gadfurniture 
Nowadays, there are so many products of liquid cooling expansion for gpu in the market and you are wondering to choose a best one. You have searched for liquid cooling expansion for gpu in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings liquid cooling expansion for gpu which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Arctic MX-4 – Thermal Compound Paste for Coolers | Heat Sink Paste | Composed of Carbon Micro-Particles | Easy to Apply | High Durability – 4 Grams (1 Pack)
- [BETTER THAN LIQUID METAL]: Composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated efficiently.
- [SAFE APPLICATION]: The MX-4 is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA cards.
- [HIGH DURABILITY]: In contrast to metal and silicon thermal compound, the MX-4 does not compromise over time. Once applied, you do not need to apply it again as it will last at least for 8 years.
- [EASY TO APPLY]: With an ideal consistency, the MX-4 is very easy to use, even for beginners.
- [THERMAL COMPOUND]: Formula, the MX-4 guarantees exceptional heat dissipation from the components and supports the stability needed to push your system to its limit.
Thermal Compound for All CoolersEasy to ApplyWith an ideal consistency, the MX-4 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.Safe Application:It does not contain any metallic particles so electical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.High Durability :In contrast to metal and silicon thermal compound, the performance of MX-4 does not compromise over time. Once applied, you do not need to apply it a second time as it will last at least for 8 years. Value for MoneyA high performance thermal compound perfect for system builders, there’s no suprise that the MX-4 exceeds your expectations for its low price tag. Thermal Conductivity 8.5 W/(mK) Viscosity 870 poise Density 2.50 g/cm³ Volume Resistivity 3.8 x 1013 Ω-cm
Diyeeni DIY PC Water Cooling Complete Kit (120mm Radiator, 120mm LED Fan, 130mm Water Block, Expansion Tank, Pump, Hose), All in One CPU Liquid Cooling Kit
- This is a PC notebook water-cooled set, novel design and easy installation.
- Compared with the air-cooling heat dissipation, the water-cooling package has a more significant heat dissipation effect.
- Made of high quality acrylic + metal materials, sturdy and durable.
- The remote control battery is a CR2025 (not included).
- Small size, not occupy space, can be placed on the desktop.
Specifications:
1. 120mm Heat Dissipation Water-cooled Row *1 (including screw package)
Product appearance size: 15.5 * 11.8 * 3.2cm / 6.1 * 4.65 * 1.26inch
Suitable for pipes up to 12 mm in diameter.
Outer diameter: 16mm / 0.63inch
Material: Aluminum
Pipeline: 18
Application: water cooling system heat exchange
Surface treatment: powder coating
2. LED Fan *1
Product appearance size: 12 * 12cm / 4.72 * 4.72inch
Power supply interface: 4Pin
3. Universal CPU Cooling Block *1 (including 4 fixing screws)
Outer diameter size: 13mm / 0.51inch
Bottom contact size: 5.8 * 5.8cm / 2.28 * 2.28inch, thickness 3mm / 0.12inch
Material: Copper at the bottom and transparent plexiglass on the top cover
4. Cylindrical Water Tank *1 (including plastic bracket * 2, metal bracket * 2, a pack of screws)
Water tank height: approx. 200mm / 7.87inch
Water tank diameter: 5.5cm / 2.17inch
Interface diameter: 13mm / 0.51inch
5. C9 Water Pump *1 (including shock cushion)
Features: Waterproof, high stability, quiet, long life
Interface diameter: approx. 13mm / 0.51inch
Pump body size: overall (L*W*H) 7.5 * 5 * 5cm / 2.95 * 1.97 * 1.97inch
Material: Acrylic
Power: 15W
Voltage: 12V
Flow rate: 8L/Min
6. Water Pipe
Length: 207cm/8.86ft
7. Controller
Size (L*W*H): approx. 9 * 4.5 * 1.7cm / 3.54 * 1.77 * 0.67inch
Package Iist:
1 * Shock Cushion
2 * U-type Bracket
2 * Right Angle Bracket
4 * Pack of Screws
1 * Fan
1 * Light Bar
1 * Water Pump
1 * Water Cooled Row
1 * Water Pipe
1 * Water Tank
1 * Remote Control
1 * Controller
1 * Water Cooling Block
Cooler Master MasterCase H500M ATX Mid-Tower w/ 4x Side Tempered Glass Panels, Type-C I/O Panel, 2x Vertical GPU Card PCI Slots & 2x 200mm ARGB Fans w/ARGB Controller
- Four Tempered Glass Panels : Edge to edge glass side panels on both sides, a glass top panel, and a glass front panel offer a clear and comprehensive system view
- Glass & Mesh Options Included : Choose between the glass front panel for a balance of aesthetics and performance or run full mesh for optimized airflow with the included accessory
- Rich Connectivity : The I/O panel comes with a USB 3.1 (Gen 2) Type C port, and four additional USB 3.0 ports
- Covers For Clean Building : A total of 9 covers take clean building to the next level with a PSU cut out cover that provides the option of showing off your PSU or leaving it out of sight
- Two 200 millimeter Addressable RGB Fans & Controller : Move air stylishly and quietly with two Addressable RGB Fans controlled by an included ARGB controller
- EXPANSION SLOTS: 7+2
ZJchao 200ml Acrylic Water Tank Cooler Water Cooling Radiator Pc CPU Water Block
200ml Acrylic Water Tank Cooler Water Cooling Radiator Pc Cpu Water Block
Water cooling with use, easy to add water and the removal of the waterway air, very practical
Size: 80 * 60 * 60mm
Capacity: 200ml
Suitable water cooling pipes on silica gel in an inner diameter of 8-10mm
Note: Due to the pre-delivery will leak detection tests, so there will be a small amount of water-soaked tank
Alphacool 11473 Eissturm Blizzard Copper 45 3x120mm – Complete kit Water Cooling Kits, Systems and AIOs
With the new Eissturm sets you get all the components you need for your start into the world of water cooling. The sets are not only for beginners but also for professionals. All components used are optimally matched and come from Alphacool’s high-end series. Alphacool makes no compromises when it comes to materials and relies on pure copper or brass for all metals. This guarantees outstanding cooling performance. With the set you can easily cool your CPU and you can also integrate any graphics card cooler into the circuit. Thanks to the enclosed quick-release fastener, they do not have to empty or modify the circuit.
Alphacool 11480 Eiswolf 120 GPX Pro AMD RX Vega M01 – Black Water Cooling Kits, Systems and AIOs
Alphacool developed a completely new pump design to minimize the pumps volume and increase performance, and the suction pump was born. Through its suction principle, less turbulence is created in the water, allowing for a more even flow. This also makes the pump nearly inaudible a first in the AiO market.
Naturally, the cooler comes with a backplate that is directly attached to the cooler after installation, ensuring better heat transfer and distribution. This significantly improves the cooling performance. Additionally, it offers an aesthetic improvement in that the graphics card PCB is barely visible from the side. All that remains is a slight opening for the electrical connection and SLI/CrossFire Connector, of course.
The cooler is also built modularly. Should you need to buy a new graphics card, you wont need to buy a whole new cooler as well. Only the aluminium section will need to be replaced. Alphacool offers special uprgrade kits for this, which reduces costs for your next modification. This, too, is unique in the AIO market.
The hoses and connectors are also based on standard water cooling components. The hose is encased in anti-kink springs and comes in the 11/8mm size. The connectors have standard G1/4 threads and can therefore be exchanged for any other model or size desired.
The two quick-release fasteners allow the cooler to fit easily into any cooling loop. If you are using the Alphacool Eisbaer CPU AIO water cooler, you can easily connect it with the Eiswolf GPX-Pro using the quick-release fasteners. Using the Eisbaer gives you a redundant system, as you have two pumps in the loop. In the unlikely event that one pump fails, the other can still support the cooling loop. This is security at its highest level.
Alphacool 12563 Eisbaer GPX Extension Set (Tubes and Fittings) Water Cooling Kits, Systems and AIOs
With the Eisbaer Quick-Connect Extension Set, expanding the cooling loop of an Eisbaer or Eiswolf GPX-Pro cooler with additional components is simple. For example, it’s easy to add another radiator, an additional cooler, or other any other components. The set consists of two 32cm long hoses in 11/8 format, encased in anti-kink springs. This prevents bending in the hoses, and thereby prevents interruptions in the water flow. Safety is our top priority. Two ends have straight connectors, pre-installed on the hoses. The only thing you need to do is screw these into the corresponding G1/4” threads. On the other end are the ends of two quick-release safety locks from the Alphacool HF series, just like the ones found on the Eisbaer or Eiswolf. That means all you have to do is open the quick-release locks on the Eisbaer or Eiswolf and screw them together with the corresponding parts in this kit and an additional product for expansion, and your loop is complete – after it’s been filled, of course. Technical Details: Hose length: 32cm Quick Connector Material: nylon Colour: black G1/4” threads 11/8 hose size Scope of Delivery: Alphacool Eisbaer GPX Extension Set (tubes and fittings) Notice for Expansion: Please take care not to mix up the IN and OUT ports. ON the Eisbaer, the “outlet” is marked in “red”, and the “inlet” in “blue”. On the components to be connected, it is the opposite. The coupling with the “blue” marking denotes the “outlet” and the coupling with the “red” marking denotes the “inlet”. This is important as in many coolers the flow direction is crucial for optimal cooling performance.
Aquacomputer aquaero 6 XT black/blue USB fan controller, graphic LCD, touch control, IR remote control
- Programmable four channel fan controller Graphic LC display with backlight (except LT version) USB 2.0 and aquabus interface
- Four fan outputs with up to 30 Watt of power per channel All fan outputs with 4-Pin plug, switchable between coltage and PWM control Versatile control options
- Eight temperature sensor inputs Flow sensor input Universal IR receiver (except LT version) Three LED outputs
- Extensive alarm options Acoustical alarm Speed signal output for status evaluation Expandable to a maximum of 12 fan channels
- Color:silver Manufacturer:Aquacomputer Material front:Stainless steel Design:1x 5,25″ Drive bay Display:Yes Output voltage:5 – 12V DC Number of outputs:4x 4Pin PWM Max. Power / Channel:30W Number of sensors:8x 2Pin (10kOhm) Power supply:4Pin Molex 5V/12V DC
The aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface. All speed parameters and sensor values can be set and visualized in an user-friendly menu or through an even easier to use PC-software. Additionally, the graphic LC display can be used to display almost any information using the popular LCD software LCDHype. In maximum configuration, the following devices can be connected to an aquaero 6 simultaneously 2x aquastream XT/ULTIMATE pumps 8x poweradjust 2/3 1x aquaero 5/6 LT (in this case only 4x poweradjust 2/3) 4x mps based devices (flow sensor, pressure/fill level sensor and D5 pump with aquabus) 2x farbwerk controller 1x Real Time Clock expansion module Scope of delivery aquaero 6 XT controller remote control aquaremote four temperature sensors, length approx. 70 cm one internal USB cable, length approx. 100 cm one connection cable for speed signal or aquabus manual mounting material for installation into a free extension bay Color:silver Manufacturer:Aquacomputer Material front:Stainless steel Design:1x 5,25″ Drive bay Display:Yes Output voltage:5 – 12V DC Number of outputs:4x 4Pin PWM Max. Power / Channel:30W Number of sensors:8x 2Pin (10kOhm) Power supply:4Pin Molex 5V/12V DC
Diyeeni DIY PC Water Cooling Kit, CPU Liquid Cooling Systems Including 240 / 120mm Radiator, 3 LED Fans, CPU Cooler, Expansion Tank, Quiet Pump, 6 Hard Tube, for Intel, for AMD
- CPU Block: The CPU block is constructed with a copper base to provide exceptional heat transfer and cooling performance.
- Cylindrical Water Reservoir: The cylindrical water reservoir is manufactured from high quality transparent acrylic so that the circulation system is visible.Water Pump: Waterproof, stable, high quiet, long life.
- Heat Sink: Comes with two heat sink, one is 120mm, the other is 240mm. Provide the excellent heat dissipation, as you need for highly overclocked desktop processors.
- LED Fan: The extreme performance 3 fans offer a high air static pressure with lower noise. Rigid Tube: Can be bent when heating, also can be cut to meet your need.
- Package List: 1x240mm Heat Sink with Screw Pack, 1x120mm Heat Sink with Screw Pack, 3xLED Fan, 1xCPU Block with 4 Screws, 1xCylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket), 6xBlue Rigid Tube, 1xWater Pump with Shock Pad, 8xTwo-Touch Fitting, 1xWater Feeder, 1xWater Plug, 1xNipple Connector, 1xVent Plug
Note: The CPU water block is universal type, suitable for INTEL 775,1150,1155,1156,1366 and suitable for AMD AM2, AM3, AM3+ Dual Platform. GPU water block is not included, please buy it separately.
Alphacool 11481 Eiswolf GPX Pro – AMD RX Vega M01 – incl. Backplate Water Cooling GPU – Water Blocks
Alphacool developed a completely new pump design to minimize the pump’s volume and increase performance, and the suction pump was born. Through its suction principle, less turbulence is created in the water, allowing for a more even flow. This also makes the pump nearly inaudible – a first in the AiO market.
Naturally, the cooler comes with a backplate that is directly attached to the cooler after installation, ensuring better heat transfer and distribution. This significantly improves the cooling performance. Additionally, it offers an aesthetic improvement in that the graphics card PCB is barely visible from the side. All that remains is a slight opening for the electrical connection and SLI/CrossFire Connector, of course.
The cooler is also built modularly. Should you need to buy a new graphics card, you won’t need to buy a whole new cooler as well. Only the aluminium section will need to be replaced. Alphacool offers special uprgrade kits for this, which reduces costs for your next modification. This, too, is unique in the AIO market.
The hoses and connectors are also based on standard water cooling components. The hose is encased in anti-kink springs and comes in the 11/8mm size. The connectors have standard G1/4” threads and can therefore be exchanged for any other model or size desired.
The two quick-release fasteners allow the cooler to fit easily into any cooling loop. If you are using the Alphacool Eisbaer CPU AIO water cooler, you can easily connect it with the Eiswolf GPX-Pro using the quick-release fasteners. Using the Eisbaer gives you a redundant system, as you have two pumps in the loop. In the unlikely event that one pump fails, the other can still support the cooling loop. This is security at its highest level.
AMD Graphics Card Compatiblity List
Eiswolf Broschüre
Conclusion
By our suggestions above, we hope that you can found liquid cooling expansion for gpu for you.Please don’t forget to share your experience by comment in this post. Thank you!
