gadfurniture 
Nowadays, there are so many products of t962a reflow oven in the market and you are wondering to choose a best one. You have searched for t962a reflow oven in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings t962a reflow oven which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Happybuy Reflow Soldering Machine T962A Reflow Oven1500W 300 x 320 mm Infrared Heater Soldering Machine Automatic (T962A)
- Power: 1500W
- Soldering area: 300 x 320 mm.
- Temperature Range: 100℃ – 350℃
- Cycle Time: 1～8 min.
- This reflow oven can solder single and double PCB panels with all kinds of encapsulation form.
- The reflow soldering machine is a microcomputer automatic control, the whole welding process from pre heating, soaking, reflux to cooling is automatically completed.
- Memory eight kinds of temperature parameter waves of the reflow soldering machine can be provided as choice, and establish to move heating and cool off function compulsory.
SMTHouse T962A Reflow Oven Infrared IC Heater Soldering Machine 1500W 300 x 320 mm SMD SMT BGA Soldering Automatic
- 【WIED SOLDERING AREA】: Infrared reflow oven model: T962A
- Rated power: 1500W
- Effective Soldering max area: 12 x 13 inch
- 【WIED SOLDERING AREA】: Infrared reflow oven model: T962A
- Rated power: 1500W
- Effective Soldering max area: 12 x 13 inch
- 【AUTOMATIC SOLDERING PROCESS】: Parameters of eight soldering cycles are predefined and the entire soldering process can completed automatically from Preheat, soak and reflow through to cool down.Uses up to 1500 Watts of energy efficient Infrared heating and air circulation to re-flow solder
- 【LIGHT WEIGHT&PORTABLE】: Good build quality but at the same time light weight and a small footprint allows the T962A to be easily bench positioned transported or stored
- 【EXTENSIVE USE】: The T962A can solder most boss-eyed or double-face PCB boards small parts, for example CHIP, SOP, PLCC, QFP, BGA etc. It is the ideal rework solution from single runs to on-demand small batch production
Infrared Reflow Oven T962A Reflow Soldering Machine 1500W Infrared IC Heater Reflow Oven Machine 12 x 13 Inch
Introduction:
The Infrared IC Heater T-962A is a micro processor controlled reflow-oven. It can be used for effectively soldering various SMD and BGA components. The whole soldering process can be completed automatically and it is very easy to use. This machine uses a powerful infrared emission and circulation of the hot air flow, so the temperature is being kept very accurate and evenly distributed.
Advantages:
1.A large infrared soldering area
2.Choice of different soldering cycles
3.Special heat up and temperature equalization with all designs
4.Ergonomic design, practical and easily operated
5.Large number of available functions
Daily maintenance:
1.Always keeps the drawer clean.
2.Clean the observation window of the drawer periodically.
Item Specification:
Certification: CE
Infrared reflow oven model: T962A
Rated power: 1500W
Effective Soldering max area: 12 x 13 inch
Power supply:AC110V/ 50Hz
Temperature Range:0℃-280℃
Cycle Time:1～8 min
Rated Duty Cycle: 100%
Attention:
1.After use, don’t switch off the power instantly. Make sure the machine is cooling down sufficiently before switching off.
2. Make sure to place the machine in a very well ventilated area.
3.Disconnect the machine from the mains when not in use for long periods.
4.Do not open or dismantle the casing of the machine.
P.S:Specific instructions please refer to the manual ,thank you!
Package Content
1 X Main Heater Infrared Oven
1 X Power Cord
1 X English Manual
Happybuy Reflow Oven T962A+ 110V Reflow Soldering Machine 2300W 370 x 450 mm Professional Infrared Heater Soldering Machine Automatic Reflow Machine (T962A+ 110V)
- 【WIDE WELDING AREA】 Power: 2300W
- Soldering area: 370 x 450 mm.
- 【EASY TO USE】 Soldering Oven can be connected to PC, by installing a software, you can easily edit, transmit, read, analyze, and save waves, make operations more convenient. It can display real-time temperature change, easy to read.
- 【AUTOMATIC SOLDERING PROCESS】 The reflow soldering machine is a microcomputer automatic control, the whole welding process from pre heating, soaking, reflux to cooling is automatically completed.
- 【MULTIFUNCTIONAL】 This reflow oven can solder single and double PCB panels with all kinds of encapsulation form.
- 【INTELLIGENT CONTROL】 Reflow Machine has intelligent temperature test & control system, accurate and with temperature compensation function to suit more working environment.
Happybuy T962 Reflow Oven Infrared IC Heater Soldering Machine 800W 180 x 235 mm SMD SMT BGA Soldering Automatic (180 x 235 mm)
- 【WIED SOLDERING AREA】: Infrared reflow oven model: T962
- Rated power: 800W
- Effective Soldering max area: 7 x 9 inch
- 【HIGH EFFICIENCY】: Reflow soldering machine power supply:AC110V/ 50Hz
- Temperature Range:0℃-280℃
- Cycle Time:1～8 min
- Rated Duty Cycle: 100%
- Certification: CE
- 【AUTOMATIC SOLDERING PROCESS】: Parameters of eight soldering cycles are predefined and the entire soldering process can completed automatically from Preheat, soak and reflow through to cool down.Uses up to 800 Watts of energy efficient Infrared heating and air circulation to re-flow solder
- 【LIGHT WEIGHT&PORTABLE】: Good build quality but at the same time light weight and a small footprint allows the T962 to be easily bench positioned transported or stored
- 【EXTENSIVE USE】: T962 to be easily bench positioned transported or stored The T962 can solder most boss-eyed or double-face PCB boards small parts, for example CHIP, SOP, PLCC, QFP, BGA etc. It is the ideal rework solution from single runs to on-demand small batch production
Infrared Reflow Oven T962 Reflow Soldering Machine 800W Infrared IC Heater Reflow Oven Machine 7 x 9 Inch
Introduction:
The Infrared IC Heater T-962 is a micro processor controlled reflow-oven. It can be used for effectively soldering various SMD and BGA components. The whole soldering process can be completed automatically and it is very easy to use. This machine uses a powerful infrared emission and circulation of the hot air flow, so the temperature is being kept very accurate and evenly distributed.
Advantages:
1.A large infrared soldering area
2.Choice of different soldering cycles
3.Special heat up and temperature equalization with all designs
4.Ergonomic design, practical and easily operated
5.Large number of available functions
Daily maintenance:
1.Always keeps the drawer clean.
2.Clean the observation window of the drawer periodically.
Item Specification:
Certification: CE
Infrared reflow oven model: T962
Rated power: 800W
Effective Soldering max area: 7 x 9 inch
Power supply:AC110V/ 50Hz
Temperature Range:0℃-280℃
Cycle Time:1～8 min
Rated Duty Cycle: 100%
Attention:
1.After use, don’t switch off the power instantly. Make sure the machine is cooling down sufficiently before switching off.
2. Make sure to place the machine in a very well ventilated area.
3.Disconnect the machine from the mains when not in use for long periods.
4.Do not open or dismantle the casing of the machine.
P.S:Specific instructions please refer to the manual ,thank you!
Package Content
1 X Main Heater Infrared Oven
1 X Power Cord
1 X English Manual
Happybuy Reflow Oven T960E 110V Reflow Soldering Machine 4500W 300 x 1200 mm Professional Infrared Heater Soldering Machine Automatic Reflow Machine (T960E 110V)
- 【WIDE SOLDERING AREA】- This Soldering Oven, an integrated device, with soldering area of 300*1200mm(11.8″*47.2″), allowing it to work under different working condition.
- 【EFFECTIVE TEMPERATURE CONTROL】- Adopting rapid infrared heating type and PID closed-loop control. Equipped with upper 3/down 2 heating zone and heating zone length of 960mm(37.8″). The temperature can be heat up from room temperature to 350℃ in 15min, and the temperature control accuracy is ±1℃.
- 【STABLE TRANSMISSION SYSTEM】- Adopting independent wheel structure, with speed precision of ±10mm/min. A 1:150 imported turbine reducer is equipped, with adjustable speed range of 0-1500mm/min(59″/min).
- 【CONVENIENT CONTROL】- This Reflow Machine, the data of speed, time and temperature are integrated into one LED display for convenient and intuitive observation. The outside-load operation panel avoids the high temperature in the panel, ensuring the stability and safety.
- 【PROFESSIONAL USE】- Suitable for LED new light source, medium and batch uninterrupted welding of BGA components. Adopt intelligent curve heating mode, equipped with 8 curves to meet different welding processes. With programmable control technology and preset curve memory storage function. Thermocouple temperature measurement and compensation circuit are included for more accurate measurement.
Similar items with 4 stars and above
QS-5100 Drawer Type Lead Free Reflow Soldering Machine (110V)
- QS-5100 is the latest development of a reflow used in electronic products, maintenance of SMT technology and convenient type of back to welding equipment.The product uses infrared heating elements and temperature sensing components.The precise control through the microcomputer, so that reflow temperature control curve in full compliance with SMT reflow manufacturing process requirements, ‘temperature curve’ precision is adjustable to meet the requirements of different material parameters of the
- A total of two sets of machine operating parameters to choose from, namely the ‘reflow’ and ‘maintenance.’ ‘Reflow’ is a circuit board for soldering components designed to run the whole process has heating, insulation, (set of welding) temperature and cooling
- ‘maintenance’ is a response to the demolition of the circuit board components, and designed to run the course of a heating and insulation, and ‘reflow’ less than a month cooling process.
- 1.SMT technology and convenient type of back to welding equipment. 2.Uses infrared heating elements and temperature sensing components. 3.Microcomputer control.
- 4.Temperature curve` precision is adjustable to meet the requirements of different material parameters of the solder paste.
- 5.Voltage requirement: 110 volt.
QS-5100 Reflow Soldering Machine Description: QS-5100 is the latest development of a reflow used in electronic products, maintenance of SMT technology and convenient type of back to welding equipment.The product uses infrared heating elements and temperature sensing components.The precise control through the microcomputer, so that reflow temperature control curve in full compliance with SMT reflow manufacturing process requirements, ‘temperature curve’ precision is adjustable to meet the requirements of different material parameters of the solder paste.Through the ‘Settings’ feature makes a return to welding equipment, maintenance, drying and other features. A total of two sets of machine operating parameters to choose from, namely the ‘reflow’ and ‘maintenance.’ ‘Reflow’ is a circuit board for soldering components designed to run the whole process has heating, insulation, (set of welding) temperature and cooling; ‘maintenance’ is a response to the demolition of the circuit board components, and designed to run the course of a heating and insulation, and ‘reflow’ less than a month cooling process.
Happybuy Reflow Oven T937M 110V Reflow Soldering Machine 3300W 350 x 400 mm Professional Infrared Heater Soldering Machine Automatic Reflow Machine (T937M 110V)
- 【WIDE WELDING AREA】 Power: 3300W
- Soldering area: 315 x 375 mm.
- 【EASY TO USE】 This Soldering Oven can be connected to PC, by installing a software, you can easily edit, transmit, read, analyze, and save waves, make operations more convenient. It can display real-time temperature change, easy to and support wave print function for further research.
- 【SEPARATED GAS EXHAUST TUBE】Separated gas exhaust tube, more safe on use. Also with strong heat dissipation fan, imported German aluminum alloy material.
- 【AUTOMATIC】 Entire soldering process is automatic, from preheat, soak, reflow to cool down.
- 【INTELLIGENT CONTROL】 This Reflow Machine has intelligent temperature test & control system, accurate and with temperature compensation function to suit more working environment.
Popsport Infrared Reflow Oven T962C Reflow Soldering Machine 2800W 16 x 24 Inch Infrared IC Heater Reflow Oven Machine for Soldering Various SMD and BGA Components
- Infrared reflow oven model: T962C
- Rated power: 2800W
- Effective Soldering max area: 16 x 24 inch
- Reflow soldering machine power supply:AC110V/ 50Hz
- Temperature Range:0℃-280℃
- Cycle Time:1～8 min
- Rated Duty Cycle: 100%
- Certification: CE
- Parameters of eight soldering cycles are predefined and the entire soldering process can completed automatically from Preheat, soak and reflow through to cool down.Uses up to 2800 Watts of energy efficient Infrared heating and air circulation to re-flow solder
- Good build quality but at the same time light weight and a small footprint allows the T962C to be easily bench positioned transported or stored
- The T962C can solder most boss-eyed or double-face PCB boards small parts, for example CHIP, SOP, PLCC, QFP, BGA etc. It is the ideal rework solution from single runs to on-demand small batch production
Infrared Reflow Oven T962C Reflow Soldering Machine 2800W 16 x 24 Inch Infrared IC Heater Reflow Oven Machine
Introduction:
The Infrared IC Heater T-962C is a micro processor controlled reflow-oven. It can be used for effectively soldering various SMD and BGA components. The whole soldering process can be completed automatically and it is very easy to use. This machine uses a powerful infrared emission and circulation of the hot air flow, so the temperature is being kept very accurate and evenly distributed.
Item Specification:
Certification: CE
Infrared reflow oven model: T962C
Rated power: 2800W
Effective Soldering max area: 16 x 24 inch
Power supply:AC110V/ 50Hz
Temperature Range:0℃-280℃
Cycle Time:1～8 min
Rated Duty Cycle: 100%
Advantages:
1.A large infrared soldering area
2.Choice of different soldering cycles
3.Special heat up and temperature equalization with all designs
4.Ergonomic design, practical and easily operated
5.Large number of available functions
Daily maintenance:
1.Always keeps the drawer clean.
2.Clean the observation window of the drawer periodically.
Attention:
1.After use, don’t switch off the power instantly. Make sure the machine is cooling down sufficiently before switching off.
2. Make sure to place the machine in a very well ventilated area.
3.Disconnect the machine from the mains when not in use for long periods.
4.Do not open or dismantle the casing of the machine.
P.S:Specific instructions please refer to the manual ,thank you!
Package Content
1 X Main Heater Infrared Oven
1 X Power Cord
1 X English Manual
Reflow Oven vinmax Professional Infrared SMD BGA IC Heater Reflow Oven 800W 79 Inch Rework Station
- This reflow oven machine is intellegiently controlled by microcomputer can store 8 different profiles.
- It has a visualable drawer design to hold the PCB in the heating chamber and with lcd display, it allows the soldering process autmatically finished under your eyes.
- Applied with a powerful infrared emission and circulation of the hot air flow, so the temperature is being kept very accurate and evenly distributed.
- re-Set heating Modes are selected by user interaction with thermal cycle progress observed on LCD display.It can satisfy a dissimilarity SMD/BAG Soldering a request on a PCB assembly.
- The T962 may be used to automatically ”re-flow” solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes.
Adoption fast infrared radiation and circulation the wind for heat, So the temperature is very Accurate and even.
Thermal cycle accuracy is maintained by closed loop micro-computer control with infrared heaters, thermocouple and circulating air.
The T962 is simple to use, the soldering process is completely automatic defined by pre-defined thermal cycles.
Features:
(1)A large infrared soldering area
Effective soldering area: 180*235mm; this increases the usage range of this machine drastically and makes it an economical investment.
(2) Choice of different soldering cycles
Parameters of eight soldering cycles are predefined and the entire soldering process can completed automatically from Preheat, Soak and Reflow through to cool down.
(3) Special heat up and temperature equalization with all designs
Uses up to 800 Watts of energy efficient Infrared heating and air circulation to re-flow solder.
(4) Ergonomic design, practical and easily operated
Good build quality but at the same time light weight and a small footprint allows the T962 to be easily bench positioned transported or stored.
(5) Large number of available functions
The T962 can solder most boss-eyed or double-face PCB boards small parts, for example CHIP, SOP, PLCC, QFP, BGA etc.
It is the ideal rework solution from single runs to on-demand small batch production.
Technical parameters:
Soldering area: 180*235mm
Overall dimensions: 31*29*17cm
Packing dimensions: 37.5*24*37.5cm
Power: 800W
Cycle time: 1-8 min
Voltage:AC110V/AC220V /50-60HZ
Net weight: 6.2Kgs
Package Content:
1×Main Heater Infrared Oven
1×Power Cord
1×English Manual
T-962 Reflow Oven Infrared IC Heater Soldering Machine 800 W 180 x 235 mm T962 for BGA SMD SMT Rework CE Certificate
- 1. Large infrared soldering area Effective soldering area: 180 x 235 mm
- 2. Multi temperature wave 8 temperature-parameter waves selectable
- with manual heating function, forced cooling function, etc.
- 3. Unique design of temperature rise and homoeothermy The cooperation of fast infrared heating with output work 800 W and homoeothermic fan makes the temperature accurate and even and the whole process automatic and accurate in accordance with the preset temperature wave. No need of extra control.
- 4. Comprehensive functions With functions of reflow soldering, drying, heat preservation, finalizing the design, fast cooling, etc. Capable of soldering single and double PCB panels with all kinds of encapsulation form such as CHIP, SOP, PLCC, QFP, BGA, etc
- Can be used for glue solidifying, circuit board thermal aging, PCB maintenance, etc
- 5. Power supply AC110V/ 50Hz AC220V /60Hz
Pattern Name:180 x 235 mm
T962 Infrared IC Heater Reflow Oven for SMD BGA Soldering
Description
Infrared IC Heater T962 is a micro-processor controlled reflow oven, works automatically by micro-computer control. It can satisfy a dissimilarity SMD、BAG soldering a request on a PCB assembly. It is used to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes. User interface is implemented by way of T962 input keys and an LCD display.
Feature
The T962 is a self-contained Micro-Processor controlled IC Heater and solder rework station.
Parameters of Eight (8) Soldering cycles are Pre-Defined
Complete visual operation by the high quality LCD screen. Soldering cycles are keypad selected and progress displayed on the LCD.
Adoption fast infrared radiation and circulation the wind for heat makes the temperature very accurate and even.
A single windowed drawer holds assemblies within the heating chamber
Thermal cycle accuracy is maintained by closed loop micro-computer control with infrared heaters, thermocouple and circulating air.
The entire soldering process is completes automatically from Preheat, Soak and Reflow through cool- down.
Can be used for the glue solidifying, circuit board thermal aging, PCB maintenance, etc;
Equipped with exhaust fan to satisfy the need of the soldering.
Technical Parameters
Model: T962
Power: 800W
Effective Soldering max area: 180 x 235mm
Process cycle: 1～8 min
Conclusion
By our suggestions above, we hope that you can found t962a reflow oven for you.Please don’t forget to share your experience by comment in this post. Thank you!
