gadfurniture 
Nowadays, there are so many products of throttle cable building kit in the market and you are wondering to choose a best one. You have searched for throttle cable building kit in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings throttle cable building kit which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
28,516 Reviews Scanned
Venhill VWK003-BK Universal Motorcycle Shop Multi Throttle Cable Kit
- High-quality, “build-your-own” kit suitable for building multiple throttle cables for generally any motorcycle application.
- This is a practical, durable kit for building multiple throttle cables for custom choppers, unique classics, show projects, or vintage race bikes
- The conduit is spiral wound steel covered with tough black PVC
- The inner liner is Teflon for smooth action and zero maintenance
- The wire is galvanized steel for long life and easy soldering.
High-quality, “build-your-own” kit suitable for building multiple throttle cables for generally any motorcycle application.
The wires will need to be cut to length and the required nipples soldered into place.
PLEASE NOTE: We strongly discourage the use of a propane type torch to heat and flow solder into the wire. This is likely to overheat the wire, causing it to become brittle and break. We recommend immersing the wire ends in a molten solder bath, such as that in a solder pot.
The ferrules and adjusters are a snug fit. They may be bonded into place if preferred, or you can use a center punch to make a small indention in the side.
The kit includes:
5 meters (15 feet) of Teflon lined 5mm OD black PVC coated, spiral wound conduit
5 meters (15 feet) of 1.5mm OD galvanized steel wire (7 x 7 strand)
10 ferrules, 1/4″ OD
20 ferrules, 5.5mm OD
20 ferrules, 5.5mm OD
1 mid-adjuster, 6mm x .75 x 20mm
5 brass barrel nipples, 5.75mm DIA x 5.5mm
20 brass carb nipples, 3mm DIA x 3mm
2 general use neoprene boots, 14mm ID
10 neoprene adjuster boots, 7mm ID
Venhill U01-4-101-BK Universal Motorcycle Throttle Cable Kit – 5mm OD
- High-quality, “build-your-own” cable kit suitable for general motorcycle throttle application
- This is a practical, durable kit for building your own throttle cables for a custom chopper, a unique classic, a show project, or a vintage race bike.
- The conduit is spiral wound steel covered with tough black PVC.
- The inner liner is Teflon for smooth action and zero maintenance.
- The wire is galvanized steel for long life and easy soldering.
High-quality, "build-your-own" cable kit suitable for general motorcycle throttle application
One end of the inner wire is fitted with a carb nipple (nominally 3mm dia x 3mm). The opposite end will need to be cut to length and the required nipple soldered into place.
PLEASE NOTE: DO NOT use a propane type torch to heat and flow solder into the wire. This is likely to overheat the wire, causing it to become brittle and break. We recommend immersing the wire ends in a molten solder bath, such as that in a solder pot.
The ferrules and adjusters are a snug fit. They may be bonded into place if preferred, or you can use a center punch to make a small indention in the side.
The Kit Includes:
1.35 meters (4.4 feet/4 feet 4.8 inches/52.8 inches) of 5mm OD black PVC coated, spiral wound, Teflon lined outer conduit
1.6 meters (5.2 feet/5 feet 3 inches/63 inches) of 1.5mm OD galvanized steel wire (7 x 7 strand)
3 ferrules, 5.5mm OD nose
3 ferrules, 6.3mm OD nose
1 6mm x .75 x 20mm mid-adjuster
1 6mm x 1.00 x 32mm adjuster screw with nut
2 neoprene adjuster boots
1 brass ball nipple, 5mm OD (1.6mm bore)
1 brass barrel nipple, 5mm DIA x 7.5mm (1.9mm bore)
1 brass barrel nipple, 6mm DIA x 4.2mm (1.7mm bore)
1 brass barrel nipple, 6mm DIA x 8mm (2.1mm bore)
1 brass barrel nipple, 6mm DIA x 9.5mm (2.1mm bore)
Pit Posse Universal Cable Emergency Repair Kit For Motorcycle Atv – Throttle Clutch Brake Cables Included –Compact – 9 Cable Ends
- ✅ NEVER GET STRANDED AGAIN- The emergency clutch cable repair kit is a must in your tool box. This kit is useful for temporary or permanent cable repairs at the track or on the road. This kit makes repairs possible for virtually any cable configuration in any situation and having this kit with you always guarantees your rides are smooth and you are prepared in case of a malfunction.
- ✅ COMPACT UNIVERSAL REPAIR KIT- The kit comes in a small tin case for easy and organized storage, small enough to easily have under your bike’s seat. The kit contains a clutch and a brake cable, and an assortment of 9 different cable ends that fits any cable configuration, making this kit universal.
- ✅ TOP NOTCH QUALITY & SAFETY- This kit is backed by a 20-year reputation for producing quality products that are meant to make your life easier and get you to safety while enjoying the ride. Tested and guaranteed to provide quality, durability, and usability. Stay safe with this immediate solution.
- ✅ GET BACK ON THE ROAD INSTANTLY- If you are unprepared on the road, you can find yourself stuck somewhere, faraway from a helping hand. Don’t waste time being stuck in an uncomfortable and even dangerous situation, be prepared with Pit Posse’s emergency cable repair kit. Don’t say it won’t happen to me. Carry this useful kit with you for every ride.
- ✅ YOUR SATISFACTION IS OUR #1 PRIORITY- This kit is a must have if you have any cable operated vehicles like motorcycles, ATV’s, or golf carts. Pit Posse guarantees your satisfaction with this product, If you’re not 100% satisfied, we will give you a full refund or a free exchange no questions asked. We have a 30-day warranty policy. Contact us directly and we will gladly assist.
Pit Posse’s pocket-sized Cable Repair Kit is a must have for a prepared motorcyclist.
Whether off-roading, touring or fixing your buddy’s bike, it is an essential kit for those unexpected moments.
We set our standards higher than the rest with our 20 years of experience, bringing you the smartest most creative tools in the field.
The universal cable repair kit contains:
- Two Stainless steel cables
- 2.0m length clutch cable (1.25mm dia.)
- 2.0m length brake cable (1.55mm dia.)
- Sturdy and compact carry case
- Assortment of 9 different cable ends
Never get stranded again because of a cable malfunction.
ADD TO CART AND BE PREPARED WITH PIT POSSE’S CABLE REPAIR KIT
Venhill U01-4-150-BK Universal Motorcycle Dual Throttle Cable Kit
- High-quality, “build-your-own” cable kit suitable for generally any motorcycle throttle application with a “push-pull” style, two cable throttle.
- This is a practical, durable kit for building your own throttle cables for a custom chopper, a unique classic, a show project, or a vintage race bike.
- The conduit is spiral wound steel covered with tough black PVC.
- The inner liner is Teflon for smooth action and zero maintenance.
- The wire is galvanized steel for long life and easy soldering.
High-quality, “build-your-own” cable kit suitable for generally any motorcycle throttle application with a push-pull style throttle.
The ends of the inner wires are fitted with a 6mm dia x 5mm nipple. The opposite end will need to be cut to length and the required nipple soldered into place.
PLEASE NOTE: We strongly discourage the use of a propane type torch to heat and flow solder into the wire. This is likely to overheat the wire, causing it to become brittle. We recommend dipping the wire ends in a solder bath, such as that in a solder pot.
The ferrules are a snug fit. They may be bonded into place, or use a center punch to make a small indention in the side.
The throttle kit includes:
2 x 1.35 meters (4.4 feet/54.8 inches) of 6mm OD black PVC coated, spiral wound, Teflon lined outer conduit
2 x 2 meters (6.5 feet/78 inches) of 1.5mm OD galvanized steel wire (7 x 7 strand)
1 2-piece plastic angled wire guide
1 ferrule bend with swivel nut, throttle open, “Honda”
1 ferrule bend with swivel nut, throttle close, “Honda”
1 ferrule bend with mounting tab, throttle open, “Suzuki”
1 ferrule bend with swivel nut, throttle close, “Suzuki”
2 ferrule bends, zinc coated
2 ferrules, 5mm OD nose
2 ferrules, 6.5mm OD nose
2 ferrules, 5.5mm OD nose with groove
2 6mm x 1.00 x 25mm adjusters
1 tapered double boot
4 adjuster boots
2 brass barrel nipples, 6mm DIA x 10mm (2.1mm bore)
2 brass barrel nipples, 6mm DIA x 8mm (2.1mm bore)
2 solderless barrel nipples, 6mm DIA x 8mm
2 solderless barrel nipples, 5mm DIA x 7.5mm
2 tab washers
Venhill U01-4-125-BK Universal Split Dual Throttle Motorcycle Cable Kit with Junction
- High-quality, “build-your-own” cable kit suitable for generally any motorcycle throttle application where the cable connects to the grip and then splits to actuate two carburettors or throttle bodies.
- This is a practical, durable kit for building your own throttle cables for a custom chopper, a unique classic, a show project, or a vintage race bike.
- The conduit is spiral wound steel covered with tough black PVC.
- The inner liner is Teflon™ for smooth action and zero maintenance.
- The wire is galvanized steel for long life and easy soldering.
High-quality, "build-your-own" cable kit
The wires will need to be cut to length and the required nipples soldered into place.
PLEASE NOTE: We strongly discourage the use of a propane type torch to heat and flow solder into the wire. This is likely to overheat the wire, causing it to become brittle and break. We recommend immersing the wire ends in a molten solder bath, such as that in a solder pot.
The ferrules and adjusters are a snug fit. They may be bonded or use a center punch to make a small indention in the side.
The Kit Includes:
Upper/grip conduit is 1.5 meters (4.9 feet/4 feet 11 inches/59 inches) of 5mm OD black PVC coated, spiral wound, Teflon lined outer conduit
Upper/grip wire is 1.75 meters (5.75 feet/5 feet 9 inches/69 inches) of 1.5mm OD galvanized steel wire (7 x 7 strand)
Lower/engine conduit is 0.5 meters (1.64 feet/1 foot 7.7 inches/19.7 inches) of 5mm OD black PVC coated, spiral wound, Teflon lined outer conduit
4 ferrules, 5.5mm OD
4 ferrules, 5mm OD
4 ferrules, 7mm OD
1 throttle grip adjuster screw with nut, M10 x 1.25 x 22mm
1 alloy adjuster screw with nut, M8 x 1.25 x 25mm
2 steel adjuster screws with nuts, M6 x 0.75 x 15mm
2 steel adjuster screws with nuts, M6 x 0.75 x 15mm
3 brass barrel nipples, 6mm DIA x 4.2mm (1.7mm bore)
3 brass barrel nipples, 5mm DIA x 7.5mm (1.9mm bore)
3 brass barrel nipples, 5.75mm DIA x 5.5mm (1.9mm bore)
1 brass ball nipple, 5mm DIA
1 brass ball nipple, 6mm DIA
1 tapered neoprene boot, 10mm > 4.5mm ID
4 neoprene boots, 7mm ID
1 splitter assembly, 48mm travel
Venhill VWK002-BK Universal Motorcycle Shop Multi Clutch Cable Kit
- High-quality, “build-your-own” kit suitable for building multiple throttle cables for generally any motorcycle application.
- This is a practical, durable kit for building multiple throttle cables for custom choppers, unique classics, show projects, or vintage race bikes
- The conduit is spiral wound steel covered with tough black PVC
- The inner liner is Teflon for smooth action and zero maintenance
- The wire is galvanized steel for long life and easy soldering.
High-quality, “build-your-own” kit suitable for building multiple throttle cables for generally any motorcycle application.
The wires will need to be cut to length and the required nipples soldered into place.
PLEASE NOTE: We strongly discourage the use of a propane type torch to heat and flow solder into the wire. This is likely to overheat the wire, causing it to become brittle and break. We recommend immersing the wire ends in a molten solder bath, such as that in a solder pot.
The ferrules and adjusters are a snug fit. They may be bonded into place if preferred, or you can use a center punch to make a small indention in the side.
The Kit Includes:
5 meters (15 feet) of Teflon lined 7mm OD black PVC coated, spiral wound conduit
5 meters (15 feet) of 2mm OD galvanized steel wire (1 x 19 strand)
5 ferrules, 8mm OD nose
5 ferrules, 6.5mm OD nose
5 ferrules, 7mm OD nose
1 mid-adjuster, 6mm x 1.25 x 32mm
5 brass barrel nipples, 8mm DIA x 9mm
5 brass barrel nipples, 6mm OD x 10mm
10 brass trumpet nipples, 6mm big end, 3.5mm small end, 9.5mm long, 2.5mm ID
5 general use neoprene boots
Venhill U01-4-100-BK Universal Motorcycle Throttle Cable Kit – 6mm OD
- High-quality, “build-your-own” cable kit suitable for generally any motorcycle throttle application
- This is a practical, durable kit for building your own throttle cables for a custom chopper, a unique classic, a show project, or a vintage race bike.
- The conduit is spiral wound steel covered with tough black PVC.
- The inner liner is Teflon for smooth action and zero maintenance.
- The wire is galvanized steel for long life and easy soldering.
High-quality, "build-your-own" cable kit suitable for generally any motorcycle throttle application
One end of the inner wire is fitted with a carb nipple (nominally 3mm dia x 3mm). The opposite end will need to be cut to length and the required nipple soldered into place.
PLEASE NOTE: We strongly discourage the use of a propane type torch to heat and flow solder into the wire. This is likely to overheat the wire, causing it to become brittle and break. We recommend immersing the wire ends in a molten solder bath, such as that in a solder pot.
The ferrules and adjusters are a snug fit. They may be bonded into place if preferred, or you can use a center punch to make a small indention in the side.
The Kit Includes:
1.35 meters (4.4 feet/4 feet 4.8 inches/52.8 inches) of 6mm OD black PVC coated, spiral wound, Teflon lined outer conduit
1.6 meters (5.2 feet/5 feet 3 inches/63 inches) of 1.5mm OD galvanized steel wire (7 x 7 strand)
2 ferrules, 5mm OD nose
2 ferrules, 6.5mm OD nose
1 6mm x 1.00 x 32mm mid-adjuster
1 6mm x 1.00 x 32mm adjuster screw with nut
2 neoprene adjuster boots
1 brass carburettor nipple, 3mm DIA x 3mm (1.9mm bore)
1 brass barrel nipple, 5mm DIA x 7.5mm (1.9mm bore)
1 brass barrel nipple, 5.75mm DIA x 5.5mm (1.4mm bore)
1 brass barrel nipple, 6mm DIA x 4.2mm (1.7mm bore)
1 brass barrel nipple, 6mm DIA x 8mm (2.1mm bore)
1 brass barrel nipple, 6mm DIA x 10mm (2.1mm bore)
Vernier Cable 15 ft.
Total Control & Push-Button Release
- Push-button for quick-release
- Plastic housing cannot be effected by oil, water or acid
- Choice of 15′, 25′, 30′ and 35′ lengths
CISNO Twist Throttle Handle Grip + Cable for Dirt Bike Quad ATV Pit 50cc 125cc 150 250
- throttle cable for monster moto
- Easy to install, used in almost any bikes applications
- Throttle Clamp made of aluminium alloys
- Cable length Approx. 120cm
- It fit 7/8″ or 22mm bar for most Chinese 50cc, 90cc, 110cc 125cc & 140cc 4-stroke dirt bike, mini bike, pocket bike.
Description:
Brand New
This replacement set include Throttle Cable, Throttle Clamp and Hand Grips.
Easy to install, used in almost any bikes applications
Throttle Clamp made of aluminium alloys
Throttle Cable length Approx. 120cm
It fit 7/8″ or 22mm bar for most Chinese 50cc, 90cc, 110cc 125cc & 140cc 4-stroke dirt bike, mini bike, pocket bike.
Please check pictures for more details.
Specification:
Color:Black
Weight: Approx 240g/ set
Package include:
1 pair Handle Grips
1x Throttle Clamp
1x Throttle Cable
CDHPOWER Throttle Handle, Kill Switch with Metal Pin and Throttle Cable 80cc Gas Motorized Bicycle
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy throttle cable building kit, eg:
- What are Top 10 throttle cable building kit for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 throttle cable building kit to buy?
- What are Top Rated throttle cable building kit to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) throttle cable building kit?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for throttle cable building kit.
- Before deciding to buy any throttle cable building kit, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose throttle cable building kit and What you should consider when buying the throttle cable building kit and Where to Buy or Purchase the throttle cable building kit. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 throttle cable building kit of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about throttle cable building kit.
Conclusion
By our suggestions above, we hope that you can found throttle cable building kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
