gadfurniture 
Nowadays, there are so many products of heating cable thermostat in the market and you are wondering to choose a best one. You have searched for heating cable thermostat in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating cable thermostat which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
HEATIT ET-21 Freeze Thermostatically Controlled Outlet On at 38F /Off at 50F
- Thermostat control outlet with the smart indicator light: The indicator light turns on when it’s below 38 and it has energized the outlet.
- Energize below 38℉(3℃) and to turn off automatically at approximately 50℉(10℃). Automatically turns power on and off according to ambient temperature. Save energy and save money
- Easy installation: just plug this device into electrical outlet. Maximum 15 amps. CSA approved. Only for dry location.
- Can be use for other applications: 120 VAC electric heaters, gas heater, Engine heaters, pipe heat tape, roof heating cable and so on
- Make a test when you received the product. Put it into the freezer for 45 minutes. And then plug in and you will see the red light on the thermostat control. Two year limited warranty- If you are not completely satisfied with HEATIT ET-21, please don’t hesitate to contact us in any time, we’ll try our best to solve your issues.
HEATIT HISD 3-feet Pipe Heating with Built-in Thermostat, Black
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues.
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
- Copper
Similar items with 4 stars and above
Wireless Programmable Thermostat Plug, Hycency Automatic Heating & Cooling Outlet Thermostat Wireless Temperature Controller Built in Temp Sensor with Remote Control LCD Display (1 Pcs)
- PROGRAMMABLE THERMOSTAT: Programming the thermostat via the remote control, control distance reaches 66ft in the open area. With heating and cooling mode, thermostat allows you to program at temperature range 32-158℉(0-70℃).
- SAVE MONEY: This thermostat will help make your home not only Comfortable but energy efficient. The thermostat can save energy costs on heating or cooling. It saves energy by adjusting the temperature.
- INSTALLATION: No installation or wiring, just plug thermostat into an outlet, plug your portable heating or cooling unit into the thermostat, and you’re ready to go. You can move thermostat plug to your desired position, convenient and flexible.
- EASY TO USE: Automatic matching remote control and thermostat plug. select the heating or cooling mode via the remote control and set the target temperature. Accurate temperature control of ±1℃ for consistent comfort. Choice of ℉ or ℃ temperature display on LCD.
- SAFE AND RELIABLE: 3-Prong thermostat plug with grounded terminal, recoverable overload short circuit and maximum load current up to 15A. Suitable for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater.
Hydrofarm JSHC48 JumpStart Soil Heating Cable, 48-Feet, Black
- Place in ground to speed germination and seedling growth with gentle heat
- Perfect indoors or out, this cable is 48 feet long, safely encased in a tough, waterproof PVC coating with orange color for visibility
- Cover the cable with 3 to 4 inches of soil, then plant your seeds, seedlings, or plants above this height
- It is designed to last for many seasons, offering an economical and effective solution to the problem of cold weather slowing down your garden
Jump start heating cable – place in ground to heat soil for seed germination – forty eight feet long – bright orange for visibility.
Frost King HC6A 6 Feet Automatic Electric Heat Cable Kits, Black
Hycency Programmable Thermostat Outlet, Heating & Cooling Plug in Thermostat (Black)
- Programmable Thermostat outlet: The thermostat outlet comes with heating and cooling mode. It is programmed by the remote control and the temperature control range is 32-158℉(0-70℃). Control distance reaches 66ft in the open area. Choice of ℉ or ℃ temperature display on LCD.
- Energy Saving: This hycency thermostat outlet saves energy by reducing wasted energy in your home. it can help save energy costs on heating or cooling and make your home not only Comfortable but energy efficient.
- No need installation: Plug and play, no installation or wiring, easy to use. plug your portable heating or cooling unit into the thermostat outlet, and you’re ready to go.
- Easy Operation: Remote control and thermostat outlet automatically match, then select heating or cooling mode and set the target temperature. thermostat will play with your home device. Built-in temperature sensor for accurate reading temperature.
- APPLICATION: The thermostat plug allows control any 120 volt device up to 15 amps. It can help you control the room temperature accurately. Suitable for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater,etc.
This Hycency programmable thermostat outlet is designed for
automatic control of electric heating unit or cooling unit. It consists of
2 parts: a thermostat outlet and a remote control. Backlight LCD
screen on the remote control for accurate data reading.
Temperature sensor is built in the remote control. it could
automatically detects the ambient temperature and send a signal to
the thermostat socket every 20-30 seconds. The thermostat socket
stops heating or cooling when the current temperature is equal to the
target temperature, provides comfort and energy saving.
Features:
1. Plug and play type, no need installation
2. Heating Mode and Cooling Mode switchable
3. LCD with green backlight
4. Display current temperature and target temperature
5. °C/°F switchable
6. Easy setting with memory function
7. High/Low temperature warning:
Low temperature: ≤0°C, current temperature shows LL
High temperature: ≥70°C, current temperature shows HH
8. Low battery warning: The symbol of battery is flashing when the battery voltage is lower than 2.7V
9. RF 433Mhz RF technology
10. Portable design, hold in hand/stand on table/wall mounted
Specification:
Color: White
Material: ABS+PC+Metal
Plug Type: USA Plug
Max Rating: 120V/15A/60Hz, 1800W Max
Transmission Frequency: 433.92MHz
Max. Range: 66ft in Open Area
Current Temp. Range: 0°C~70°C or 32°F~158°F
Target Temp. Range: 0°C~70°C or 32°F~158°F
Temperature Resolution: ±1°C/±1°F
Remote Control Power: 2 * AAA 1.5V Batteries (Battery is not included)
Notice:
There are 2 ways to reset your mode:
1. Reinstall the battery
2. Long press the ON or OFF, and then long press ON and OFF at the same time.
Package:
1 X Thermostat Outlet
1 X Remote Control (Battery is not included)
1 X User Manual
Similar items with 4 stars and above
Lux WIN100 Automatic Heating & Cooling 5-2 Day Programmable Outlet Thermostat, Compatible with Portable A/C, Fans, and Space Heaters
- PROGRAMMABLE: This 5-2 day thermostat allows you to program weekdays and weekends at different temperatures
- EASY TO USE: Comes with easy to use touch keys and displays the current temperature for easy reference
- INSTALLATION: No installation or wiring, easy to plug in and select the desired heat
- COMPATIBLE: Easy to use with portable space heaters, window air conditioners, and circulating fans
- SPEED DIAL: User friendly dial to set weekend, weekday, and day and time heating and cooling temperatures
Product Description
Programmable outlet thermostat allows control any 120 volt device up to 15 amps. Use with a fan or air conditioner for cooling purposes. Also may be used with a space heater for heating purposes. Separate programs for heating and cooling. Setting Range 45 DegreeF to 90 DegreeF (7 DegreeC to 32 DegreeC) with DegreeF/ DegreeC selectable. Temporary temperature override and a manual hold. Adjustable temperature differential/cycle rate. Mode slide switch and a positive on/off switch. 120VAC outlet powered. 12 hour clock only. 2 G13A size 1.5V alkaline batteries included (for clock only). On-screen low battery indicator. Battery free memory storage. 5 minute short cycle protection. Time and temperature alternate in display.
Amazon.com
Designed for use with space heaters and air conditioners that automatically restart after power reconnection, the Lux WIN100 5-2 Day Heating and Cooling Programmable Outlet Thermostat offers the comfort, convenience, and energy saving benefits of full programmability. To use, just plug the WIN100 into an outlet, plug your portable heating or cooling unit into the thermostat, and you’re ready to go.
|
 The WIN100 can be programmed before it’s plugged into the wall. |
 The patented Lux Speed Dial allows for easy programming. |
Create Different Programs for Weekdays and Weekends
The WIN100 allows you to enjoy the benefits of a programmable thermostat for your heating or cooling unit. This model offers the convenience of 5-2 day programming so you can create different programs for weekdays and weekends.
The WIN100 also boasts a positive on/off switch, and a heat/cool switch that allows the use of this product for two seasons: summer and winter.
User-Friendly Operation
Offering straight-forward operation, the WIN100 has a patented Lux Speed Dial for easy programming, a positive on/off switch for streamlined operation, and battery-free memory storage.
For added convenience, this ETL-approved thermostat can be programmed before it’s plugged into the wall. Once programmed, it operates off of a standard 120-volt wall outlet (with ground), and it comes with two 1.5-volt G13 alkaline button cell batteries for the clock.
Save Money and the Environment
Like all programmable thermostats, the WIN100 helps reduce energy consumption, but this efficient device takes savings a step further. To maximize your home’s energy efficiency, the WIN100 comes preprogrammed with default heating and cooling schedules that are designed to save up to 33% on energy costs over a year and also help cut down on your carbon footprint. Because the WIN100 is 100% mercury free, you can be sure it’s a safe and environmentally conscious choice for your home.
About Lux: Innovation, Quality, and Value
Since 1914, Lux Products Corporation has manufactured quality products for the home. It all began with turn-of-the-century timing devices, the forerunners of the now world-famous Lux 60-Minute Timers. Building on the success of these simple and utilitarian items, Lux grew into the multifaceted manufacturer and merchandiser it is today. The Lux name has always stood for innovation, quality, and value. The company’s full line of electronic and mechanical thermostats offers models for nearly every heating and cooling application. See how you can save money and conserve energy with Lux.
What’s in the Box
Lux WIN100 5-2 Day Heating and Cooling Programmable Outlet Thermostat, installation guide, instruction manual, and two 1.5 volt G13 alkaline button cell batteries.
 Not sure which model is right for you? Click here for a complete comparison LUX programmable thermostats. |
HEATIT JHSF1-CT Self Regulating Pre-assembled Pipe Heating Cable Roof & Gutter De-icing 50-feet 120V
- HEATIT is registered Trademark by zhukeshi(We didn’t authorize other sellers in Amazon.com). Suitable for use on plastic and metal water pipes( including inlet pipe,drain pipe, sewer, palm tree frost protection etc). Industrial grade self regulating heating cable. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.ETL approved.
- Fluoropolymer (Industrial grade: One of the most heavy duty plastic material) as the outer jacket. JHSF1-CT cables are configured for use in nonhazardous and hazardous locations, including areas where corrosives may be present. Exposure to organic chemicals or corrosives. Can be used underwater application. Please keep the connection (Meet water proof IP65) between the orange cold lead and black heating cable above the water level. The black heating cable including end seal meet water proof IP68
- Protect pipes up to 2 1/2″ in diameter. For a better freeze protection, at least 1/2 inch thick or thicker insulation material is recommended, especially for extremely cold weather. If the ambient temperature is lower than -20°F(-29°C), please use 1″ thick insulation material. Pre-assembled, Including grounded plug with light, easy to install install and use without built in thermostat. 120 volt, 5 watts/ft at 50 degrees F for pipe freeze protection. 6ft 18/3 cold lead with grounded plug.
- Roof deicing application: Can be used on flat roofs, metal roofs, asphalt roofs, rubber roofs, slate roofs, stone roofs, metal roofs, ceramic roofs, composite (tar and gravel) roofs and so on. Rated 10W/ft at 32°F (0°C) for roof deicing. For roof deicing application, you may need to buy clips and hangers separately.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable Normally you can feel the slight warm on the heating cable in few minutes. Ten year limited warranty – If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we’ll try our best to solve your issue.
Similar items with 4 stars and above
Easy Heat EH-38 Freeze Thermostatically Controlled Valve and Pipe Heating System
- Automatically energizes the heating cable at temperatures lower than 3°C/38°F
- Reduces the risk of frozen pipes while saving energy
- May be used to control other electrical devices that need to be activated when the temperature approaches the freezing point
- 15 AMP rating
This thermostat automatically energizes the heating cable at temperatures lower than 3°C/38°F, reducing the risk of frozen pipes while saving energy and eliminating the need to unplug cables each spring. It can also be used to control other electrical devices that need to be activated when the temperature approaches the freezing point. The EH38 thermostat is rated at 15 amps with resistive load at 125 Vac, and is UL Listed to US and Canadian Safety Standards.
9milelake Cold Weather Pipe and Valve Heating Cable with Built-in Thermostat (6 Feet)
- Pre-assembled for easy installation,Easy Heat pipe heating cable installs quickly and easily to keep
- Includes grounded plug, built in thermostat, and instructions,
- Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant
- units are activated and de-activated by an integral energy-saving thermostat
- Approved for rigid plastic and metal pipe
Description Say goodbye to frozen pipes in the winter with the 9milelake Pipe Heating Cable – Lenghth Option: 3ft,6ft,9ft,12ft,18ft,24ft,30,40ft .
This temperature-controlled cable runs along pipes and valves, thawing frozen pipes.
The built-in thermostat will sense the temperature of the pipe and turn the cable on and off to provide the most economical solution for frozen pipe disasters.
Use only on water-filled metal & plastic pipes.
How it Works Before applying the heating cable, make sure that the area on and around the pipe is clear and that the heating cable is warm and pliable.
Simply secure the thermostat tightly against the pipe with electrical tape, secure the heating cable straight along the pipe, plug the cable into the nearest grounded electrical receptacle, and let the heating cable work its magic.
The built-in thermostat will automatically detect the temperature of the pipe and turn the cable on when exposed to temperatures below 38°F (3°C) for frost-free pipes all winter long.
It will shut the heating cable off when the pipe has been heated to a temperature of approximately 45°F, incurring no extra electricity costs. What’s Included Package includes cable with grounded plug and built in thermostat, user-friendly instructions
Conclusion
By our suggestions above, we hope that you can found heating cable thermostat for you.Please don’t forget to share your experience by comment in this post. Thank you!
