gadfurniture 
Nowadays, there are so many products of 3 in 1 capacitor refrigerator in the market and you are wondering to choose a best one. You have searched for 3 in 1 capacitor refrigerator in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 3 in 1 capacitor refrigerator which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
RCO410 3-in-1 Hard Start Capacitor Kit for Freezer & Refrigerator Compressors by PartsBroz – Replaces Part Numbers TJ90RCO410, AP4503017, 600-410, ERP410, HS410, RC0410, RCO-410, RCO410
- ✅ PART NUMBER RCO410: It’s a high-quality exact replacement part for part numbers RCO410, HS410, TJ90RCO410, AP4503017, 600-410, and ERP410.
- ✅ FOR COMPRESSOR SIZES 1/4 to 1/3: Part RCO410 fits several different compressor types including RSIR, CSIR, PSC, and CSR compressors. Use it to repair residential and commercial fridges and freezers.
- ✅ EXTENDS LIFE OF YOUR COMPRESSOR: A hard start kit helps your fridge or freezer compressor last longer. It also allows the compressor to work more efficiently, which will help to lower your power bill.
- ✅ DIY-FRIENDLY, 3-in-1 DEVICE: It’s a combination overload, capacitator, and relay device. It replaces all three electrical components of a capillary fridge or freezer system at once to avoid damaging the compressor.
- ✅ HIGH-QUALITY DESIGN: This exact equivalent part is durably made and intelligently designed to work with nearly all refrigerator system makes and models. Plus, it’s pre-wired for easy installation.
A hard start kit increases the efficiency of your refrigerator or freezer’s compressor. Not only does this extend the life of your compressor, but it also helps you save money on your power bill. For DIYers, a three-in-one, pre-wired start kit like this one is your best option. It replaces all three electrical components at once, so you don’t have to worry about accidentally damaging the compressor with mismatched parts. Use it with any 1/4 to 1/3 sized compressor.<>
Fits Several Compressor Types
Use this high-quality exact equivalent hard start kit with nearly any residential or commercial refrigerator system. Compatible compressor types include: RSIR, CSIR, PSC, and CSR.
Replaces Several Part Numbers
Know what part number you’re looking for? This hard start kit replaces part numbers RCO410, HS410, TJ90RCO410, AP4503017, 600-410, and ERP410.
Please reach out to us if you have a question about compatibility. Comment below in the customer questions and answer section, or send us a message on the PartsBroz storefront. We’re happy to help ensure you select the right part number.
Supco RCO810 3 n’ 1 START Hard Start Kit
Product Description
This 3 in 1 start kit is for compressors with horse power of 1/12 through 1/5.
From the Manufacturer
This 3 in 1 start kit is for compressors with horse power of 1/12 through 1/5.
Wadoy RCO410 3 in 1 Compressor Hard Start Capacitor Kit For Refrigerators & Freezers 1/4-1/3 H.P. 115VAC (1)
- Replacement for model No. RCO410 (HS410)
- For compressor sizes 1/4 through 1/3 H.P. Voltage-115VAC
- Application Residential and Commercial Refrigerators and Freezers, For Use With RSIR, CSIR, PSC, and CSR Compressors, Includes Relay, Overload and Start Capacitor Refrigeration
- Extremely durable,long lasting refrigerators and freesers and easy to install
- Non-original aftermarket part
Specifications
●Replacement for model No. RCO410 (HS410)
●For compressor sizes 1/4 through 1/3 H.P. Voltage-115VAC
●Application Residential and Commercial Refrigerators and Freezers, For Use With RSIR, CSIR, PSC, and CSR Compressors, Includes Relay, Overload and Start Capacitor Refrigeration
●Extremely durable,long lasting refrigerators and freesers and easy to install
Installation Instructions
1. Disconnect power supply.
2. Remove old relay and overload.
3.Push terminal connected to white wire on RCO onto start terminal of compessor.
4. Push terminal connected to red wire on RCO onto run terminal of compressor.
5.Push terminal connected to black wore on RCO onto common terminal of compressor.
6.Connect one line wire which was removed from old relay to one of the line wrres of the RCO,using wire nut.
7.Connect other line wire which was removed from the old Overload to other line wire of the RCO,using wire nut.
RCO210 3 in 1 Hard Start Capacitor Replacement Compatible with Supco Relay Overload 1/12 hp- 1/2 hp Compressors Voltage-115VAC
- RCO210 – RSC Series Solid State Relay Overload & Start Capacitor Combination Compatible with Supco
- For compressor sizes 1/12 HP through 1/2 HP. Voltage-115VAC
- Replaces all 3 electrical components – relay, overloard and start capacitor on all capillary systems.
- The 3 n’1 Start Relay adds new life to old refrigerators and freezers by providing an additional boost to the compressor
- This product is not original part,The replacement parts come with 90 days warranty. For any reason you are not completely satisfied, please feel free to contact us for a replacement or full refund.
Specifications
●Replacement for model No. RCO210
●Applications One size for all compressors from 1/12 hp through 1/2 hp.
●Maximum RLA 13.3 Amps
●Mounting: Quick Connect HP RATING – 1/2
●Solid-state Hard-start Relay, includes relay, overload, and start capacitor.
●Provides a boost for hard start and unbalanced systems
●Prevents low voltage starting problems
●No additional wires required
●Used For domestic and commercial refrigeration systems and freezers
Installation Instructions
1. Disconnect power supply.
2. Remove old relay and overload.
3. Push terminal connected to white wire on RCO onto start terminal of compessor.
4. Push terminal connected to red wire on RCO onto run terminal of compressor.
5. Push terminal connected to black wore on RCO onto common terminal of compressor.
6. Connect one line wire which was removed from old relay to one of the line wrres of the RCO,using wire nut.
7. Connect other line wire which was removed from the old Overload to other line wire of the RCO,using wire nut.
Raven RCO410 3 in 1 Compressor Hard Start Capacitor Kit for Refrigerators & Freezers 1/4-1/3 H.P. 115VAC
- ✅ CONTENTS: 1 Compressor hard start capacitor and 2 wire nuts
- ✅ COMPATIBILITY: Use it for compressor sizes 1/4 to 1/3. Part RCO-410 fits several different compressor types including RSIR, CSIR, PSC, and CSR compressors. Use it to repair residential and commercial fridges and freezers. Replaces parts number RCO410, HS410, TJ90RCO410, AP4503017, 600-410, and ERP410
- ✅ PERFORMANCE: It’s a combination overload, capacitator and relay device. It replaces all three electrical components of a capillary fridge or freezer system at once to avoid damaging the compressor
- ✅ HIGH-QUALITY DESIGN: This exact equivalent part is durably made and intelligently designed to work with nearly all refrigerator system makes and models. Plus, it’s pre-wired for easy installation
- ✅ 100% MONEYBACK GUARANTEE: We offer 90 days return and 365 days replace (at no charge) after the date of original purchase for risk-free purchase
A hard start kit increases the efficiency of your refrigerator or freezer’s compressor. Not only does this extend the life of your compressor, but it also helps you save money on your power bill.
For DIYers, a three-in-one, pre-wired start kit like this one is your best option. It replaces all three electrical components at once, so you don’t have to worry about accidentally damaging the compressor with mismatched parts. Use it with any 1/4 to 1/3 sized compressor.
Fits Several Compressor Types
Use this high-quality exact equivalent hard start kit with nearly any residential or commercial refrigerator system. Compatible compressor types include: RSIR, CSIR, PSC, and CSR.
Installation Instructions
1. Disconnect power supply. 2. Remove old relay and overload.
3. Push terminal connected to white wire on RCO onto start terminal of compressor. 4. Push terminal connected to red wire on RCO onto run terminal of compressor.
5. Push terminal connected to black wore on RCO onto common terminal of compressor. 6. Connect one-line wire which was removed from old relay to one of the line wires of the RCO, using wire nut.
7. Connect other line wire which was removed from the old Overload to other line wire of the RCO, using wire nut.
AMI PARTS RCO810 Hard Start Capacitor Kit 3 In 1 Relay Capacitor Overload for Refrigerator
- √PARTS NUMBER: RCO810 Hard Start Capacitor.
- √Replaces part numbers: RCO810, HS810, WRX-8.
- √Superiority: Saves you a service fee from the appliance guy! Inexpensive way to fix or repair.
- √QUALITY GUARANTEED: The replacement part is made from durable high quality material and well-tested by the manufacturer.
- √PROMISE: For any reason you’re not completely satisfied, you can ask for a replacement or full refund.
AMI PARTS RCO810 Hard Start Capacitor.
Includes relay, capacitor, and overload device.
110 to 125 V AC.
Compatible with any units that have 1/12 to 1/5 HP compressor systems.
Please Note:The brand name or model designation for this product is made solely for purposes of demonstrating compatibility.
Installation Instructions: 1. Disconnect power supply. 2. Remove old relay and overload. 3. Push terminal connected to white wire on RCO onto start terminal of compessor. 4. Push terminal connected to red wire on RCO onto run terminal of compressor. 5. Push terminal connected to black wire on RCO onto common terminal of compressor. 6. Connect one line wire which was removed from old relay to one of the line wire of the RCO,using wire nut. 7. Connect other line wire which was removed from the old Overload to other line wire of the RCO,using wire nut.
3 In 1 Hard Start Kit for Refrigerator Relay Capacitor Overload RCO810
- Replacement OEM Part: RCO810
- This 3 in 1 start kit is for compressors with horse power of 1/12 through 1/5. 110 to 125VAC. Totally pre-wired
- Solid state relay and overload start capacitor. Replaces 3 electrical components. Works on domestic and commercial refrigerators.
- All Our Parts Are Factory Approved For A Proper Fit
- This is the non-original aftermarket parts
SUPCO RCO410 3-In-1 Hard Start Kit for Refrigerators
Combination relay, capacitor and overload to replace all three electrical components to rejuvenate older refrigerators and freezers. Solid state design for maximum mounting flexibility. Mounts easily with either screw or clip. Models adapt to 115V and 240V compressors having external overload protectors. Instructions on label make installation a snap.
Conclusion
By our suggestions above, we hope that you can found 3 in 1 capacitor refrigerator for you.Please don’t forget to share your experience by comment in this post. Thank you!
