Best Above Ground Water Filter Pump

Product Description

Keep your pool water safe and clean with INTEX Krystal Clear Sand Filter Pump. Sand Filters are one of the most popular ways to keep pool water clean. They can sometimes pick up a lot more of the small algae and dirt particles floating around in your pool. But not only is it effective, it saves on cost and time since the sand needs replacement just once every five years, not every two weeks like a filter cartridge pump. Sand Filters are easy to maintain and a great alternative to keep your pool water sanitized. This sand filter sports a six-function control valve which enables you to filter, backwash, rinse, recirculate, drain and close the system. It includes a 24-hr automatic timer to set the operating time and a safety shut-off to make pool maintenance much simpler. This pump has a flow rate of 3,000 gallons per hour, creating a system flow rate of 2,450 gallons per hour and making it a perfect fit for any size Intex above ground pool.

Amazon.com

28651EG Intex Krystal Clear 3000 GPH Sand Filter Pump. Keep your above ground pool water clean, soft, and refreshing with the Krystal Clear Sand Filter Pump by Intex. The all natural sand provides excellent water filtration as the 6-function control valve allows the pool owner to: filter, backwash and rinse, recirculate, drain and close the system. The built in 24-hour timer adds to the hassle-free experience with maintaining a cleaner pool. The strainer basket provides easy-cleaning, and prolongs the life of the sand. The Krystal Clear Sand Filter Pump generates a pump flow rate of 3,000 gallons per hour, ideal for above ground pools 16’ and above. This pump requires virtually no maintenance except replacement of sand every 5 years. Pump Flow Rate: 3,000 gph (11.3 m3/hr). System Flow Rate: 2,450 gph (9.2 m3/hr). Includes: 6-way Valve. Pressure Gauge. Heavy Duty Tank. Strainer Basket. Built-in Timer.

Keep your pool water Krystal Clear and refreshing this summer with the Intex 2,500 GPH Filter Cartridge Pump! Boasting a pump flow rate of 2,500 gallons per hour and a system flow rate of 1,900 gallons per hour, this pump will circulate and filter the water in your above ground pool to keep everything clean, refreshing, and fun. In addition, the maintenance for this pump is a breeze: just the occasional cartridge rinse or swap to keep this pump running strong. It uses Type B filter cartridges (Item #29005E) which should be changed every couple of weeks. This 2,500 GPH filter pump is the most powerful cartridge filter pump made by Intex, and is a must have for any above ground pool up to 24 feet in diameter, see for yourself! It can be used with any Intex above ground pools and features a built-in timer to set operating times for the ultimate in convenience.

Keep your above ground pool water clean, fresh, and sparkling with the Intex Krystal Clear Sand Filter Pump and Saltwater System. The all natural sand provides excellent water filtration as the 6 function control valve allows the pool owner to: filter, backwash and rinse, recirculate, drain and close the system. The built in 24 hour timer adds to the hassle free experience with maintaining a cleaner pool. The Krystal Clear Sand Filter Pump generates a pump flow rate of 1,600 gallons per hour, ideal for above ground pools. Equipped with the Ground Fault Circuit Interrupter, which is an added safety feature that shuts off the pump if electrical current is exposed to water. This economical and environmentally friendly pump requires virtually no maintenance except replacement of sand every 5 years. With the Saltwater System’s electrocatalytic oxidation process, water molecules are split into highly powerful oxidants which destroy organic contaminants such as bacteria and algae. The amount of natural chlorine generated by the saltwater system is reduced by approximately 60%, much less than other saltwater systems generate. The result is soft, fresh, clean water without the potential harsh side effects of packaged pool chemicals. The Saltwater System generates a pump flow rate of 1,600 gph and a system flow rate of 1,500 gph. Use with a maximum pool size of 8,500 gallons. This package includes a pair of Intex Plunger Valves so you can replace that part when the time comes. This assembly includes a plunger valve, hose o-ring, and step washer.

The Hayward PowerFlo LX is a high-performance pump series designed for the rigors of aboveground and on-ground type swimming pools. Combining durable, corrosion-proof construction with advanced features and options, it offers dependable performance and quiet operation. The advanced design reduces required maintenance to simple, common-sense procedures. Made of the high-strength PermaGlass XL material this pump has a clear cover to let you see when basket needs cleaning. An extra-large debris basket (118-cubic-inches) keeps pool maintenance to a minimum by extending time between cleanings. Rigid construction with load extender ribbing ensures free-flowing operation for heavy debris loads. The pump also offers 100-percent drip proof, heat-resistant double-sized seal for long motor life. It features a 1-1/2 inch intake and discharge, and a 6-foot power cord (120-volt). Hayward PowerFlo LX has self-lubricating motor bearings and shaft seals. No lubrication is necessary. The 60-cycle single-phase motor is rated for 1-1/2-horsepower (115-volts) and 20-amp circuit breakers. The pump motor is equipped with automatic thermal overload protection. The thermal overload will shut the motor off under abnormal conditions before damage to motor occurs. The motor will auto-restart when safer heat level is reached. For storage and winterizing your pump is important. Pump and motor must be protected from freezing. Shut off all electric power. Disconnect cord/electrical connections and plumbing connections. Drain thoroughly and clean out any debris. Store pump and motor in a dry, well-ventilated room.

Product Description

Titanium electrolytic cell uses environmentally friendly natural salt to create chlorine. Soft, fresh, clean water without the potential harsh side effects of packaged pool chemicals. Electro catalytic oxidation splits water molecules into highly powerful oxidants that destroy organic contaminants such as bacteria and algae. Redesigned sleek compact casing and control panel for easy use. Requires a pump with a flow rate between 700 and 3000 gph.

Manufacturer Contact Information

Intex consumer service team can be contacted at 800-234-6839 for troubleshooting and technical support.

Keep your pool water sparkling clean and safe this season with this Intex Saltwater System and Sand Filter Pump. These systems combine the ultimate in non-chemical water care. Sand filters have long been recognized by pool owners as one of the most desirable methods to keep pool water clear and sparkling. Not only does the all-natural and inexpensive sand do an excellent job of filtering particles out of the water, it needs replacement only once every five years, making sand filtration the simplest maintenance filtration option on the market. Intex Saltwater Systems are also desired by pool owners for their ability to keep pool water safe and clean, all while eliminating the harsh impacts of traditional packaged chlorine. Intex has now combined these two proven systems into one product, providing above-ground pool owners with one easy, low-cost and low-maintenance system. Both systems can be controlled by an automatic 24-hour timer to make operation carefree and easy, keep your pool safe, clean and comfortable for swimmers for years to come! Including several great tools, The INTEX Deluxe Maintenance Kit keeps your pool water looking crystal clear. Maintenance is a part of every swimming pool and getting the right tools for the job cuts down on time spent cleaning. Using your existing filter pump, the included vacuum sucks debris from the pool floor. The skimmer collects floating debris while the leaf rake is great for skimming anything that is missed. Easily brush algae and grime from pool walls with the wall brush and telescoping pole. A clean pool is a safe pool!

19″ Sand Filter Combo for above ground pools. Fully integrated sand filter, pump pressure valve, and stand. 4,500 gallons per hour pumping capacity. 175 pounds per hour sand pumping capacity. Just add the filter media and hook up the hoses, plug it in and it starts filtering immediately

Features:

• Pump and filter are perfectly engineered to provide optimum flow rates that promotes clean water quality
• Maximize flow and reduce noise while the energy efficient motor with commercial-grade frame
• Heavy-duty, high-performance motor with air-flow ventilation for quieter, cooler operation
• 5-Way multi port provides for easy use and quick to use
• Flow rate of 4,500 Gallons Per Hour swimming pool pump works swiftly and efficiently
• Pump strainer basket is the largest in its class with an easy open, quick lock, transparent pump lid which mean less work and more swimming
• Machine will protect users’s safety entirely with build-in automatic thermal overload protector
• Pump components are fiberglass-reinforced for superior strength and durability
• Self-priming pump with durable construction for all-weather

Specifications:

• Type: Sand Filter System
• Pool Type: Above Ground
• Filtration Area: 18,000 Gallons
• Drum Capacity: Holds up to 175lbs
• Valve Function: Filter, Backwash, Closed, Rinse and Waste
• Pump Power: 1.5HP
• Voltage: 115V/60Hz
• Flow Max: 4,500GPH
• Filter Media Included: No
• Inlet/Outlet Fitting: 1-1/2″NPT
• Max Temperature: 122F
• Certification: UL Listed
• Overall Dimension: 28-1/2″(W) x 21-1/2″(L) x 31-1/2″(H)

Package Contents:

• Sand Filter
• Pool Pump
• System Tray
• 5 Way Valve
• Hose Adapters

These pumps are capacitor start and not for use/sale in California

Conclusion

By our suggestions above, we hope that you can found above ground water filter pump for you.Please don’t forget to share your experience by comment in this post. Thank you!