
– Mounting mechanism with screw-in brass standoffs
– Necessary mounting screws, nuts, and washers
– 2x EK plug G1/4”
– 6mm Allen key
– Thermal pads
– Thermal grease EK-TIM Ectotherm (1g)

PLEASE NOTE:

Fittings are just for show and are not included!
This product should NOT be installed with any aluminum Fluid Gaming parts!
Radeon VII stock backplates are compatible with EK-Vector Radeon VII water blocks only if installed with the stock backplate screws.

Model: 3831109816165

The EK-Vector Strix RTX 2080 Ti RGB water block is specially designed for the ROG Strix version of NVIDIA® GeForce® RTX 2080 Ti graphics cards.

The water block covers the entire PCB length, and directly cools the GPU, VRAM and the VRM. The redesigned cooling engine has a larger footprint compared to the previous generation for better cooling performance

The EK® Vector Series water blocks use an Open Split-Flow cooling engine design. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used with reversed flow. 

The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. Sealing is ensured by high-quality EPDM O-rings.

The block is equipped with 4 12V RGB LED strips which are compatible with the motherboard 4-pin 12V RGB LED header. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

Both the NVIDIA® and ROG NVLink™ are compatible with this water block. 

ENCLOSED:

• EK-Vector Strix series high-performance water block
• Mounting mechanism with screw-in brass standoffs
• Necessary mounting screws, nuts, and washers
• 2x Nickel plated brass plug G1/4”
• 6mm Allen key
• Thermal pads
• Thermal grease EK-TIM Ectotherm (1g)

PLEASE NOTE:

ROG Strix RTX 2080Ti factory backplate is not compatible with this water block
Fittings are just for showcase and are not included
Should not be installed with any aluminum EKWB Fluid Gaming parts

Model: 3831109814123

EK-FC1080 GTX Ti FTW3 RGB is a high-performance full-cover water block for EVGA GeForce GTX 1080 Ti FTW3 based graphics cards, based on NVIDIA Pascal architecture (GP102). The water block comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti FTW3 RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EKWB recommends the purchase of aesthetic retention backplate which improves the looks of your graphics cards and also provides some passive cooling to the circuit board VRM section. The EK-FC1080 GTX Ti FTW3 RGB water block is compatible with EK-FC1080 GTX Ti FTW3 Backplates and the factory EVGA backplate as well.

Model: 3830046996466

The EK-Annihilator Pro Narrow ILM is a dedicated server grade water block with 1U chassis compatibility which was specifically developed for LGA 3647 (Socket P) Intel® processors. The new server/workstation-grade CPU block is 1U chassis type compatible for use with server racks. This enterprise cooling solution is built for performance, reliability, serviceability and no compromises in mind.

The EK-Annihilator PRO Narrow water block features a total of 9 ports, which allow for versatile connectivity options. Three ports located on the top are standard G1/4″ threaded and are intended for workstations and taller server racks, while the 6 side ports, for low profile usage, are G1/8″ threaded.

EK-Annihilator PRO Narrow water block features a precisely machined copper base (‘cold plate’) which is made from purest copper available on the market and is treated with nickel electroplating. The top is made from CNC machined from thick and sturdy black POM Acetal and the CPU Square ILM and Narrow ILM hold-down brackets are made of laser cut stainless steel.

Intel® CPU socket compatibility:

• LGA 3647 (Socket P) Square ILM

Enclosed:

• EK-Annihilator Pro Narrow ILM CPU Water Block
• Necessary mounting screws, nuts, and washers
• 3x EK plug G1/4”
• 6x EK plug G1/8”
• 2x HFB Barb Fitting 6mm
• 2x HFB Barb Fitting 10mm
• 2x Barb clamp 6mm
• 2x Barb clamp 10mm
• 6mm Allen key
• 5mm Allen key
• 4mm Allen key
• 3/16mm Allen key
• Thermal grease (1g)

PLEASE NOTE:

1U chassis compatibility is guaranteed only with side G1/8″ ports being used.
The CPU block is equipped only with Narrow ILM mounting hold down.
This product should not be installed with any aluminum Fluid Gaming parts.

Model: 3831109813911

An RGB upgrade kit for existing EK-FC GeForce GTX FE high-performance full-cover water blocks that fit NVIDIA GeForce GTX and Titan X Pascal based graphics cards. The upgrade kit includes a 4-pin 12V RGB LED strip. The kit enables a quick and easy upgrade of the existing EK-FC GeForce GTX FE to the latest RGB version of the full-cover water block. The kit includes all necessary parts to perform the upgrade, including a fresh set of screws, thermal pads, O-rings, Allen keys, new RGB ready plexi top, aluminum cover with an already installed RGB strip and a fresh EK badge. The only things reused from the previous block are the nickel plated cold plate and the terminal. To avoid cracking your brand new RGB plexi top, use only 0.5 – 0.7 Nm of torque force on the terminal screws. Do not use excessive force when re-tightening the screws as the plexi top might crack or the threads might get stripped thus rendering the water block useless. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. Model: 3830046996848.

The EK-Vector RTX RE RGB – Nickel + Plexi water block is specially designed for multiple reference NVIDIA GeForce RTX Turing based graphics cards. It also offers extended compatibility fitting more reference design based cards.

It directly cools the GPU, VRAM and the VRM, and features a redesigned cooling engine with a larger footprint compared to the previous generation.

The EK-Vector RTX RE Series use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker or slower speed pumps. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed flow.

The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of acrylic material. Sealing is ensured by EPDM O-Rings. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers

G1/4″ threaded fittings can be used on both sides of the terminal. For multiple GPU connectivity, please refer to our offer of EK-Scalar GPU Terminals. 

The NVIDIA NVLink is compatible with this water block.

Enclosed:

– EK-Vector RTX RE series high-performance water block
– Mounting mechanism with screw-in brass standoffs
– Necessary mounting hardware
– 2x Nickel plated brass plugs
– Thermal pads / grease EK-TIM Ectotherm (1g)

PLEASE NOTE:

• NVIDIA RTX 2080 Founders edition factory backplate is not compatible with this block
• The EK-Vector GPU water block terminal cover is not compatible with FC Terminal X and FC Terminal (Legacy) multi GPU connectivity bridges
• This product should NOT be installed with any aluminum Fluid Gaming parts

Model: 3831109815885

The EK-Vector RTX RE Ti – Copper + Plexi water block is specially designed for multiple reference NVIDIA GeForce RTX Turing based graphics cards. It also offers extended compatibility fitting more reference design based cards.

The water block directly cools the GPU, VRAM and the VRM. Features a redesigned cooling engine that has a larger footprint compared to the previous generation. This results in a larger surface area for heat transfer.

The EK-Vector RTX RE Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker or slower speed water pumps. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed flow.

The base of the block is CNC machined out of electrolytic copper while the top is CNC machined out of acrylic material. Sealing is ensured by EPDM O-Rings. 

G1/4″ threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to our offer of EK-Scalar GPU Terminals. 

The NVIDIA NVLink is compatible with this water block.

Enclosed:

– EK-Vector RTX RE series high-performance water block
– Mounting mechanism with screw-in brass standoffs
– Necessary mounting hardware
– 2x Nickel plated brass plugs
– Thermal pads / grease EK-TIM Ectotherm (1g)

PLEASE NOTE:

• NVIDIA RTX 2080Ti Founders edition factory backplate is not compatible with this water block!
• The EK-Vector GPU water block terminal cover is not compatible with FC Terminal X and FC Terminal (Legacy) multi GPU connectivity bridges.
• This product should NOT be installed with any aluminum Fluid Gaming parts!

Model: 3831109815922

EK-Velocity is the new high-performance flagship premium quality CPU water block for modern Intel processors. It features a fresh design that will enable a vast number of variations and options for enthusiasts and demanding users as well! EK Velocity series CPU water blocks embed the 5th generation of the award-winning EK CPU water block cooling engine, further tweaked for performance and optimal coolant flow! Low hydraulic flow restriction enables this product to be used in setups using weaker water pumps or lower pump speeds for added silent operation, while still achieving top performance! The purest copper available on the market is used for the EK-Velocity cold plate which is precisely machined to a dense micro-fin structure. The contact surface itself is machine polished for a better contact with the CPU IHS. This version of the water block features a precisely machined bare copper cold plate with a CNC machined high-quality black POM Acetal top piece. The new cooling engine is characterized by the top-integrated jet nozzle which is combined with a thicker jet plate allowing a more precise bow control. The simplified water block structure offers a more optimized coolant flow and easier maintenance, while the interchangeable thick jet plate ensures the best contact surface for mainstream and HEDT Intel platforms. The block is equipped with a reinforced hold-down bracket, and the enclosed mounting kit includes all the necessary mounting screws, mounting springs, an Intel 115x backplate, rubber backplate gasket and a small tube of Thermal Grizzly Hydronaut high-performance thermal paste. The EK-Velocity CPU water block features a universal mounting mechanism that offers error-preventing, tool-less installation supporting Intel LGA-115x and LGA-20xx sockets out of the box. The mounting screws are streamlined and are even smaller than before for an added aesthetical perfection.

The EK-Vector FTW3 RTX 2080 RGB high-performance water block is specially designed for EVGA FTW version of NVIDIA® GeForce® RTX 2080 graphics cards. 

The water block directly cools the GPU, VRAM and the VRM as cooling liquid is channeled directly over these critical areas. Features a redesigned cooling engine that has a larger footprint compared to the previous generation of EK® Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance.

Uses an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed flow.

The base of the block is CNC machined out of nickel-plated copper while the top is CNC machined out of acrylic. Sealing is ensured by EPDM O-rings. 

The block is equipped with 4 12V RGB LED strip which is compatible with the motherboard 4-pin 12V RGB LED header. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

G1/4″” threaded fittings can be used on both sides of the terminal.

Both the NVIDIA® and EVGANVLink™ are compatible with this water block.

Enclosed:

– EK-Vector FTW3 series water block
– Mounting mechanism with screw-in brass standoffs
– Necessary mounting hardware
– 2x Nickel plated brass plug G1/4”
– 6mm Allen key
– Thermal pads/grease

PLEASE NOTE:

– EVGA FTW3® RTX 2080 factory backplate is not compatible with this water block!
– This product should NOT be installed with any aluminum Fluid Gaming parts!

Model: 3831109818749

Conclusion

By our suggestions above, we hope that you can found liquid cooling memory block for you.Please don’t forget to share your experience by comment in this post. Thank you!