gadfurniture 
Nowadays, there are so many products of 48v dc hot water element in the market and you are wondering to choose a best one. You have searched for 48v dc hot water element in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 48v dc hot water element which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
DERNORD 24V 600W Submersible Water Heater Element with Double U Type Immersion Heater
- 24v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Easy to install for heater parts,Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
24V 600W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 24v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:24volts
Wattage:600 watts
Item Weight:10.6ounces
Product Diameter: 8mm
Tube length: 175mm
Screw Type:1” NPT
Color:White
Yosoo 1000W ZVS Low Voltage Induction Heating Board Module Tesla coil 12V-48V Flyback Driver Heater DIY
- This section of induction heating using low-voltage DC power supply 12-48V Maximum current 20A, maximum power 1000W.
- Tested 53V power supply when working properly.
- Because of its moderate power, can be used for small parts DIY players do hardening, annealing and other heat treatment, Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient.
- 24V input with no load current of 3A , 48V input with no load current of 6A
- The higher the voltage, the greater the heating current when the same thing, the effect is better, But at the same time heat is also large, so to eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough.
Note:
1. The kit contains a full set of driving circuit elements and brass
2. Buyers need to bring their own power and cooling unit.
3. The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.
4. The use of switching power supply Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components.
So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.
5. The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit.
Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload.
This circuit can not only do the induction heating, the copper tube into the high-frequency transformer, is a powerful inverter.
Note:
Make sure to thoroughly cool this while running anywhere near the specified limits (a very high CFM computer fan will help).
You must turn your power supply on first then put the power to the heater or you will burn it up.
Package includes:
1 x ZVS Low Voltage Induction Heating Board 1 x Brass
NOCO Genius G1100 6V/12V 1.1 Amp Advanced Battery Trickle Charger Maintainer
- Maintain | The most convenient way extend battery life during year-round battery maintenance or long-term storage of your car, boat, truck, RV, lawn mower, or any other vehicle.
- Charge | Also, completely recharge smaller capacity batteries on motorcycles, ATVs, snowmobiles, personal watercraft, scooters, and power wheels up to 30 amp-hours.
- Compatibility | Works with all types of 6-volt and 12-volt lead-acid batteries, including Wet, Gel, and AGM, or any common automotive, deep-cycle, marine, or maintenance-free battery.
- Worry-free | Keep your battery fully charged year-round without worry and zero overcharge. Simply plug-in and let our advanced charging technology automatically monitor and maintain your battery.
- 12V Lithium | An optimized charge mode for safely charging and maintaining 12-volt lithium-ion batteries, and recommended with use on Lithium batteries with an internal BMS.
- Included | One of the most advanced and safest battery trickle chargers – including spark-proof, and reverse polarity protection – battery clamps with integrated eyelets, and a 5-year warranty.
DERNORD 12V 300W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPT Fitting Double U Type
- 12v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
12V 300W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 12v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:12 volts
Wattage:300 watts
Item Weight:7.9 ounces
Product Diameter: 8mm
Tube length: 175mm
Screw Type:1”NPT
Color:White
DERNORD 12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPT Fitting Double U Type
- 12v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
12V 600W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 12v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:12 volts
Wattage:600 watts
Item Weight:10.95 Ounces
Product Diameter: 8mm
Tube length: 170mm
Screw Type:1”NPT
Color:White
DERNORD 48V 1500W Submersible Water Heater Element Immersion Heating Element
- 48v heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
48V 1500W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 48v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:48 volts
Wattage:1500 watts
Item Weight:10.65 Ounces
Product Diameter: 8mm
Tube length: 7.5 Inch
Screw Type:1”NPT
Color:White
DC 48v 600w solar submersible bore hole deep well water pump+mppt controller pump 3" high pressure garden irrigation kits hot 80m head pump kit 3,000l/h US
- ❤【Features】Solar water pump, 304 stainless steel deep well submersible pump, durable for home and industrial use.
- ❤【Alloy mechanical seal】Longer working life and high reliability. It also protects the submersible pump from frequent start up in low light conditions, overheating &
- running dry.
- ❤【Intelligent water shortage protection】The pump stops working automatically when there is no water in the well, and automatically start working 15-30 minutes later.
- ❤【MPPT controller】The solar water pump controller drives the high efficient brush-less DC pump motor,utilizing the latest MPPT technology to ensure maximum flow is delivered under all light conditions
- ❤【Guarantee】Our products are shipped locally from the US, quickly arrived through UPS/USPS/FEXDE. If you have any questions, please contact us and we will respond to your information within 24 hours
Specifications:
Rated power:600W
Max. Pump rate: 3,000L/H
Max. Head: 80m
Max. Temperature of water handled: 35 degree Celsius
Outlet diameter: 1.25 inch
Pump Size: 3 inch
Length of cable: 2m
Best Open circuit voltage range: 60-90V（not more than 100V）
Solar panels：4*280-330W（not included）
Impeller material: Plastic
Brass outlet/connector/oil cylinder.
Product size: 101*24*14cm
Weight: 11kg
Features:
Solar water pump, 304 stainless steel deep well submersible pump, durable for home and industrial use.
MPPT controller:
The solar water pump controller drives the high efficient brush-less DC pump motor, utilizing the latest MPPT technology to ensure maximum flow is delivered under all light conditions. It also protects the submersible pump from frequent start up in low light conditions, overheating & running dry.
Alloy mechanical seal:
Longer working life and high reliability.
Intelligent water shortage protection:
The pump stops working automatically when there is no water in the well, and automatically start working 15-30 minutes later.
Package：
1*solar pump
1*MTTP controller
Thermostatic PTC Heating, Keenso Housing Constant Temperature Conductive PTC Ripple Heating Plate Thermistors Heater 1000W 36V/48V(Optional) (48V 1000W)
- 【Wide Applicability】This PTC product is generally used in wax melter heater, steam generator heater, boiler heater, water heater, insulating cup heater, milk heater, coffee heater, glue machine heater, hot melt gun heater, chocolate extruder heater, etc.
- 【Energy Saving】PTC products have the characteristics of automatic energy saving. When the heater raises the ambient temperature, its power will gradually decrease, only 90%, 80% or much less of the rated power.
- 【Superior Advantage】PTC products have incomparable advantages over traditional heating elements, such as constant temperature heating, no fire, high heat conversion rate, minimal influence by power supply voltage, etc.
- 【High Quality】100% brand new and high quality. The PTC product can be dried for a long time and is suitable for heating solids and gases. The service life of the product is long. The general standard is that the power attenuation after 2000 hours is less than 10%.
- 【Warm Tips】PTC heating core can not be directly immersed in liquid. It can be dry-fired in air, placed at the bottom of the container of liquid, or contacted with solid medium. The surface of the product is electrified. Caution should be taken when using it.
Keenso–
1000W 36V/48V Housing Constant Temperature PTC Ripple Heating Plate Thermistors Heater.
Specification:
Power: 1000W
Voltage: 36V; 48V(Optional)
Surface temperature: 230±10°C
Product dimension: 130*130*18mm / 5.1*5.1*0.7in(Ripple size: 110*100*15mm)
Heating object: Solid and gas
Weight: 165g / 5.8oz
Heating life (in theory): 3 years or more
Package list:
1 * Ripple Element Heater(without cable)
Note:
1.The actual product color may deviate from the photo due to light.
2.There may be a slight deviation in the measurement of product.
Tool Parts 10 pcs 12x100mm /0.47×3.94" Stainless Steel Cartridge Heater, 300W/375W/490W Single End Hot Rod Heating Element – (Color: 48V, Specification: SMLS304 12x100mm490W)
10 pcs 12x100mm /0.47×3.94″ Stainless Steel Cartridge Heater, 300W/375W/490W Single End Hot Rod Heating Element
Specifications:
Product Name: Cartridge Heater
Material: 201SUS/304SUS/304SMLS
power:300W/375W/490W
voltage:AC12V/24V/36V/48V/110V/120V/220V/240V/270V/380V/400V/420V/440V
heater pipe diameter D: 12mm/0.47”
heater pipe length L: 100mm/3.94”
value of withstand voltage: 1800V/5S
value of insulatioon: 150M
working temperature: less than 400 degress celsius
use: plastic molding and processing mould, food packaging machine,glass machinery,woodworking machinery,environmental protection machine,pharmaceutical machinery,Toaster Oven
package Contents: 10 pcs Cartridge Heaters
note:if the specification are not your need,please contact us.we can make it according to your need.
Item specifics:
Model number: 12x100mm Cartridge Heater
Usage: Commercial Manufacture
Material: Stainless Steel
Is customized: Yes
Type: Other
Product name: Cartridge Heater
Model number: 12x100mm /0.47×3.94″
Voltage: 12V/24V/36V/48V/110V/120V/220V/240V/270V/380V/400V/420V/440V
Power: 300W/375W/490W
Material: 201SUS/304SUS/304SMLS
Applications 1: Cartridge heater for plastic molding and processing mould
Applications 2: Cartridge heaters for abrasives heating
Applications 3: Glass machinery,woodworking machinery,Toaster Oven environmental prote
Applications 4: Single end heating tube for electric oven, rice cooker
Function: Heating parts for electric oven, rice cooker
Type: Cartridge Heating Rod
Pro Chaser 36V 48V DC to DC Step Down to 12V Power Reducer Converter 30 Amp 360 Watt – Performace Water Resistance Power Converter with Harness & Butt Connectors
- Specifically designed for Golf Carts & RVs with 36V (six 6V battery set) or 48V (six 8V battery set) battery pack.
- Converts for head-lights, tail-lights, radios, solar panels and etc.
- Harness (matched male &female connector) and fitted butt connectors included for easy connect/disconnect application.
- Laser print on the surface. Easy ventilation design with aluminum cast shell. Completely sealed water resistant case.
- Please follow the last picture in the photo gallery for wiring instruction.
Input voltage: 36V 48V(36V – 48V) rated voltage
Output Voltage: 12V
Working Current: 30 amp
Working Power: 360 watt
Please note the power converter works with any battery packs of working voltage ranging from 36 volt to 48 volt but not higher or lower. The input voltage is preset from manufacture and it is non-adjustable.
The Key Switch wire (thin red wire) is to be connected to the key switch behind the dash. If you don’t have a lock switch, merge the two red wire together and connect both to positive input end.
Measurements:
22.2cm*8.8cm*4.8cm
8.74’’*3.5’’*1.9”
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found 48v dc hot water element for you.Please don’t forget to share your experience by comment in this post. Thank you!
