The 8 Best Liquid Cooling Kit Hard
Nowadays, there are so many products of liquid cooling kit hard in the market and you are wondering to choose a best one. You have searched for liquid cooling kit hard in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings liquid cooling kit hard which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A
- Near Perfect Bends: Essential for making precise bends when using 16mm OD PETG tube
- Mandrels: Includes Mandrels for 45/90/180/360 degree bends
- Pipe Cutter: Professional Grade Pip Cutter provides perfect beveled edge cuts
- Insert: Silicone Tube insert prevents kinks and help promote smooth bends while keeping inner wall diameter
- Mounting: Pre-drilled holes allow easy mounting of mandrels to flat surface
- Recommended use of soapy water assists with tube insertion and tube heating
- Warranty: 2 Years
Thermaltake Pacific C360 Ddc Res/Pump 5V Motherboard Sync Copper Radiator PETG Hard Tube Water Cooling Kit CL-W243-CU12SW-A
- Analog/digital lighting Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync
- All included the C360 hard tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop
- Slim copper radiator the C360 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis
- C pro fittings build like a Pro with a new take on compression fittings. Engineered with four Built in O rings to provide maximum leak prevention and a secured compression seal
- Exclusive components W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15 ddc pump/reservoir combo
- 2 years
Thermaltake Pacific C360 DDC hard tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six C-Pro G14 PETG 16mm OD compressions, eight v-Tobler PETG tubes, an a RGB LED controller, and other accessories. p/N: cl-w243-cu12sw-adimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific C-Pro G14 PETG 16mm OD compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1tube- V-Tobler PETG tube 16mm OD 500mm x 8accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1- silicone insert x1. Do not let the pump run dry, when there is no liquid entering the pump turn off your power immediately
Similar items with 4 stars and above
Thermaltake Pacific Black 4 Build-in O-Rings C-Pro G1/4 PETG 16mm OD Compression Fitting 6 Pack CL-W214-CU00BL-B
- Fitment Reimagined: This new concept makes it easier than ever to install custom hard tube liquid cooling loops
- Four Built in O rings: Maximum leak prevention, secure compression seal, and peace of mind
- Protection You Expect: Surface treated and a special coating finish provides increased durability and protection from corrosion
- Build It Your Way: Compatible with liquid cooling components that utilize G1/4 thread ports and 16mm OD PETG, Acrylic, and Copper hard tubing
- Exclusively Designed Open End Wrench is Included
The Pacific C-Pro Series is a revolution in fitment design. It simplifies the process of setting up a custom liquid-cooling loop and provides a seal that outperforms traditional compression fittings. By using 4 preinstalled O-rings and an overhauled design, the C-Pro Series is the new standard in fitment technology and it is exclusive to Thermaltake.
P/N: CL-W214-CU00BL-B
Model: Pacific C-Pro G1/4 PETG 16mm OD 6 Pack – Black
Dimension: D26 x 21 (H) (mm)
Applicable: OD : 16 mm
Weight : 320 g
Material: CU + AL
Screw Thread: G 1/4
Note: PETG Tube to G1/4
Similar items with 4 stars and above
Bewinner DIY 240mm Water Cooling Kit, DIY 240mm Cooler CPU/GPU Block Pump Reservoir with LED Fan Heat Sink Computer Water Cooling Connectors Kit, All-in-one Liquid CPU Cooler Kit
- 【Professional Water Cooling Kit】All included:240mm heat sink+CPU/GPU cooling Block+2pcs LED fans+water pump with shock pad+Cylindrical Water Reservoir+Transparent Hose+A Set of Water Pipe Connectors.
- 【Super Water Circulation Cooling System】18 Pipe Aluminum Heat Exchanger Radiator,9W 600L / H Waterproof G1/4 Thread size High quiet water Pump,160mm High capacity Cylindrical Water Reservoir make the circulation system clear and visible,The extreme performance dual LED fans offer a high air static pressure.
- 【Universal Water Cooling Block】The CPU water cooling block made of copper and transparent plexiglass suitable for INTEL / AMD Dual Platform,the 0.8MM parallel waterway G1/4 universal thread GPU water cooling block made of copper and POM high temperature materials support 9.5mm ID / 12.7mm OD PU tube,or 10mmID/16mmOD solid tube,or 8mmID/12mmOD silicon tube.
- 【Complete Accessories】A Set of Water pipe joints & hose clamp & plug and a Inner diameter 8mm/Outer diameter 12mmTransparent hose,So you don’t have to worry about installation at all.
- 【100% Satisfaction Guarantee】 If you have questions about the product or are not satisfied with it, please contact us at any time, we will provide you with a best solution. Your satisfaction is our main concern.
Description:
This all-in-one liquid CPU cooler kit provides a 240mm heat sink, water pump, cylindrical water reservoir, dual fans, as well as installation accessories, which will dramatically improve heat dissipation experience, especially in terms of stability, silence, efficiency, and convenience. Liquid cooling simply works better than air cooling and the special design makes it easy for you to protect your valuable CPU.
Specifications:
1. 240mm black heat sink (with screw pack):
Appearance size: 27.5 * 11.8 * 3.2cm
Straight mouth height: 2cm
Diameter of straight tube: about 9.5 mm
Number of waterways: 18
2. LED fan:
Appearance size: 12 * 12cm
Power supply interface: large 4Pin + small 3Pin
3. Universal CPU block (with 4 pcs screws):
Description: Universal for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +)
Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
Screw size: G1 / 4
Outside diameter: 12.9MM
Bottom contact size: 5 * 5cm, thickness 3mm
Material: Bottom: copper; Cover: transparent plexiglass
Pacakage List:
1 x 240mm Heat Sink within Screw Pack
2 x LED Fan
1 x Universal CPU Block within 4 Screws
1 x Universal GPU Block within 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
1 x Transparent Hose
1 x Water Pump with Shock Pad
1 x A Set of Water Pipe Connectors & Hose Clamps & Plugs
Similar items with 4 stars and above
Thermaltake Pacific DIY PR22-Ddc 300ml 4600 RPM 3-Port G 1/4" Thread PPS Pmma Ddc Pump/Reservoir Combo CL-W250-PL00BL-A
- [Extreme performance] – 6mm thick reservoir can sustain the maximum pressure up to 21.75 psi
- [High capacity] – 210mm Long reservoir with 300Ml capacity
- [Ddc pump] – 4600Rpm pump speed with maximum flow rate of 522 L/h
- [Heat resistant Tank] – made of clear, reliable, light weighted pps and pmma construction, maximum working temperature Can reach 131℉ (55℃)
- [2-Way installation] – pr22-ddc can be installed either horizontally or vertically
- 2 year Warranty
Pacific pr22-ddc reservoir/pump Combo is a reservoir and ddc pump Combo unit kit. The combo features exceptional performances, The reservoir is 210mm long with 300ml capacity, and the DDC pump speed is 4600Rpm. Pr22-ddc is manufactured from high quality PPS and pmma Material to provide a crystal clear, high Performance, durable solution. By giving users ideal mounting, fitting and flow, the pr22-ddc is easy to install. Upgrade your system with pr22-ddc reservoir/pump Combo.
p/N: cl-w250-pl00bl-a
dimension: 86.5 (L) x 62 (W) x 210.1 (h)
material: PPS + pmma
capacity: 300 ml
pump speed: 4600 rpm
maximum head: 23 feet (7m)
maximum flow rate: 522.38 L/h
maximum pressure: 21.75 psi
input voltage: 12 connector: 4 pin
power input: 20 w
screw thread: g 1/4
parts
1. Stopper *1 (g 1/4 )
2. Bracket *2
Similar items with 4 stars and above
PrimoChill Rigid Tubing 45/90/180 Degree Water Cooling Bending Kit – 1/2 in. OD
Now making custom bends with rigid tubing could not be easier. With the PrimoChill Rigid Tubing 45/90/180 Degree Bending Kit – 1/2 in. OD you can make consistent bends every time! Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size. These tool has mount holes that allow you to mount to a hard surface for a more permanent work station.
Features
Specifications Compatibility
Parts Included
WarningsPractice using the bending tool on some scrap rigid until you get the hang of how best to use it!
PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.
Thermaltake Pacific DIY LCS RL120 Water Cooling Kit CL-W069-CA00BL-A
When looking for a complete DIY liquid cooling solution, the Thermaltake Pacific RL120 DIY Water Cooling Kit is now here. As a all-in-one Liquid cooling combo kit, Thermaltake provides everything needed to add exceptional performance to your CPU with a DIY style all together. Gain freedom to display and secure your cooling components in endless configurations for a one of a kind presentation. Take your cooling to the next level with the Thermaltake Pacific RL120 DIY Water Cooling Kit.
PC Water Cooling Kit, DIY Computer Water Cooling Set Water Row, SC600 Water Pump, Water Tank and Fans All-in-one Liquid CPU Cooler Kit
- Exclusive Components: SC600 Water Pump, Water Row, Water Tank,Cooling Fan Featuring exceptional performance and unrivalled reliability.
- Good Heat Dissipation: Customliquid cooling can give you much better cooling performance compared to all inone cooling systems and traditional air coolers as you can make specific tweaks to your system to have it perform better.
- Easy to Install: Small size, no space, the product is novel and easy to install, can be placed on the desktop.
- Wide Compatibility: The kit contains all the bits you need to customise your water cooling set up and have it match the rest of your system.
- It is suitable for your own cooling equipment, so that you can fully experience the fun of DIY.
Specifications:
1. Water Row
Size: Approx. 275 * 120 * 32 mm/ 10.8 * 4.7 * 1.3 in
Interface: G1/4 thread
Material: aluminum
Composition: single layer flat tube, flat tube 18
2. SC600 Water Pump
Rated voltage: 12V motherboard small 3-pin plug
Input current: 0.8A ±10%
Motor operating speed: 5600RPM ± 5%
Head: 4M±0.5M
Flow rate: 600L/H±10%
Startup voltage: 6V
Size: Approx. 71 * 56 * 46 mm/ 2.8 * 2.2 * 1.8 in (not include brackets and connectors)
Wiring color definition: red positive / black negative / white speed
Ceramic bearing, graphite bushing, very quiet, no water idling during use
Bracket hole distance: starting from the center of the hole, width 51.50mm, length 31.50mm
3. Fan
Size: Approx. 120 * 120 * 25 mm/ 4.7 * 4.7 * 1.0 in
Net weight: about 130g
Fan speed: 1200 ± 10% RPM
Maximum air volume: 50CFM
Maximum static pressure: 1.703mm-H20
Noise: 23.5DB (A)
Rated voltage: 12VDC
Working voltage: 10.8-13.2VDC
Starting voltage: 7VDC
Rated current: 0.25A
Power input: 3W
Bearing type: sleeve bearing
4. Water Tank
Size: Approx. 12 * 5.8 * 5.8 cm/ 4.7 * 2.3 * 2.3 in
Material: PMMA + anode aluminum
Intermediate transparent acrylic outer diameter: 50mm
Hole position: G1/4 thread *6
Color: Red
Equipped with adjustable plastic clips*1
Package Iist:
1 * Water Row
1 * Water Pump
2 * Fan
1 * Water Tank (Equipped with adjustable plastic buckle * 1)
6 * Fast Twist
7 * Screw Kit
1 * Water Flow Meter
3 * Hard Tube
2 * Water Row Stent
5 * Choke Plug
2 * I-Type Holder
2 * 90 ° Elbow
2 * 90 ° Stents
2 * Connector
Conclusion
By our suggestions above, we hope that you can found liquid cooling kit hard for you.Please don’t forget to share your experience by comment in this post. Thank you!