gadfurniture 
Nowadays, there are so many products of hotwater tank heating element 3380 watt in the market and you are wondering to choose a best one. You have searched for hotwater tank heating element 3380 watt in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings hotwater tank heating element 3380 watt which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Rheem SP10552MH Resistored HWD with Screw-In 240-volt/4500-watt Element
- For best results, use only Rheem replacement parts for repairing your Rheem Water Heater
- Watt Density Classification: HWD, Input Voltage (V): 208, Input Voltage (V): 240, Wattage at 208V (W): 3380, Watt Density at 208V (W/sq. in.): 156
- Wattage at 240V (W): 4500, Watt Density at 240V (W/sq. in. ): 208, Cold Resistance (ohms): 12.80, Outer Sheath Material: Copper
- Element Diameter (in.): .260, Element Length – Flange to Tip (in.): 13.50, Mounting Type: Threaded, Actual Thread Size – Outside Diameter(in.): 1-9/32
- Thread Type Series Designation: NPSM, Configuration: Straight, Nominal Thread Size – (in.): 1, Threads per Inch: 11-1/2
Product Description
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
Camco 02852/02853 1500W 120V Screw-In Lime Life Foldback Water Heater Element – Ultra Low Watt Density
Camco 02482/02483 1650W 120V Screw-In Water Heater Element – High Watt Density
Product Description
1650W, 120V, Water Heater Screw-In Element, Use For 6 Gallon Water Heaters.
From the Manufacturer
Camco’s 1650W 120V screw-in type high watt density water heater elements can be used in all replacement situations if the same wattage and voltage are used. High Watt Density are the most common and the same type of element provided with most water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
EcoSmart 8 KW Electric Tankless Water Heater, 8 KW at 240 Volts with Patented Self Modulating Technology
Product Description
This Smart Technology electric tankless water heater is configured as a “whole home” model for one bathroom residences in climates where incoming water temperature is 67°F and above. This model is well suited for heating nearly 1.5 gallons per minute to 105°F at that inlet temperature, which is the equivalent of one water saver shower head. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 8 requires a minimum 100 amp electrical panel for installation with (1) 40 amp double pole breaker connected to (1) set of #8 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.
From the Manufacturer
This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.
Dernord 120V 1650W Foldback Water Heater Element Screw-In Lime Life Heating Element with Low Watt Density
- Low Watt Density Stainless Steel Foldback Water Heater Element
- Foldback Water Heater Element provides 1650w 120v of power
- Element is folded back to minimize length and maximize heated surfaces
- Easy to Install and fits most Water Heater Models of American
- Resists dry firing, lime deposits, and sand that would burn out ordinary elements
Product Features
1650W Foldback Water Heater Element : Replacement American standard water heater parts
From the Manufacturer
The Dernord 120v 1650w low Watt Density Screw in Foldback Water Heater Element has a compact, energy efficient design that is well suited for many applications. The element is folded back to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.Contains 1 – Element And 1 – Gasket, 12″ Minimum Tank Diameter. Fits Ace, State, Reliance, Sears, Rheem, Rudd, Montgomery Ward And Most Other Water Heaters that use a 120V screw in style replacement.
Technical Details
Item Weight: 11.45 ounces
Origin: China
Color: White
Tube length: 250mm
Tube diameter: 8mm
Item Package Quantity: 1
Mounting Type: Threaded
DERNORD 12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPT Fitting Double U Type
- 12v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
12V 600W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 12v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:12 volts
Wattage:600 watts
Item Weight:10.95 Ounces
Product Diameter: 8mm
Tube length: 170mm
Screw Type:1”NPT
Color:White
Conclusion
By our suggestions above, we hope that you can found hotwater tank heating element 3380 watt for you.Please don’t forget to share your experience by comment in this post. Thank you!
