gadfurniture 
Nowadays, there are so many products of pentek sediment water filter cartridge in the market and you are wondering to choose a best one. You have searched for pentek sediment water filter cartridge in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings pentek sediment water filter cartridge which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Pentek 155358, DGD-5005-20 Dual Gradient Density Polypropylene Sediment Cartridge
This Pentek DGD-5005-20 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.
Specifications
| Nominal filtration rating (pre-filter) | 50 microns |
| Nominal filtration rating (post-filter) | 5 microns |
| Initial pressure drop at 20 gpm | <1> |
| Temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 20 x 4-1/2 inches (508 x 114 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"
- Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water
- Combines two separate gradient layers for higher efficiency and dirt-loading capacity
- Spun polypropylene for resistance to chemicals and bacteria
- Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
- Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C).
This Pentek DGD-5005 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.
Specifications
| Nominal filtration rating (pre-filter) | 50 microns |
| Nominal filtration rating (post-filter) | 5 microns |
| Initial pressure drop at 10 gpm | <1> |
| Temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 10 x 4-1/2 inches (254 x 114 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek P5 Spun Polypropylene Filter Cartridge, 9-3/4" x 2-3/8", 5 Microns
- Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water
- Nominal filtration rating of 5 microns
- Spun polypropylene for resistance to chemicals and bacteria
- Initial pressure drop of 0.2 psi at a flow rate of 5 gpm
- Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C).
This Pentek P5 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of 0.2 pound per square inch (psi) at a flow rate of 5 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.
Specifications
| Nominal filtration rating | 5 microns |
| Initial pressure drop at 5 gpm | 0.2 psi |
| Temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 9-3/4 x 2-3/8 inches (248 x 60 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Pentek R50-BB Pleated Polyester Filter Cartridge, 9-3/4″ x 4-1/2″, 50 Microns
- Reduces sand, dirt, silt, rust, and scale particles in residential and commercial water
- Nominal filtration rating of 50 microns
- Non-woven polyester media pleated around a polypropylene core for strength
- Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
Pentek CBC-10 Carbon Block Filter Cartridge, 9-3/4″ x 2-7/8″, 0.5 Micron
- Reducesfine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water
- Nominal filtration rating of 0.5 micron
- Bonded PAC media with polyolefin wraps and polyethylene netting
- Initial pressure drop of 3.7 psi at a flow rate of 2 gpm
- Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
Pentek S1 Whole House Filter, Replacement Cartridge
Pentek NCP-20 Pleated Carbon-Impregnated Polyester Filter Cartridge, 20" x 2-1/2", 10 Microns
- Reduces sediment and chlorine taste and odor in residential and municipal drinking water
- Nominal filtration rating of 10 microns
- Carbon-impregnated polyester media pleated around a polypropylene core for strength and resistance to bacteria
- Initial pressure drop of 2 psi at a flow rate of 5 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
This Pentek NCP-20 pleated carbon-impregnated polyester filter cartridge reduces sediment and chlorine taste and odor in residential and municipal drinking water. It has a nominal filtration rating of 10 microns at an efficiency of 85%. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 50% in up to 450 gallons at a flow rate of 2 gallons per minute (gpm). The cartridge is made of carbon-impregnated polyester media pleated around a rigid polypropylene core with plastisol end caps for strength and resistance to bacteria. It has an initial pressure drop of 2 pounds per square inch (psi) at a recommended flow rate of 5 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is for use in rural, residential, and municipal drinking water purification.
Specifications
| Nominal filtration rating | 10 microns |
| Initial pressure drop at 5 gpm | 2 psi |
| Chlorine reduction capacity | 450 gallons at 2 gpm |
| Temperature range | 40 to 125 degrees F (4.4 to 51.7 degrees C) |
| Maximum dimensions (H x W) | 20 x 2-1/2 inches (508 x 64 mm) |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 50%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek EPM-20BB Carbon Block Filter Cartridge, 20" x 4-5/8", 10 Microns
- none
- Imported
- Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
- Nominal filtration rating of 10 microns
- Bonded PAC media with polyolefin pre-filter and polyethylene netting for extended life
- Initial pressure drop of 4 psi at a flow rate of 4 gpm
- Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
This Pentek EPM-20BB carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 10 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 30,000 gallons at a flow rate of 4 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in polyolefin with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 4 pounds per square inch (psi) at a flow rate of 4 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.
Specifications
| Nominal filtration rating | 10 microns |
| Initial pressure drop at 4 gpm | 4 psi |
| Chlorine reduction capacity | 30,000 gallons at 4 gpm |
| Temperature range | 40 to 180 degrees F (4.4 to 82.2 degrees C) |
| Maximum dimensions (H x W) | 20 x 4-5/8 inches (508 x 118 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Pentek WP.5BB97P String-Wound Polypropylene Filter Cartridge, 10" x 4.5", 0.5 Micron
Conclusion
By our suggestions above, we hope that you can found pentek sediment water filter cartridge for you.Please don’t forget to share your experience by comment in this post. Thank you!
