gadfurniture 
Nowadays, there are so many products of heating return air vent in the market and you are wondering to choose a best one. You have searched for heating return air vent in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating return air vent which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
30"w X 8"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 31.75"w X 9.75"h]
- 30″w X 8″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 31.75″ Width X 9.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall
- QUALITY PACKAGING – Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- HEAVY STEEL CONSTRUCTION – No Scuff Powder Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
- UNRESTRICTED AIRFLOW For Your HVAC System – 50° Angled To Provide Maximum Airflow – ½ Inch Spaced Fins
HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors,
DIY projects, and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project
look no further than HVAC Premium. We have the largest selection of Grilles Registers and Diffusers.
HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!
30″w X 8″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 31.75″ Width X 9.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
This grille has a high standard of design, production and finish on all products.
How To Measure A Grille
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a
20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
Similar items with 4 stars and above
16"w X 4"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 17.75"w X 5.75"h]
- 16″w X 4″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 17.75″ Width X 5.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall
- QUALITY PACKAGING – Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- HEAVY STEEL CONSTRUCTION – No Scuff Powder Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
- UNRESTRICTED AIRFLOW For Your HVAC System – 50° Angled To Provide Maximum Airflow – ½ Inch Spaced Fins
HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors,
DIY projects, and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project
look no further than HVAC Premium. We have the largest selection of Grilles Registers and Diffusers.
HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!
16″w X 4″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 17.75″ Width X 5.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
This grille has a high standard of design, production and finish on all products.
How To Measure A Grille
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a
20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
14" X 24 Steel Return Air Filter Grille for 1" Filter – Removable Face/Door – HVAC Duct Cover – Flat Stamped Face – White [Outer Dimensions: 16.5 X 25.75]
14″ X 24 Steel Return Air Filter Grille for 1″ Filter – Removable Face/Door – HVAC DUCT COVER – Flat Stamped Face – White [Outer Dimensions: 16.5 X 25.75]
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has ½” fin design
This model can have the face/door removed.
This model uses a 1″” thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75″”.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.”
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
16"w X 12"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 17.75"w X 13.75"h]
- 16″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 17.75″ Width X “w X 13.75” Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
- Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Easy Unrestricted Air Flow For Your HVAC System – 50° angled to provide maximum airflow
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
16″w X 12″h Steel Return Air Grilles – Sidewall and Cieling – HVAC DUCT COVER – White
16″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 17.75″ Width X “w X 13.75” Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
Some of the best features aren’t readily apparent, but you will appreciate the benefits over the period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
14"w X 12"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 15.75"w X 13.75"h]
- 14″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15.75″ Width X “w X 13.75” Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
- Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Easy Unrestricted Air Flow For Your HVAC System – 50° angled to provide maximum airflow
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
14″w X 12″h Steel Return Air Grilles – Sidewall and Cieling – HVAC DUCT COVER – White
14″w X 12″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15.75″ Width X “w X 13.75” Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
Some of the best features aren’t readily apparent, but you will appreciate the benefits over the period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
Rocky Mountain Goods Air Return Grille – Heavy Duty Steel with Premium Finish – Includes Full Installation kit – Louvered Design – Paintable Vent Cover – Matte White – Consistent air Flow (10" x 6")
Rocky Mountain Goods Air Return Grille is a heavy duty premium designed wall vent cover made to last the life of your house. With the complete installation kit, this air return register can be easily installed in seconds. For knowing the correct size we recommend measuring your duct and selecting the air return grille with the matching measurements. The attractive louvered design also ensures more consistent airflow throughout your house. The matte design is a premium finish but can also be used to paint if a different color is desired. Rocky Mountain Goods Air Return Grille comes with a lifetime warranty.
12"w X 8"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 13.75"w X 9.75"h]
- 12″w X 8″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 13.75″ Width X “w X 9.75” Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
- Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Easy Unrestricted Air Flow For Your HVAC System – 50° angled to provide maximum airflow
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
12″w X 8″h Steel Return Air Grilles – Sidewall and Cieling – HVAC DUCT COVER – White
12″w X 8″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 13.75″ Width X “w X 9.75” Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
Some of the best features aren’t readily apparent, but you will appreciate the benefits over the period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
30" X 6" Baseboard Return Air Grille – HVAC Vent Duct Cover – 7/8" Margin Turnback for Flush Fit with Baseboard Work – White
- 30″w X 6″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 31.5″ Width X 7.5″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
- Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Smooth Surface Edges – Run Your Fingers Across The Surface To Feel The Smoothness
- Easy Unrestricted Air Flow For Your HVAC System – 7/8″ margin turnback
30″ X 6″ Baseboard Return Air Grille – HVAC Vent Duct Cover – 7/8″ Margin Turnback For Flush Fit With Baseboard Work – White
30″w X 6″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 31.5″ Width X 7.5″ Height – SEE BELOW IN DESCRIPTION How To Measure A Grille
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Rigid Gauge Steel. Rigid gauge built for durability and long life in mind, but still light and handy.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.5″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
16" X 20" Steel Return Air Filter Grille by HANDUA | Removable Face Door HVAC Duct Cover Grill for 1-inch Filter, White | Outer Dimensions: 18.5"W X 22.5"H
- Always measure the wall opening to determine which size you should order. Wall Opening Size = Listed Grille Size. If the hole on the wall is 16″(W)x20″(H) please order a 16″x20″ grille.
- Handua Return Air Filter Grille used for sidewall or ceiling openings. Our Return Air Filter Grills do not require screwdriver to open, you can easily open the latch with a finger move.
- The door/face is removable for easy filter change and cleaning, this Grill uses a 1″ thick filter (not included).
- Using our Return Air Filter Grille within your ventilation system will improve your home circulation. The steel is stamped so there is no sharp edges.
- Durable white powder coated, high quality steel removable face allows easy access to replace air filter.
Return Air Filter Grille for 16″x20″ Duct Opening, White, Steel
* 1/3″spaced fins set at 20 degrees.
* Effectively conceals filter.
* Use standard 1″ thick disposable filters (not included).
* Removable face for easy installation and cleaning.
* Equipped with adjustable filter retainers.
* Primary use: Side wall and ceiling.
* Screws are included with the system, standard.
* All-steel construction.
* Durable white powder coated.
* Standard color is white (Ral9016).
How To Measure A Grille
Always measure the size of the duct opening (the “hole” in the duct/wall). Do not measure the entire size of the register itself. Each grille has a front face frame, that will overlay at wall joint. Entire outer size of the grille is; listed size +2.5-inch.
Understanding Width & Height
In a grille size, the first number always represents the width and the second one is the height. As an Example: If the hole on your wall/duct is 16″ wide by 20″ tall, order a 16×20. If the hole is 20″ wide by 16″ tall, order an 20×16.
For this particular product you’re viewing at the moment, the hole on your wall/duct opening should be 16″Wx20″H.
Click the ‘Add To Cart’ button now to order your Return Air Filter Grille!
Similar items with 4 stars and above
8" x 32" Return Air Grille – Sidewall and Ceiling – HVAC Vent Duct Cover Diffuser – [White] [Outer Dimensions: 9.75w X 33.75"h]
- 8″w X 32″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 9.75″ Width X 33.75″ Height – SEE IN DESCRIPTION HOW TO MEASURE A GRILLE PROPERLY
- High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
- Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Easy Unrestricted Air Flow For Your HVAC System – 50° angled to provide maximum airflow
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
8″ x 32″ Return Air Grille – Sidewall and Cieling – HVAC Vent Duct Cover Diffuser – [White]
8″w X 32″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 9.75″ Width X 33.75″ Height – SEE IN DESCRIPTION HOW TO MEASURE A GRILLE PROPERLY
Why HVAC Premium?
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
With HVAC Premium you get an extra measure of quality that will be visible to your family members and house guests.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Heavy Gauge Steel. Heavier gauge than needed, built for durability and long life in mind, but still light and handy.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% Money Back Guarantee, no questions asked. Click Add to Cart now & enjoy a new updated refreshing look of your room.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found heating return air vent for you.Please don’t forget to share your experience by comment in this post. Thank you!
