gadfurniture 
Nowadays, there are so many products of replacement extractor blade for ninja bl687c0 in the market and you are wondering to choose a best one. You have searched for replacement extractor blade for ninja bl687c0 in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings replacement extractor blade for ninja bl687c0 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
14,156 Reviews Scanned
Ninja Pro Extractor Blades Assembly for BL642 Blender DUO with Auto-iQ Replacement ( 7 Fin )
Ninja Blade Apply to BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012,Please confirm your blender need 7 fins replacement blade before purchasing
Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640
- 【Ninja Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【Nutri Ninja Replacement Parts】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【100% SATISFACTION GUARANTEE】 If you are buying before or after purchase any questions, please feel free to contact us, we’ll issue you a full refund or replacement.
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Replacement Extractor Blade for Nutri Ninja，Premium Bottom Blade for 1000W/1500W Ninja Auto iQ BL482 BL642 BL682 Blenders, Blender Spare Parts and Accessories, Auto iQ 7 Fins Blade Assembly
- ★★★★★ Good replacement part for blender, make your juicer reuse again and perfect for all your blending and mixing needs
- ★★★★★ 7 fins bottom stainless steel blade, brings qualified anti-corrosion performance
- ★★★★★ BPA Free, effortlessly pulverizes fruits, vegetables, and shakes into a delicious, smooth texture
- ★★★★★ Great replacement, easy to change, perfectly fit for your blender/juicer.
- ★★★★★ Suitable for BL2012/BL2013/BL480/BL480D/BL481/BL482/BL486CO/BL487/BL487A/BL488W/BL490/BL491/BL492/BL492W/BL640/BL641/BL642/BL642W/BL642Z/BL680A/BL682/NN100A/NN101/NN102
Features:
Good replacement part for blender, make your juicer reuse again and perfect for all your blending and mixing needs. 7 fins bottom stainless steel blade, brings qualified anti-corrosion performance. BPA Free, effortlessly pulverizes fruits, vegetables, and shakes into a delicious, smooth texture. Great replacement, easy to change, perfectly fit for your blender/juicer. Suitable for BL2012/BL2013/BL480/BL480D/BL481/BL482/BL486CO/BL487/BL487A/BL488W/BL490/BL491/BL492/BL492W/BL640/BL641/BL642/BL642W/BL642Z/BL680A/BL682/NN100A/NN101/NN102.
Specification:
Condiiton: 100% Brand New
Material: Plastic + Metal
Color: Black
Applicable Model: For BL2012/BL2013/BL480/BL480D/BL481/BL482/BL486CO/BL487/BL487A/BL488W/BL490/BL491/BL492/BL492W/BL640/BL641/BL642/BL642W/BL642Z/BL680A/BL682/NN100A/NN101/NN102
Product Size: Approx. 10 * 8cm / 3.9 * 3.1inch
Package Weight: Approx. 214g
Package Included:
1 * Juicer Bottom Blade
Replacement Blade with 7 Fins Gear on Bottom of Blade Assembly for 900W/1000W Nutri Ninja Blender BL2012/BL2013/BL450/BL480/BL480D/481/482/486/487/487A/488W/490/491/492/492W/640/642 (Not6 Fin Gear)
- Warning：You should be rest the blade when you use by long time! Intermittent use can ensure blade use lift!
- 6fins blade and 7 Fins motor Gear – 4″/10CM Diameter – Compatible with L2012, BL2013, BL480, BL481, BL482, BL486CO, BL487, BL488W, BL490, BL491, BL492, BL640, BL641, BL642, BL680A, BL682, NN100, NN101, NN102
- Packing Includes 1 x 6blade and 7 Fins Bottom Gear Assembly, 1 x Gasket Rubber.
- BPA Free, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- It Should Be 7 fin Moter Gear as picture .noted: this blade Not fit modle below:Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70
Best Accessories Nutri Ninja Blander Replacement Parts – Nutri Ninja Pro Extractor Blades Assembly The Pro Extractor Blades Assembly is compatible with Tritan Nutri Ninja cups, Stainless Steel Nutri Ninja Cups and the XL 48 oz. Multi-Serve Nutri Ninja Jar. Compatible with: nutri ninja model Nutri Ninja Pro BL450 Nutri Ninja Nutri Bowl DUO with Auto-iQ Boost – NN100/N100A/NN101 Nutri Ninja Ninja BlendMax DUO with Auto-iQ Boost – BL2012/BL2013 Nutri Ninja Auto-iQ -BL480/BL480D/BL490 Nutri Ninja Ninja Blender DUO with Auto-iQ BL640/641/BL642/BL642W/BL642Z This set are generic accessories, not original accessories Note: 1. The rubber garsket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber garsket and be sure it is put snugly into the bottom blade. 2. This bottom blade applies to many models, before purchasing, please check your machine, if it is 7 fins gear and 4inches, this will fit it.
Replacement Parts Ninja Bottom suitable for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (Black)
- ♠ Ninja Blade Apply to BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012,Please confirm your blender need 7 fins replacement blade before purchasing
- ♠Ninja Replacement Blade –7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel (Should you have any question about this item, feel free to contact us! )
- ♠Easy installation -It can be well loaded and easily removed. Just replace your bad blade and juicer can be reused.
- ♠Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade
- ♠Note2: Be careful of the blade when open the package
Color:Blade 7 Fins
Description:
Item Type: Ninja Blender Replacement Parts for blender
Blade material: stainless steel
Blade shape: Cross blade
＊This Ninja Blender Accessories Suit for:
BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
＊Not fit for :
BL660,BL663,BL740,BL770,BL771,BL773CO,BL780,BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
NOTE:
Two conditions must be met at the same time before purchase:
1: Your original motor base must be 7 fins;
2: Your blender model must identity with our stated model.
The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base:
There are too many models of ninja blender blade, if any character is difference, please don’t purchase it.
Note: You are recommended to replace your ninja blender every 6 months or as needed for optimal performance.
Pay attention to before use :
Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it.
Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding a leak)
Do not overfill! To avoid spilling, do not add ingredients past the Max fill line.
Place the replacement blade onto the cup and screw it tightly until you have a good seal.
Please make sure it in right place and locked tightly.
Do not run your blender over 4 minutes at a time to prevent overheating of the blender.
Packing including:
1 x Ninja blade Replacement
Blade 7 Fins Replacement Parts Ninja Bottom suitable for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade
- ♠ Ninja Blade Apply to BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012,Please confirm your blender need 7 fins replacement blade before purchasing
- ♠Ninja Replacement Blade –7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel (Should you have any question about this item, feel free to contact us! )
- ♠Easy installation -It can be well loaded and easily removed. Just replace your bad blade and juicer can be reused.
- ♠Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade
- ♠Note2: Be careful of the blade when open the package
Color:Blade 7 Fins
Description:
Item Type: Ninja Blender Replacement Parts for blender
Blade material: stainless steel
Blade shape: Cross blade
＊This Ninja Blender Accessories Suit for:
BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
＊Not fit for :
BL660,BL663,BL740,BL770,BL771,BL773CO,BL780,BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
NOTE:
Two conditions must be met at the same time before purchase:
1: Your original motor base must be 7 fins;
2: Your blender model must identity with our stated model.
The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base:
There are too many models of ninja blender blade, if any character is difference, please don’t purchase it.
Note: You are recommended to replace your ninja blender every 6 months or as needed for optimal performance.
Pay attention to before use :
Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it.
Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding a leak)
Do not overfill! To avoid spilling, do not add ingredients past the Max fill line.
Place the replacement blade onto the cup and screw it tightly until you have a good seal.
Please make sure it in right place and locked tightly.
Do not run your blender over 4 minutes at a time to prevent overheating of the blender.
Packing including:
1 x Ninja blade Replacement
1x Extra Gasket Rubber
DS-Space Ninja Replacement Bottom Blade, 7 Fins And 1 Gasket Replacement Blade for NutriNinja Auto iQ Bl482 Bl642 Nn102 Bl682 BL2013 Blender Assembly
- This blade is with 7 FINS. Check you blade before purchase please.
- 7 fins blade FITS for Nutri Ninja models: Pro BL450-30/BL456-30/BL451-30/BL454-30
- Auto-iQ BL480-30/BL480D-30/BL481-30/BL482-30/BL490-30/BL681A-30/BL682-30/BL642W/BL682
- Auto-iQ Pro Complete BL487-30/BL488W-30/BL487A-30
- Auto-iQ Compact System BL491-30/BL492-30/BL492W-30
- This blade DOESN’T FIT for models: BL66x, BL77x, BL8xx
- models # end with 70 (BL450-70, BL451-70, BL454-70, BL480-70, BL484-70, BL481-70, BL482-70, BL483-70), BL620C, BL660, BL663, BL682, BL201, BL610, NJ600, BL740, BL772, BL771, BL770, BL682, BL830, BL780, BL810 BL820 BL830
- High quality product!
Please check your blade model before buying. This blade with 7 FINS. It is DOESN’T fit with 6 fins. The list of compatible models you can find at the top of the page (near photos)
Ninja Blender System with Auto-IQ Technology, 72 oz. Replacement Pitcher
72 Oz / 9 cup pitcherbpa free , dishwasher safe works with bl640, bl641, bl642, bl642w, bl642z, bl680a, bl682please check the photo of the bottom of the pitcher to make sure it is compatible with your power base.
AxPower 7 Fins Extractor Blades Replacement Part Bottom Blade for Ninjia Blender for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 and More(2 Pack, 7 Fins)
- 【APPLY TO】The 7 fins extractor blade is suitable for Nutri Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup not fit for 16oz). Please make sure your Ninjia blender base has 7 fins before order.
- 【HIGH QUALITY】The high-speed blade is made of food-grade stainless steel, high hardness brings qualified anti-corrosion performance. Moreover, the outer is made of durable PP material, not easy to break and scrape.
- 【IMPORTANT NOTE】Note1: The rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【PACKAGE INCLUDED】 2 x 7 Fins Bottom Blade Replacements, 2 x Extra Gasket Rubbers and 1 x Cleaning Brush as a gift.
- 【BUY WITH CONFIDENCE】Thank you so much for your great support on us. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can.
Similar items with 4 stars and above
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy replacement extractor blade for ninja bl687c0, eg:
- What are Top 10 replacement extractor blade for ninja bl687c0 for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 replacement extractor blade for ninja bl687c0 to buy?
- What are Top Rated replacement extractor blade for ninja bl687c0 to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) replacement extractor blade for ninja bl687c0?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for replacement extractor blade for ninja bl687c0.
- Before deciding to buy any replacement extractor blade for ninja bl687c0, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose replacement extractor blade for ninja bl687c0 and What you should consider when buying the replacement extractor blade for ninja bl687c0 and Where to Buy or Purchase the replacement extractor blade for ninja bl687c0. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 replacement extractor blade for ninja bl687c0 of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about replacement extractor blade for ninja bl687c0.
Conclusion
By our suggestions above, we hope that you can found replacement extractor blade for ninja bl687c0 for you.Please don’t forget to share your experience by comment in this post. Thank you!
